Efficient electron transport in 4,4′-bis[N-(1-napthyl)-N-phenyl-amino] biphenyl and the applications in white organic light emitting devices

The electron transport capability of 4,4′-bis[N-(1-napthyl)-N-phenyl-amino] biphenyl (α-NPD) was investigated by fundamental physical measurements named as current–voltage (I–V) electrical property evaluation and displacement current measurement (DCM). In electron-dominated devices, the I–V characteristics of α-NPD were similar as that of (8-hydroxyquinolino) aluminum (Alq₃) owing to their same order of electron mobilities. The interface of Al/LiF and α-NPD was proven to be an Ohmic contact through the evaluation of I–V characteristics at low bias regime (<3 V). And an electron injection barrier, 0.21 eV, at Al/LiF/α-NPD was obtained by extrapolating the temperature dependent I–V curves. The electron transport behavior in α-NPD film was further confirmed by DCM evaluations. Furthermore, an efficient white organic light emission device was successfully fabricated by using α-NPD as hole transport layer and electron transport layer, respectively.     

A promising application for broadband ISDN: Hypermedia teleconference

The optimum BISDN teleconference service for business, called hypermedia teleconference, is designed based on research into typical business activities and ATM, the most promising BISDN architecture. Service characteristics are determined by analysing the daily work practices of a large set of businessmen. It is shown that communication tasks occupy 44 per cent of the working day. The analysis further shows that some 60 per cent of all communication tasks could be performed through an advanced digital teleconference service. Hypermedia teleconference is designed to satisfy the needs of business through personal communication terminals and ATM public networks. The terminals effectively allocate the BISDN's high-speed transmission capability between a number of subchannels that realize distributed multipoint connection links and multimedia paths. The terminals use a new variable-bit-rate ATM codec created to realize high quality video. Users can easily create full featured teleconferences without a centralized connection facility. Terminals allow the synergistic combination of video, voice, telewriting, telepointing and document transmission services.     

Dual-Mode Space-Temporal Simultaneous Processing Equalizer

A tapped delayed line adaptive array antenna (TDL-AAA) and a space-temporal simultaneous processing equalizer (ST-SPE) are proposed as simple space-temporal equalizers based on minimum mean square error (MMSE) criterion. The ST-SPE has a compact hardware with a small number of taps compared to that of the TDL-AAA. The ST-SPE can reduce the computational complexity of the space-temporal joint equalization and it works effectively under the minimum phase condition such as appeared at line-of-sight (LOS) propagation environments at a high antenna height base station. However the ST-SPE cannot work under a non-minimum phase condition caused under N-LOS (non-line-of-sight). On the other hand, the TDL-AAA whose reference signal is synchronized at the center tap (TDL-AAA_C) can work even in the non-minimum phase condition. In this paper, we propose a dual-mode space-temporal simultaneous processing equalizer (Dual-mode ST-SPE) which has a simple configuration and also works in non-minimum phase condition. The Dual-mode ST-SPE can reduce the computational complexity compared to the TDL-AAA_C. Yoshihiro Ichikawa received the B.E. degree in department of communication engineering, in National Defense Academy in 1995, and M.E. and D.E. degree from Ibaraki University in 2001 and 2004, respectively. He joined the Japan Air Self Defense Force in 1995. His research interests are an adaptive algorithm, an antenna design, and an adaptive array antenna. Shigeki Obote received his B.E., M.E. and D.E. degrees in electrical and electronic engineering from Tottori University, Tottori, Japan, in 1996, 1998 and 2000, respectively. Since 2000, he has been with department of media and telecommunications engineering, faculty of engineering, Ibaraki University, Ibaraki, Japan, where he is currently a associate professor. His research interests are in adaptive array antenna and wireless communications systems. Kenichi Kagoshima received the B.E., M.E. and D.E. degrees in electronics engineering from the Tokyo Institute of Technology, Tokyo, Japan, in 1969, 1971, and 1974, respectively. He joined the Nippon Telegraph and Telephone Corporation (NTT) Laboratory in 1974 and researched and developed many kinds of radio communication antennas. Since 1997, he has been a professor at Ibaraki University, Ibaraki, Japan. Dr. Kagoshima was a Secretary and Treasure, Vice Chairman, and Chairman of the IEEE AP-S Tokyo Chapter in 1992, 1993, and 1994, respectively. He was a chair of antennas and propagation professional group of IEICE in 1999 and 2000. In 1973, he received the Yonezawa Prize for Young Engineers and 1998, best paper award from IEICE, respectively.     

