The impacts of a GTL plant on Brazil's oil products supply and refinery expansion

This paper assesses the impacts of a GTL plant on the expansion of Brazil's oil refining segment. The GTL plant (50,000 bpd) was sized to start up operations in 2015, producing diesel and naphtha through the indirect route (FT-synthesis). This plant will consume the non-associated natural gas production from the recent discoveries at the Santos Basin (around 419 Bm³), and the associated gas production from the Campos Basin. Both basins are located in the Southeast of Brazil, the most populated, rich and industrialized region of the country. Two different criteria for refinery expansion were simulated in order to meet oil product demand scenarios. Findings show that depending on the refinery expansion criteria considered GTL will play a fundamental hole to meet the oil product demand forecast to Brazil in the next 10 years.     

A rubber-modified thermoplastic where the morphology produced by phase-separation induced by polymerization disappears at high conversions

An unexpected experimental finding is reported where the primary morphology developed during polymerization-induced phase separation in a rubber-modified thermoplastic practically disappears at high conversions. This process was evidenced by light scattering (LS) and scanning electron microscopy (SEM) for a particular composition of solutions of polyisobutylene oligomers (PIB) in isobornylmethacrylate (IBoMA), during the free-radical polymerization of the monomer. The primary phase separation produced a dispersion of domains rich in PIB containing significant amounts of the monomer (IBoMA). Polymerization of the monomer in these domains occurred at high overall conversions producing the filling of dispersed domains with a PIBoMA-PIB blend that could not be distinguished from the matrix. Under these conditions the final material had the appearance of a homogeneous blend.     

Grouped Approach for the Design of H.264/AVC Motion Estimation Architectures

This letter presents a novel approach for organizing computational resources into groups within H.264/AVC motion estimation architectures, leading to reductions of up to 75% in the equivalent gate count with respect to state‐of‐the‐art designs.     

Study of the beta -delayed neutron decay of 18N

The shortage of suitable liver donors for children has motivated the use of ABO-incompatible (ABO-I) grafts for transplantation in urgent situations. However, survival after ABO-I liver grafts has been reported at about 30% as compared with 80% in cases of ABO-identical or -compatible liver grafts. This difference has been attributed to antibody-mediated, hyperacute or chronic liver rejection, due to preformed ABO antibodies (alloantibodies). In this study, we report our results with ABO-I livers in children without alloantibodies at the time of transplantation. From January 1988 to June 1993, 143 OLT were performed in 122 children. Eight children received 8 ABO-I liver grafts. Of these, 7 patients were included in the study. All 7 were alloantibody free before OLT. Five children were spontaneously alloantibody free, while in 2 children, the plasma alloantibodies were eliminated before and after transplantation using intravenous infusion of specific blood group antigens of the donor blood group (soluble antigens). Immunosuppression consisted of a triple-drug treatment combining CsA, AZA, and steroids. The follow-up period was between 10 and 48 months. One child died from a surgical complication. Six children survived, but 1 died 10 months later from intestinal obstruction. There were no graft losses and no episodes of hyperacute or chronic rejection. The graft and patient survival rate was 71%. There was a 28% incidence of rejection, but all were mild (requiring steroid boluses only). Our results suggest that the absence of ABO alloantibodies at the time of and after transplantation can protect ABO-I liver grafts against antibody-mediated rejection, whether hyperacute or chronic, and that soluble antigens are effective in eliminating alloantibodies in children.     

Photovoltaic characterization of amorphous hydrogenated and chlorinated silicon films

Hydrogenated and chlorinated silicon films were used to deposit Schottky barrier solar cells. Photovoltaic characterization, together with the results of electronic transport measurements, led to the conclusion that the presence of chlorine is detrimental to the properties of this kind of device.     

High-electric-field effects and degradation of AlGaAs/GaAs power HFETs: a numerical study

This work presents a numerical study of high-field degradation and reliability issues of AlGaAs/GaAs power HFETs. A commercial two-dimensional drift–diffusion tool is used to investigate electric-field distributions, the effects of electron capture at the device surface under hot-carrier conditions, and the impact of drain recess scaling on such effects. Wherever experimental data are available for direct comparison, a good match is observed with our simulations. The main results of this study are (1) a validation of the hypothesis that attributes the main high-field degradation effects to electron capture over the gate–drain access region, and (2) design indications pointing out to the possibility of a reverse correlation between the gate–drain breakdown voltage and the device hot-carrier reliability.     

The multicultural perspective in therapy: A social constructionist approach.

Discusses the theoretical and clinical applications of the postmodern paradigm of social constructionism as a basis for counseling culturally different clients. Such applications avoid the trap of perpetuating the status-quo when working with minority and marginalized clientele. The main points of multiculturalism and social constructionism are summarized, and issues of mutual concern to both perspectives are examined. Applications to psychotherapy are explored, and the challenges of applying the social constructionist approach to culturally competent counseling are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A new pneumatic bearing dynamometer for power input measurement in stirred tanks

A turntable dynamometer has been constructed for the accurate measurement of power input and mixing applications in bench stirred tank reactors. The main feature of this device is a pneumatic bearing with complementary conical parts. The conical pneumatic bearing permitted to apply eccentric loads without affecting its stability. The static friction torque in the pneumatic bearing was very small, 4 × 10^?4 Nm, and can be neglected in the experimental ranges of measured torques, i.e. from 5 × 10^?3 to 2.21 Nm. In accordance with the instrumentation used, the deviations obtained with the apparatus are less than 10% at low torque readings. At moderate torques, deviations lower than 1% are routinely obtained. Several power input measurements show that the obtained data scatter is lower than 2.5%. The power input response in the turbulent regime is in agreement with dimensional analysis: the power input depends on the cube of the impeller speed. In addition, data obtained with a turbine impeller under ungassed conditions agree with the predictions of a published correlation, which takes into account several geometrical parameters.     

Effect of surface-modifying macromolecules and solvent evaporation time on the performance of polyethersulfone membranes for the separation of chloroform/water mixtures by pervaporation

Polyethersulfone (PES) membranes using different evaporation periods were fabricated by the phase-inversion method. Pervaporation experiments were conducted for chloroform/water mixtures to determine the selectivity of the PES membranes. It was found that chloroform could be concentrated in the permeate from chloroform/water binary feed mixtures by PES membranes prepared using longer evaporation periods, and that the selectivity of PES membranes in pervaporation could be reversed by shorter evaporation periods. This study also showed that by adding surface-modifying macromolecules (SMM) up to 1 wt % into the casting solution, chloroform enrichment in the permeate could be increased by 50%. Chloroform enrichment increased with increasing SMM concentration until an optimal value, after which the enrichment decreased. © 1994 John Wiley & Sons, Inc.