Activation of alphav beta3 integrin on human osteoclast-like cells stimulates adhesion and migration in response to osteopontin

Integrins mediate cell adhesion and can induce different cellular responses, including changes in intracellular pH, changes and oscillation in intracellular free calcium, and protein phosphorylation on tyrosine. During bone resorption, the integrin alphav beta3 regulates adhesion of osteoclasts to bone extracellular matrix proteins, such us osteopontin (Opn). Adhesion via alphav beta3 is followed by osteoclast polarization onto the bone surface and by the onset of bone resorption. To characterize these events at the molecular level, we investigated the state of activation of alphav beta3 on the human osteoclast-like cell line GCT23 using the monoclonal antibody AP5 which binds to and can induce, under low calcium conditions, activated alphav beta3. By flow cytometry, approximately 50% of alphav beta3 on the surface of the osteoclast-like cell line GCT23 was reactive with AP5 and was therefore in the activated state. Incubation with AP5 in the presence of low calcium concentrations increased activated alphav beta3 to 90-100%. Activation of alphav beta3 increased the efficiency of GCT23 adhesion to Opn by 2-fold. Furthermore, haptotactic migration on Opn was also enhanced about 40% compared to control. We propose that changes in the activation state of alphav beta3 may be a regulation point for osteoclasts during bone resorption.     

Homogeneous Plastic Flow of Fully Amorphous and Partially Crystallized Zr_(41.2)Ti_(13.8)Cu_(12.5)Ni_(10)Be_(22.5) Bulk Metallic Glass

The homogeneous plastic flow of fully amorphous and partially crystallized Zr(41.2)Ti(13.8)Cu(12.5)Ni(10)Be(22.5) bulk metallic glass (Vitl) has been investigated by compression tests at high temperatures in supercooled liquid region. Experimental results show that at sufficiently low strain rates, the supercooled liquid of the fully amorphous alloy reveals Newtonian flow with a linear relationship between the flow stress and strain rate. As the strain rate is increased, a transition from linear Newtonian to nonlinear flow is detected, which can be explained by the transition state theory. Over the entire strain rate interval investigated, however, only nonlinear flow is present in the partially crystallized alloy, and the flow stress for each strain rate is much higher. It is found that the strain rate-stress relationship for the partially crystaltized alloy at the given temperature of 646 K also obeys the sinh law derived from the transition state theory, similar to that of the initial homogeneous amo     

In situ and air index measurements: influence of the deposition parameters on the shift of TiO2/SiO2 Fabry-Perot filters

We measure the refractive index of thin films of TiO2 and SiO2 for given deposition parameters. Two complementary methods are used. The first is a postdeposition technique which uses the measurements of reflectance and transmittance in air. The second, in contrast, makes use of in situ measurements (under vacuum and during the actual deposition of the layer). The differences between the values deduced from the two methods can be explained by the amount of atmospheric moisture adsorbed by films. One tries to minimize these shifts for the two materials by choosing deposition parameters. The difficulties come from the absorption losses which must be as small as possible. We use the measured refractive indices of individual layers to give good numerical prediction of the wavelength shift (observed during the admittance of air after deposition in the vacuum chamber) of the transmittance peak of multidielectric Fabry-Perot filters.     

Optimizing BRDF orientations for the manipulation of anisotropic highlights

This paper introduces a system for the direct editing of highlights produced by anisotropic BRDFs, which we call anisotropic highlights. We first provide a comprehensive analysis of the link between the direction of anisotropy and the shape of highlight curves for arbitrary object surfaces. The gained insights provide the required ingredients to infer BRDF orientations from a prescribed highlight tangent field. This amounts to a non‐linear optimization problem, which is solved at interactive framerates during manipulation. Taking inspiration from sculpting software, we provide tools that give the impression of manipulating highlight curves while actually modifying their tangents. Our solver produces desired highlight shapes for a host of lighting environments and anisotropic BRDFs.     

