Electro-copolymerisation of indene and styrene

Electroinitiated cationic copolymerisation of indene and styrene was investigated by constant potential electrolysis. Effects of copolymerisation potential and temperature on the copolymer composition and the reactivity ratios are discussed. The reactivity ratios of the monomers were calculated according to the integrated Lewis-Mayo equation.     

Isolation of Decidual Macrophages and Hofbauer Cells from Term Placenta—Comparison of the Expression of CD163 and CD80

(1) Background: Placental immune cells are playing a very important role in a successful placentation and the prevention of pregnancy complications. Macrophages dominate in number and relevance in the maternal and the fetal part of the placenta. The evidence on the polarization state of fetal and maternal macrophages involved in both, healthy and pregnancy-associated diseases, is limited. There is no representative isolation method for the direct comparison of maternal and fetal macrophages so far. (2) Material and Methods: For the isolation of decidual macrophages and Hofbauer cells from term placenta, fresh tissue was mechanically dissected and digested with trypsin and collagenase A. Afterwards cell enrichment was increased by a Percoll gradient. CD68 is represented as pan-macrophage marker, the surface markers CD80 and CD163 were further investigated. (3) Results: The established method revealed a high cell yield and purity of the isolated macrophages and enabled the comparison between decidual macrophages and Hofbauer cells. No significant difference was observed in the percentage of single CD163⁺ cells in the distinct macrophage populations, by using FACS and immunofluorescence staining. A slight increase of CD80⁺ cells could be found in the decidual macrophages. Considering the percentage of CD80⁺CD163⁻ and CD80⁻CD163⁺ cells we could not find differences. Interestingly we found an increased number of double positive cells (CD80⁺CD163⁺) in the decidual macrophage population in comparison to Hofbauer cells. (4) Conclusion: In this study we demonstrate that our established isolation method enables the investigation of decidual macrophages and Hofbauer cells in the placenta. It represents a promising method for direct cell comparison, enzyme independently, and unaffected by magnetic beads, to understand the functional subsets of placental macrophages and to identify therapeutic targets of pregnancy associated diseases.     

What installed mobile applications tell about their owners and how they affect users’ download behavior

The rapid growth in the mobile application market presents a significant challenge to find interesting and relevant applications for users. An experimental study was conducted through the use of a specifically designed mobile application, on users’ mobile phones. The goals were; first, to learn about the users’ personality and the applications they downloaded to their mobile phones, second to recommend applications to users via notifications through the use of experimental mobile application and learn about user behavior in mobile environment. The question of how the personality features of users affect their compliance to recommendations is explored in this study. It is found that conscientiousness is positively related with accepting recommended applications and being agreeable is related with the preference for the applications of editor’s choice. Furthermore, in this study, applications owned by the user and the composition of applications under categories and their relation with personality features are explored. It is shown that the number of user owned applications and their category differ according to gender and personality. Having similar applications and the number of applications owned under specific categories increase the probability of accepting recommended applications.     

Electroinitiated cationic copolymerization by direct electron transfer

Electroinitiated cationic copolymerizations of indene-4-methoxystyrene and indene-β-bromostyrene monomer couples were investigated in dichloromethane by constant potential electrolysis. Copolymer compositions were determined by i.r. spectroscopy and reactivity ratios for the monomers were calculated according to integrated Lewis-Mayo equation. The composition of copolymers and the reactivity ratios were discussed in terms of anodic peak potentials of monomers.     

Microleakage in class V cavities prepared using conventional method versus Er:YAG laser restored with glass ionomer cement or resin composite

This study evaluated the effect of tooth preparation method (diamond bur vs. Er:YAG laser) on the microleakage levels of glass ionomers and resin composite. Human permanent premolars (N = 80) were randomly divided into two groups (n = 40). Cavities on half of the teeth were prepared using diamond bur for enamel and carbide bur for dentin and the other half using Er:YAG laser. The teeth were randomly divided into four groups according to the restoration materials, namely (a) ChemFil Rock (CFR), (b) IonoluxAC (IAC), (c) EQUIA system (EQA) and one resin composite (d) AeliteLS (ALS) (n = 10 per group). Microleakage (μm) was assessed at the occlusal and gingival margins after dye penetration (0.5% basic fuchsine for 24 h). On the occlusal aspect, while the cavity preparation types significantly affected the microleakage for CFR (p = 0.015), IAC (p = 0.001) glass ionomer restorations, it did not show significant effect for glass ionomer EQA (p = 0.09) and resin composite ALS (p = 0.2). Er:YAG laser presented less microleakage compared to bur preparation in all groups except for EQA. On the gingival aspect, microleakage decreased significantly for CFR (p = 0.02), IAC (p = 0.001), except for EQA where significant increase was observed (p = 0.001) with the use of Er:YAG laser. Microleakage decrease was not significant at the gingival region between diamond bur and Er:YAG laser for ALS (p = 0.663). At the occlusal and gingival sites in all groups within each preparation method, microleakage level was not significant.     