Development of a simple capillary electrophoretic determination of glucosamine in nutritional supplements using in-capillary derivatisation with o-phthalaldehyde

A simple capillary electrophoretic method was developed for the determination of glucosamine using in-capillary derivatisation. Glucosamine in commercial products was extracted with purified water. The CE separation was achieved on an uncoated fused-silica capillary using a 20 mM borate buffer (pH 9.2) containing 5 mM o-phthalaldehyde (OPA) and 5 mM 3-mercaptopropionic acid (MPA) at 25 kV, followed by UV detection at 340 nm. The detector response was linear (r² > 0.999) in the concentration range 10–1000 μg/mL. The limit of detection (LOD) was 1.3 mg/g. Spiked glucosamine recoveries at 50 and 100 mg/g level were 95.1% and 104.3%, respectively. The method was applied to 16 commercial products. The concentrations of glucosamine were 109–705 mg/g, and the ratios of detected glucosamine content to the labelled value were 88.8–124%. No significant bias was observed (r² = 0.989, p < 0.01), between results obtained by the proposed CE method and an official colorimetric method (Japanese Health Food & Nutrition Food Association).     

Distribution and elimination of polychlorinated dibenzo-p-dioxins,dibenzofurans, biphenyls,and p,p'-DDE in tissues of bald eagles from the Upper Peninsula of Michigan

Liver, muscle, fat, kidney, and gall bladder of eight bald eagles (Haliaeetus leucocephalus) found dead in the Upper Peninsula of Michigan during 2000 were analyzed for the presence of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and biphenyls (including coplanar PCBs), p,p'-DDE, and hexachlorobenzene (HCB). Necropsy results showed that the birds suffered from peritonitis, bacterial infection, or trauma. Concentrations of PCDD/DFs in livers ranged from 23 to 4500 pg/g on a wet weight basis (wet wt), whereas the least concentrations were found in blood plasma of bald eagle nestlings (2.3-49 pg/g, wet wt). A maximum total PCB concentration of 280,000 ng/g, wet wt, was found in the liver of a dead bald eagle affected by peritonitis. The greatest concentrations of p,p'-DDE and HCB in eagle livers were 17,000 and 120 ng/g, wet wt, respectively. Eagles with elevated 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) or total PCB concentrations tended to have great TCDD/TCDF or PCB126/PCB77 ratios, hypothesized to be due to induction of cytochrome P450 enzymes and subsequent metabolism of TCDF and PCB77. Concentrations of TCDD toxic equivalents (TEQs) in the tissues of bald eagles exceeded the thresholds for toxicity in a few avian species. Non-ortho coplanar PCBs accounted for 68-88% of the total TEQs in bald eagle tissues. PCDDs and PCDFs collectively accounted for, on average, 17% of the total TEQs. On the basis of the analysis of a single gall bladder with bile, biliary excretion rates of PCDDs, PCDFs, and PCBs were estimated as 0.015-0.02% per day.     

Quantitative source identification of dioxin-like PCBs in Yokohama, Japan, by temperature dependence of their atmospheric concentrations

The source and environmental behavior of dioxin-like polychlorinated biphenyls (PCBs) together with other PCBs and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDDs/PCDFs) were evaluated based on analysis of variations in their atmospheric concentrations in Yokohama, Japan. Potential factors responsible for variations in the atmospheric concentrations of the congeners were investigated by principal component analysis and multiple regression analysis of the data. Two major variations were seen: one had strong temperature dependence, while the other had no significant temperature dependence. A possible explanation for this difference is that the former is related to congeners released by volatilization (e.g., volatilization from commercial PCB products and past polluted environments), while the latter is related to congeners emitted from thermal processes. The relative contributions of dioxin-like PCBs released by volatilization and those emitted from thermal processes were estimated based on the temperature dependence of the atmospheric concentrations. The results suggest that both dioxin-like PCBs emitted from thermal processes and those released by volatilization are significant sources of air pollution in this area in terms of the toxic equivalent (TEQ) for dioxin-like PCBs. We demonstrated that the present approach based on variations in atmospheric concentrations can be useful in providing a qualitative as well as quantitative understanding of source information.     

