Magnetic resonance imaging (MRI) site planning and economics

Site planning and economic forecasting for MRI require careful, individualized analysis of several possible sites. Particular attention should be accorded to the magnetic environment. Realistic estimates of financial feasibility will depend heavily on decisions of regulators and third-party payers.     

Towards a Dual-Tip STM Application in Mesoscopic Electron Transport

A new design for a dual-tip scanning tunneling microscope (STM) is presented. The design is a variation on the mechanically controllable break-junction with two electron beam-induced deposition nano-tips. The new design enables one to scan surfaces simultaneously with two probes having a nano-gap separation. By collecting the lateral current flowing between the tips, the transconductance map can then be compared with the STM images for local characterizations of the electron transport. Since the lateral beam carries the property of the density of states of the surface at momentum space, the dispersion of the electronic structure should give an orientation and position dependence of the local transconductance current. In addition, the reduced terminal separation, on the order of the characteristic mesoscopic length scales, is likely to be sensitive to a variety of typically observed interactions and interference effects.     

Potential of microbial growth control in water hydraulic systems by UV‐irradiation and filtration

Water hydraulic systems use water as a pressure medium and, thus, do not pose such adverse environmental impacts as oil hydraulics. Microbial deterioration of the pressure medium and biofouling of the surfaces restrict the applicability of the water‐based technology. The potential of microbial growth control by UV‐irradiation and filtration was studied in a pilot‐scale water hydraulic system. The UV‐irradiation (25 m Ws cm^?2) of the pressure medium reduced the total viable counts of bacteria by 1–2 log₁₀ cfu cm^?3, whereas the total microbial cell numbers and the numbers of surface‐attached microorganisms remained unaffected. Prefiltration (1.2 µm, absolute) of the pressure medium decreased the total microbial cell number in the water phase and retarded the attachment of bacteria. The filtration during the operation (2 µm, absolute) decreased the total numbers of microbial cells and the total viable counts in the pressure medium, and microbial attachment on the surfaces. Microbial attachment was not prevented by filtration. The microbial water quality obtained by pre‐ and on‐line filtration of the pressure medium was sufficient to ensure the long‐term operation of the water hydraulic system assuming that clean work practices are complied with in assembly and during the operation. © 2002 Society of Chemical Industry     

Hydrogels based on graft copolymers of collagen synthesis

Graft copolymerization of 2-hydroxyethyl methacrylate in combination with hydrophobic monomers onto soluble collagen was employed in the synthesis of hydrogels. The hydrogels were formed by simultaneous graft copolymerization and crosslinking. In order to study the effect of various crosslinking agents on the water retention character of the hydrogels, three different crosslinking agents, namely, N,N′-methylene bis acrylamide, 1,4-butanediol dimethacrylate, and hexamethylene urethanediacrylate were used. Hexamethylene urethanediacrylate crosslinked systems require a minimum amount of crosslinking agent to attain maximum water content in comparison to the other systems.     

UV-shielding by a polyurethane/f-Oil fly ash-CeO2 protective coating

A waste material called oil fly ash (OFA) was acid-functionalized, yielding f-OFA-COOH, which was then reacted with cerium oxide (CeO₂) to make CeO₂-functionalized OFA, or f-OFA-CeO₂. Pristine OFA and f-OFA-CeO₂ were used to make waterborne polyurethane (WBPU) dispersions, referred to as WBPU/OFA and WBPU/f-OFA-CeO₂, respectively, with defined OFA and f-OFA-CeO₂ content. All the dispersions were applied to mild steel as organic coatings to evaluate their protective properties, such as their hydrophobicity, adhesive strength and UV-shielding resistance. These protective properties varied based on the OFA and f-OFA-CeO₂ content. The highest water contact angle, minimum water swelling and maximum adhesive strength were found using WBPU/f-OFA-CeO₂-20 coating (using 2.00 wt% f-OFA-CeO₂), which also showed the maximum ultraviolet (UV) absorption via UV–vis spectroscopy analysis. This UV shielding result also matched field test results, as that coating was found to exhibit the lowest UV degradation near a marine atmosphere, as shown by X-ray photoelectron spectroscopy (XPS) analysis. The least affected hydrophobicity was also recorded for the sample with the WBPU/f-OFA-CeO₂-20 coating.     

A robust estimation approach for uncertain systems with perturbed measurements

This paper deals with state estimation problem for uncertain continuous‐time systems. A numerical treatment is proposed for designing interval observers that ensures guaranteed upper and lower bounds on the estimated states. In order to take into account possible perturbations on the system and its outputs, a new type of interval observers is introduced. Such interval observers consist of two coupled general Luenberger‐type observers that involve dilatation functions. In addition, we provide an optimality criterion in order to find optimal interval observers that lead to tight interval error estimation. The proposed existence and optimality conditions are expressed in terms of linear programming. Also, some illustrative examples are given. Copyright © 2015 John Wiley & Sons, Ltd.     

Preference-based content replacement using recency-latency tradeoff

This work introduces and establishes a new model for cache management, where clients suggest preferences regarding their expectations for the time they are willing to wait, and the level of obsolescence they are willing to tolerate. The cache uses these preferences to decide upon entrance and exit of objects to and from its storage, and select the best copy of requested object among all available copies (fresh, cached, remote). We introduce three replacement policies, each evicts objects based on ongoing scores, considering users’ preferences combined with other objects’ properties such as size, obsolescence rate and popularity. Each replacement algorithm follows a different strategy: (a) an optimal solution that use dynamic programming approach to find the best objects to be kept (b) another optimal solution that use branch and bound approach to find the worst objects to be thrown out (c) an algorithm that use heuristic approach to efficiently select the objects to be evicted. Using these replacement algorithms the cache is able to keep the objects that are best suited for users preferences and dump the other objects. We compare our proposed algorithms to the Least-Recently-Used algorithm, and provide evidence to the advantages of our algorithms providing better service to cache’s users with less burden on network resources and reduced workloads on origin servers.     

Response surface single loop reliability-based design optimization with higher-order reliability assessment

Reliability-based design optimization (RBDO) aims at determination of the optimal design in the presence of uncertainty. The available Single-Loop approaches for RBDO are based on the First-Order Reliability Method (FORM) for the computation of the probability of failure, along with different approximations in order to avoid the expensive inner loop aiming at finding the Most Probable Point (MPP). However, the use of FORM in RBDO may not lead to sufficient accuracy depending on the degree of nonlinearity of the limit-state function. This is demonstrated for an extensively studied reliability-based design for vehicle crashworthiness problem solved in this paper, where all RBDO methods based on FORM strongly violates the probabilistic constraints. The Response Surface Single Loop (RSSL) method for RBDO is proposed based on the higher order probability computation for quadratic models previously presented by the authors. The RSSL-method bypasses the concept of an MPP and has high accuracy and efficiency. The method can solve problems with both constant and varying standard deviation of design variables and is particularly well suited for typical industrial applications where general quadratic response surface models can be used. If the quadratic response surface models of the deterministic constraints are valid in the whole region of interest, the method becomes a true single loop method with accuracy higher than traditional SORM. In other cases, quadratic response surface models are fitted to the deterministic constraints around the deterministic solution and the RBDO problem is solved using the proposed single loop method.