10 Gbit/s optical soliton transmission over 7200 km by using amonolithically integrated MQW-DFB-LD/MQW-EA modulator light source

The authors demonstrate 10 Gbit/s optical soliton transmission in a recirculating loop through the use of a monolithically integrated MQW-DFB-LD/MQW-EA modulator light source. The timing jitter due to the Gordon-Haus effect is successfully reduced by the optical bandpass filters conventionally used in the cascaded EDFAs to avoid the accumulation of amplified spontaneous emission. The transmission distance of 7200 km is achieved at a bit error rate of 10^-9     

Cooling condition dependence on ion etching rate in a softmagnetic metallic glass

Taking into consideration the knock-on cascade mechanism and the free volume theory, the cooling condition dependentR _s (ion etching rate) is investigated for a liquid-quenched Fe-10at%Si-15at%B alloy glass. A highR _s is found in a slow cooled glass.     

Latest advances in camcorder technology

Camcorders have been developed to be compact with high performance. Latest advancement of key technologies and devices such as digital signal processing LSI, six-layer printed circuit board with micro chips, high-speed power lens with linear motor, 103 K pixels 0.7-in LCD electronic viewfinder, and high-energy Li-ion battery are described. High-band format is also explained     

Decomposition of timed automata for solving scheduling problems

A decomposition algorithm for scheduling problems based on timed automata (TA) model is proposed. The problem is represented as an optimal state transition problem for TA. The model comprises of the parallel composition of submodels such as jobs and resources. The procedure of the proposed methodology can be divided into two steps. The first step is to decompose the TA model into several submodels by using decomposable condition. The second step is to combine individual solution of subproblems for the decomposed submodels by the penalty function method. A feasible solution for the entire model is derived through the iterated computation of solving the subproblem for each submodel. The proposed methodology is applied to solve flowshop and jobshop scheduling problems. Computational experiments demonstrate the effectiveness of the proposed algorithm compared with a conventional TA scheduling algorithm without decomposition.     

Heavy oil sorption and recovery by using carbon fiber felts

On fibrous carbon materials, including activated carbon fibers, sorption capacity for heavy oils, less viscous A-grade and more viscous C-grade, was determined. Sorption capacity depended strongly on their bulk density; the correlation was the same as that found previously on exfoliated graphite and carbonized fir fibers. On carbon fiber felts, excellent recycling performance was observed, though sorption capacity was not so high as on exfoliated graphite and carbonized fir fibers. By filtration under suction, about 90% of sorbed A-grade heavy oil could be recovered and no decrease in sorption capacity was detected even after eight cycles. By washing with solvents, n-hexane for A- and C-grade oils and A-grade oil for C-grade oil, almost 100% recovery with no marked reduction in sorption capacity was found for each cycle. For the felts of PAN-based carbon fibers, rather severe operations for oil recovery, centrifugation and squeezing with twisting, could be applied without pronounced decreases in sorption capacity and recovery ratio.     

Fabrication of sub-micron structures for MEMS using deep X-ray lithography

Fabrication techniques of microstructures with high resolution and high aspect ratio are necessary for practical microelectromechanical systems (MEMS) that have high performance and integration. In order to fabricate microstructures with sub-micron resolution and high aspect ratio, deep X-ray lithography has been investigated using the compact synchrotron radiation (SR) light source called “AURORA”. An X-ray mask for sub-micron deep X-ray lithography, which is composed of 1 μm thick Au as absorbers, 2 μm thick SiC as a membrane and 625 μm thick Si as a frame, was designed. In preliminary experiments, the following results were achieved: EB resist microstructures with an aspect ratio of 22 corresponding with 0.07 μm width and 1.3 μm height were formed; a 10 μm thick PMMA resist containing no warp was formed by direct polymerization, enabling more precise gap control.     

Nonlinear adaptive control system design and experiment for a 3-DOF model helicopter

This paper deals with model following control of a model helicopter with three degree-of-freedom. Since the decoupling matrix is singular, a nonlinear structure algorithm is used to design the controller. Furthermore, since the model dynamics are described linearly by unknown system parameters, a well-known parameter estimation technique is introduced. The integral type of estimation model is proposed here since the use of the derivative type of model cannot obtain the desired estimation result. The experimental results show the effectiveness of the proposed method. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008