Ultrasound‐assisted bioscouring of cotton

In this study, the effects of ultrasound on the bioscouring of cotton by alkaline pectinase were examined. Conventional alkaline scouring was considered as the control treatment, and two different sources of ultrasound, an ultrasonic bath and an ultrasonic homogeniser, were tested, along with the enzymatic scouring process. Results indicated a clear increase in the efficiency of the enzymatic scouring process when the ultrasonic homogeniser was used: wettability time and wicking distance after ultrasonic homogeniser‐assisted bioscouring were much better than for enzymatic scouring without the use of ultrasound energy and almost the same as when conventional alkaline scouring was employed. Ultrasonic bath‐assisted enzymatic bioscouring gave slightly better results than enzymatic scouring without sonication. Reasons for the difference in efficacy of the ultrasound sources were postulated. Weight loss was increased by the use of ultrasonic equipment during enzymatic scouring. Fabric thickness and fabric strength was not significantly affected by the scouring processes. The environmental impact of the processes was also monitored by chemical oxygen demand measurement of the treatment liquors. Conventional alkaline scouring resulted in the highest environmental impact. Ultrasonic homogeniser‐assisted bioscouring also led to slightly higher chemical oxygen demand loads than other enzymatic processes owing to the more efficient removal of impurities.     

Substitution of Reduction Clearing Step by Ozone Treatment at Disperse Dyeing of Polyester

The effectiveness of ozone treatment for the afterclearing of disperse dyed poly (ethylene terephthalate) (PET) fibers has been examined. Two types of disperse dyed PET samples were selected among commercial mass production range of Akbaslar textile mill. The reduction clearing procedure applied during mass production was taken as the reference reduction clearing treatment; these reference samples were taken after dyeing and reduction clearing processes at the mill. Samples of disperse dyed PET were also taken before reduction clearing in order apply ozone treatment in the laboratory as the tested afterclearing method. Color and wash-fastness properties of the reduction cleared and ozone treated fabric samples were compared and reported. Results indicated acceptable color and wash-fastness results comparable to those of reduction cleared samples for ozone treated samples. The success of ozone treatment for the black dyed PET sample at 7.0% depth of shade was especially outstanding. Ozone treatment was applied in cold water without addition of any chemicals for very short treatment times when compared to conventional reduction clearing. Ozone treatment created substantial energy and chemical savings as well as lower environmental impact.     

Stabilized electrospinning of heat stimuli/in situ crosslinkable nanofibers and their self‐same nanocomposites

We present a strategy for stabilizing the morphological integrity of electrospun polymeric nanofibers by heat stimuli in situ crosslinking. Amorphous polymer nanofibers, such as polystyrene (PS) and its co‐polymers tend to lose their fiber morphology during processing at temperatures above their glass transition temperature (T_g) typically bound to happen in nanocomposite/structural composite applications. As an answer to this problem, incorporation of the crosslinking agents, phthalic anhydride (PA) and tributylamine (TBA), into the electrospinning polymer solution functionalized by glycidylmethacrylate (GMA) copolymerization, namely P(St‐co‐GMA), is demonstrated. Despite the presence of the crosslinker molecules, the electrospinning polymer solution is stable and its viscosity remains unaffected below 60 °C. Crosslinking reaction stands‐by and can be thermally stimulated during post‐processing of the electrospun P(St‐co‐GMA)/PA‐TBA fiber mat at intermediate temperatures (below the T_g). This strategy enables the preservation of the nanofiber morphology during subsequent high temperature processing. The crosslinking event leads to an increase in T_g of the base polymer by 30 °C depending on degree of crosslinking. Crosslinked nanofibers are able to maintain their nanofibrous morphology above the T_g and upon exposure to organic solvents. In situ crosslinking in epoxy matrix is also reported as an example of high temperature demanding application/processing. Finally, a self‐same fibrous nanocomposite is demonstrated by dual electrospinning of P(St‐co‐GMA) and stabilized P(St‐co‐GMA)/PA‐TBA, forming an intermingled nanofibrous mat, followed by a heating cycle. The product is a composite of crosslinked P(St‐co‐GMA)/PA‐TBA fibers fused by P(St‐co‐GMA) matrix. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44090.     

The effects of achromatic and chromatic color schemes on participants' task performance in and appraisals of an office environment

This study explores the effects of chroma on participants' performance and environmental appraisal of an office. The research was conducted in a full‐scale experimental room designed as a private office where achromatic and chromatic color schemes with coequal values were applied. Sixty participants were assigned tasks and given a questionnaire to appraise the spatial color schemes. The findings show that chroma significantly affects performance and space appraisal. In terms of accuracy and time spent performance scores measured significantly better in the room with the chromatic scheme than those in the room with the achromatic scheme. The office with the chromatic scheme was found to be more pleasant, attractive, satisfying and dynamic than the one with the achromatic scheme, whereas the achromatic scheme was thought to be more formal and harmonious. Categorization of pleasantness, harmony, dynamism and spaciousness by factor analysis also showed differences between the achromatic and chromatic schemes. © 2011 Wiley Periodicals, Inc. Col Res Appl, 2012     

The use of natural (Pinus pinaster) resin in the production of printing ink and the printability effect

Alkyd resins are generally used in the production of printing inks. All industries look for alternative raw materials in the production of ink with the growing inclination toward using natural products. Resins forming the vehicle of the ink to be obtained from natural resources will provide benefits for the environment, nature, and living creatures. The aim of the study was to promote the use of natural resin in the ink system. Natural Pinus pinaster resin was added into vegetable and mineral oil-based solvents in pure form with alkyd resin in different amounts and ink varnishes of different combinations were prepared. Then, printing inks were produced from these varnishes in pure and hybrid form. Following the assessment of the rheological properties of the inks prepared, printing tests were conducted to assess the printing quality parameters. Ideal mixing ratios of the natural resins in the ink were determined for printability. The environmental importance and advantages of the use of natural resins were discussed. Recommendations were given in line with the results to encourage widespread use of natural resins in near future.