Docosahexaenoic Acid Esters of Hydroxy Fatty Acid Is a Novel Activator of NRF2

Fatty acid esters of hydroxy fatty acids (FAHFAs) are a new class of endogenous lipids with interesting physiological functions in mammals. Despite their structural diversity and links with nuclear factor erythroid 2-related factor 2 (NRF2) biosynthesis, FAHFAs are less explored as NRF2 activators. Herein, we examined for the first time the synthetic docosahexaenoic acid esters of 12-hydroxy stearic acid (12-DHAHSA) or oleic acid (12-DHAHOA) against NRF2 activation in cultured human hepatoma-derived cells (C3A). The effect of DHA-derived FAHFAs on lipid metabolism was explored by the nontargeted lipidomic analysis using liquid chromatography-mass spectrometry. Furthermore, their action on lipid droplet (LD) oxidation was investigated by the fluorescence imaging technique. The DHA-derived FAHFAs showed less cytotoxicity compared to their native fatty acids and activated the NRF2 in a dose-dependent pattern. Treatment of 12-DHAHOA with C3A cells upregulated the cellular triacylglycerol levels by 17-fold compared to the untreated group. Fluorescence imaging analysis also revealed the suppression of the degree of LDs oxidation upon treatment with 12-DHAHSA. Overall, these results suggest that DHA-derived FAHFAs as novel and potent activators of NRF2 with plausible antioxidant function.     

Chemospecific ring-opening polymerization of α-methylenemacrolides

α-Methylenemacrolides having various groups, such as aromatic, ether, and amine, were enzymatically, anionically, and radically polymerized. The polymerization with the lipase catalyst successfully afforded polymers only through the ring-opening process, whereas the vinyl polymerizations selectively proceeded by using anionic and radical initiators. The polyesters obtained by the enzymatic polymerization have a polymerizable methacrylic methylene group in the main-chain, in addition to the aromatic and polar groups, and were further radically polymerized to quantitatively produce a cross-linked polymer gel.     

Diffusion process of amino acids in polymer supports for solid‐phase peptide synthesis as studied by pulsed‐field‐gradient spin‐echo proton nuclear magnetic resonance

The diffusion coefficient (D) values of tert‐butyloxycarbonyl‐glycine, tert‐butyloxycarbonyl‐L ‐tryptophan, tert‐butyloxycarbonyl‐L ‐phenylalanine (Boc‐Phe), and 9‐fluorenylmethoxycarbonyl‐L ‐phenylalanine in Merrifield polystyrene (MPS) gels, poly(ethylene glycol)‐grafted polystyrene (PEG–PS) gels, and crosslinked ethoxylate acrylate (CLEAR) gels, as used in solid‐phase peptide synthesis, were determined by the pulsed‐field‐gradient spin‐echo ¹H‐NMR method. From these experimental results, it was found that the amino acids in MPS gels, PEG–PS gels, and CLEAR gels with N,N‐dimethylformamide‐d₇ (DMF‐d₇) as a solvent had multidiffusion components within a measurement timescale of 10 ms. The D value of Boc‐Phe in polystyrene gels (1% divinylbenzene crosslinked) with tetrahydrofuran‐d₈ was much larger than that in the same gels with DMF‐d₇. Furthermore, the required time in which an amino acid transferred from a reactive site to a reactive site was estimated, within which the solvents and amino acids in the polymer supports diffused in the swollen beads.© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 413–421, 2003     

Residual stress versus microstructural effects on the strength and toughness of phase-separated PbO–B2O3–Al2O3 glasses

A few authors have reasonably proposed that liquid–liquid phase-separated (LLPS) glasses could show improved fracture strength, S_f, and toughness, K_Ic, as the second phase could provide a barrier to crack propagation via deflection, bowing, trapping, or bridging. Due to the associated tensile or compressive residual stresses, the second phase could also act as a toughening or a weakening mechanism. In this work, we investigated five glasses of the PbO–B₂O₃–Al₂O₃ system spanning across the miscibility gap: Four of them undergo LLPS—three are binodal (two B₂O₃-rich and one PbO-rich) and one is spinodal—and one does not show LLPS (composition outside the miscibility gap). Their compositions were designed in such a way that the amorphous particles are under compressive residual stresses in some and under tensile residual stresses in others. The following mechanical properties were determined: the Vickers hardness, ball on three balls (B3B) strength, and toughness, K_Ic-SEVNB (single-edge V-notch beam [SEVNB]). The microstructures and compositions were analyzed using scanning electron microscopy with energy-dispersive X-ray spectrometry. The spinodal glass showed, by far, the best mechanical properties. Its K_Ic-SEVNB = 1.6 ± 0.1 MPa m^1/2, which embodies an increase of almost 50% over the B₂O₃-rich binodal composition, and 90% considering the PbO-rich binodal composition. Moreover, its fracture strength, S_f = 166 ± 7 MPa, is one of the highest ones ever reported for an LLPS glass. Fracture analyses evidenced that the spinodal composition exhibited the lowest net stress at the fracture point. Moreover, calculations indicate that the internal residual stress level is the lowest in the spinodal glass. The overall results indicate that the microstructural effect of the spinodal glass is the most significant factor for its superior mechanical properties. This work corroborates the idea that LLPS provides a feasible and stimulating solution to improve the mechanical properties of glasses.