Filamentary preforms of Al-13wt % Si alloy reinforced with TiC-coated and pre-treated carbon fibres

Filamentary preforms of aluminium-13 wt % Si alloy reinforced with TiC-coated carbon fibres were obtained by liquid metal infiltration using K₂ZrF₆ as wetting agent. The interfacial structure was investigated using analytical electron microscopy (TEM, SEM) and the fibre strength measured following each step of processing. The reaction between the K₂ZrF₆ deposit and the molten alloy is discussed on the basis of the reaction products formed at the fibre-matrix interface, which mainly consisted of fluoride compounds (K₃AlF₆), different zirconium-rich suicides (Si₂Zr, SiZr (Al), (Al, Si)₂Zr) and crystalline -alumina. Large amounts and/or inhomogeneous distributions of the K₂ZrF₆ deposit should be avoided, because the massive precipitation of colonies of intermetallics around fibres is conducive for the formation of harmful aluminium carbides and favours brittle fracture of the composite. The utilization of TiC-coatings formed by the reactive chemical vapour deposition process gave satisfactory results, both in terms of composite elaboration and fibre protection during liquid infiltration.     

Refractive indices of layers and optical simulations of Cu(In,Ga)Se2 solar cells

Cu(In,Ga)Se₂-based solar cells have reached efficiencies close to 23%. Further knowledge-driven improvements require accurate determination of the material properties. Here, we present refractive indices for all layers in Cu(In,Ga)Se₂ solar cells with high efficiency. The optical bandgap of Cu(In,Ga)Se₂ does not depend on the Cu content in the explored composition range, while the absorption coefficient value is primarily determined by the Cu content. An expression for the absorption spectrum is proposed, with Ga and Cu compositions as parameters. This set of parameters allows accurate device simulations to understand remaining absorption and carrier collection losses and develop strategies to improve performances.     

A network approach to the French system of legal codes—part I: analysis of a dense network

We explore one aspect of the structure of a codified legal system at the national level using a new type of representation to understand the strong or weak dependencies between the various fields of law. In Part I of this study, we analyze the graph associated with the network in which each French legal code is a vertex and an edge is produced between two vertices when a code cites another code at least one time. We show that this network distinguishes from many other real networks from a high density, giving it a particular structure that we call concentrated world and that differentiates a national legal system (as considered with a resolution at the code level) from small-world graphs identified in many social networks. Our analysis then shows that a few communities (groups of highly wired vertices) of codes covering large domains of regulation are structuring the whole system. Indeed we mainly find a central group of influent codes, a group of codes related to social issues and a group of codes dealing with territories and natural resources. The study of this codified legal system is also of interest in the field of the analysis of real networks. In particular we examine the impact of the high density on the structural characteristics of the graph and on the ways communities are searched for. Finally we provide an original visualization of this graph on an hemicyle-like plot, this representation being based on a statistical reduction of dissimilarity measures between vertices. In Part II (a following paper) we show how the consideration of the weights attributed to each edge in the network in proportion to the number of citations between two vertices (codes) allows deepening the analysis of the French legal system.     

A Secure Grid Medical Data Manager Interfaced to the gLite Middleware

The medical community is producing and manipulating a tremendous volume of digital data for which computerized archiving, processing and analysis is needed. Grid infrastructures are promising for dealing with challenges arising in computerized medicine but the manipulation of medical data on such infrastructures faces both the problem of interconnecting medical information systems to Grid middlewares and of preserving patients’ privacy in a wide and distributed multi-user system. These constraints are often limiting the use of Grids for manipulating sensitive medical data. This paper describes our design of a medical data management system taking advantage of the advanced gLite data management services, developed in the context of the EGEE project, to fulfill the stringent needs of the medical community. It ensures medical data protection through strict data access control, anonymization and encryption. The multi-level access control provides the flexibility needed for implementing complex medical use-cases. Data anonymization prevents the exposure of most sensitive data to unauthorized users, and data encryption guarantees data protection even when it is stored at remote sites. Moreover, the developed prototype provides a Grid storage resource manager (SRM) interface to standard medical DICOM servers thereby enabling transparent access to medical data without interfering with medical practice.     

Genetic programming for multibiometrics

Biometric systems suffer from some drawbacks: a biometric system can provide in general good performances except with some individuals as its performance depends highly on the quality of the capture… One solution to solve some of these problems is to use multibiometrics where different biometric systems are combined together (multiple captures of the same biometric modality, multiple feature extraction algorithms, multiple biometric modalities…). In this paper, we are interested in score level fusion functions application (i.e., we use a multibiometric authentication scheme which accept or deny the claimant for using an application). In the state of the art, the weighted sum of scores (which is a linear classifier) and the use of an SVM (which is a non linear classifier) provided by different biometric systems provide one of the best performances. We present a new method based on the use of genetic programming giving similar or better performances (depending on the complexity of the database). We derive a score fusion function by assembling some classical primitives functions (+, ∗, −, … ). We have validated the proposed method on three significant biometric benchmark datasets from the state of the art.