A method of estimating the standard gibbs free energy of formation

Standard Gibbs free energy of formation (ΔG_f⁰), an important property needed in design calculations has been estimated using molar refraction, R_M. The linear relationships derived between ΔG_f⁰ and R_M tested with the data on 8 series of hydrocarbons at 228 compounds yielded average deviations comparable to the methods cited in recent literature. The method can be used as an alternative to the existing ones, because of its simplicity combined with reasonable accuracy.     

The effect of hydrogen in the mechanism of aluminum-induced crystallization of sputtered amorphous silicon using scanning Auger microanalysis

The metal-induced crystallization (MIC) of hydrogenated sputtered amorphous silicon (a-Si:H) using aluminum has been investigated using X-ray diffraction (XRD) and scanning Auger microanalysis (SAM). Hydrogenated, as well as non-hydrogenated, amorphous silicon (a-Si) films were sputtered on glass substrates, then capped with a thin layer of Al. Following the depositions, the samples were annealed in the temperature range 200 °C to 400 °C for varying periods of time. Crystallization of the samples was confirmed by XRD. Non-hydrogenated films started to crystallize at 350 °C. On the other hand, crystallization of the samples with the highest hydrogen (H₂) content initiated at 225 °C. Thus, the crystallization temperature is affected by the H₂ content of the a-Si. Material structure following annealing was confirmed by SAM. In this paper, a comprehensive model for MIC of a-Si is developed based on these experimental results.     

Pregnancy by Assisted Reproductive Technology Is Associated with Shorter Telomere Length in Neonates

Telomere length (TL) influences the development of lifestyle-related diseases, and neonatal TL may influence their prevalence. Various factors have been reported to affect neonatal TL. Although the fetus is exposed to multiple conditions in utero, the main factors affecting the shortening of neonatal TL are still not known. In this study, we sought to identify factors that influence fetal TL. A total of 578 mother-newborn pairs were included for TL analysis. TL was measured in genomic DNA extracted from cord blood samples using quantitative PCR. The clinical factors examined at enrollment included the following intrauterine environmental factors: maternal age, assisted reproductive technology (ART) used, body mass index (BMI), gestational diabetes mellitus (GDM), maternal stress, smoking, alcohol consumption, preterm delivery, small-for-gestational-age, neonatal sex, and placental weight. Univariate and multivariate regression analyses were used to verify the relationship between neonatal TL and these clinical factors. The median neonatal TL to single-copy gene ratio was 1.0. Pregnancy with ART was among the 11 factors associated with shorter neonatal TL. From multiple regression analysis, we determined that neonatal TL was significantly shorter for pregnancies in the ART group than in the other groups. We conclude that pregnancy with ART is associated with shorter neonatal TL.     

Microwave assisted synthesis and antimicrobial activity of Fe3O4-doped ZrO2 nanoparticles

Composites play important role in dental filling by controlling shrinkage along with correction in teeth's shape and position. Rehabilitation of severely worn dentition can be achieved using mechanically strong composites. This study aims to synthesize zirconia-based composites to be used as dental fillers. Effect of microwave powers (100–900?W) along with Fe₃O₄ doping are studied on the structural, mechanical and magnetic properties of stabilized zirconia. SEM and TEM reveal formation of spherical nanoparticles with diameter of ～30?nm. XRD results shows phase pure tetragonal zirconia (t-ZrO₂) at microwave power of 500?W without any post heat treatment. Crystallite size calculated from XRD data (～23?nm) matches well with the previously reported value for stabilization of t-ZrO₂. Microwave energy dissipation results in stresses causing volume shrinkage leading to monoclinic to tetragonal phase transformation with higher X-ray density and hardness of ～1347HV. VSM results show ferromagnetic response with low coercivity (600Oe) value and saturation magnetization (～2emu/g). It is worth mentioning here that this is one of its kind study reporting synthesis of room temperature stabilized Fe₃O₄ doped zirconia composites at microwave power of 500?W. Antibacterial studies reveal inhibition zone of ～32?mm against bacillus bacteria suggesting their potential use as dental filler.     

Biogas production enhancement by soya sludge amendment in cattle dung digesters

Biogas energy production from cattle dung is an economically feasible and eco-friendly in nature. But dependence only on cattle dung is a limiting factor. Rich nitrogen containing substrate addition to extra carbohydrate digester like cattle dung could improve the biogas production. Detailed performance of the digesters at different ratios of cattle dung and soya sludge has been discussed in this paper considering the cold countries climate. Soya sludge substrate not only has high nitrogen content of 4.0–4.8% but it also has high percentage of volatile solids content in the range of 97.8–98.8%. Soya sludge addition also improved the manurial value of the digested slurry and also improved the dewater-ability of the sludge. Results indicated an increment of 27.0% gas production at 25.0% amendment of soya sludge in non-homogenized cattle dung (NCD) digester. The amount of gas production increased to 46.4% in case of homogenized cattle dung (HCD) with respect to NCD feed at the same amendment.     

IP address allocation protocols in vehicular ad hoc networks

In vehicular ad hoc networks (VANETs), communication takes place between vehicles to vehicles, the vehicles to the road side units, and vice-versa. The basic purpose of these communications is to share and exchange tremendous amount of data and information. For efficient information sharing, a systematic and structured connection establishment algorithm is needed. In VANETs, each connected node of the network need to be assigned a unique address. Hence, an algorithm is needed for the proper assignment of unique address to all nodes in the network. This paper explains different types of IP address protocols in VANETs. We have also explained advantage and disadvantage of existing IP address allocation protocols in VANETs.     

Efficient conversion of light paraffinic naphtha to aromatics over metal-modified Mo/MFI catalysts

Journal of Porous Materials - The transformation of light naphtha to value-added aromatic compounds is gaining momentum in the petrochemical industry. In this work, a series of metal modified...     

Evaporated Thin Films of CdS and CdTe: Optimization for Photovoltaic Applications

Thin films of cadmium sulphide and cadmium telluride have been prepared by thermal evaporation under various conditions of deposition. These films have been characterized optically. electrically and for structure determination. The results of these characterizations along with the initial results of all thin film CdS/CdTe solar cells are presented in this paper