Microstructural and electrical properties of varistors prepared from coated ZnO nanopowders

This paper describes a solution-based technique for fabrication of varistor grade composite nanopowders. The method consists of coating major varistor dopants on the surface of the ZnO nanoparticles. As a result, a homogenous mixture of dopants and ZnO nanoparticles will be achieved. TEM results indicated that a composite layer of dopants with the average particle size of 9 nm on the surface of ZnO nanoparticles has been successfully prepared. Sintering of the coated powders was performed in temperatures as low as 850 °C and final specimens with average particle size of 900 nm and density of 98.5% were achieved. In comparison to conventional mixing, varistors prepared from coated nanopowders exhibited superior electrical properties and microstructure homogeneity. The improvement of electrical properties can be attributed to small grain size, homogenous distribution of dopants and elimination of large Bi-Pockets. In addition, the processing route of schottky barrier formation is quite different from what is generally considered as the method of barrier formation in ZnO grain boundaries.     

A review of application of amine-terminated dendritic materials in textile engineering

Over the last decade, dendritic structures including hyperbranched polymers, dendrigrafts, dendrons, and dendrimers due to their distinct structural design such as highly branched structure and a large number of reactive end groups have received considerable attention. Among various kind of dendrimer, particularly amine-terminated dendritic materials like polyamidoamine (PAMAM), polypropylene imine (PPI), and polyethylene imine (PEI) have been introduced as the potential candidates in a wide range of areas, particularly in the field of textiles engineering. Hence, this review provides an introduction of amine-terminated dendritic polymers and new potential applications of them in textiles engineering such as improvement of dyeability, salt-free dyeability, antimicrobial activity, long-lasting fragrant fabric, anti-ultraviolet property, drug delivery through fabric, flame retardancy, and wastewater treatment. Regarding the complex synthesis of dendrimers which makes them expensive products, application of amine-terminated hyperbranched polymers provides affordable dendritic polymers to create novel features.     

Fault Tolerance and Energy Efficient Clustering Algorithm in Wireless Sensor Networks: FTEC

Wireless Personal Communications - The beacon order and Superframe order parameter values, as defined by the IEEE 802.15.4 standard specification, constrain the number of data packets that can be...     

The control of abnormal grain growth in low-voltage SnO2 varistors by microseed addition

In this research, the addition effects of three different quantities of micron-sized seeds (microseeds) to a SnO₂ varistor prepared from nanomaterials on the microstructure and electrical properties were studied. Moreover, surge-withstanding capability of low-voltage SnO₂ varistors was investigated. The X-ray diffraction pattern disclosed a single phase SnO₂ for microseed grains. The morphological features of samples were characterized using scanning electron microscopy. The abnormal distribution of grain size with elongated grains of SnO₂ in fine grains matrix was observed in sintered samples without microseeds. The low content of microseed addition (0.3 wt%) had not controlled abnormal grain growth, however, it increased mean grain size to 37 µm. Although the high content of microseeds (7.5 wt%) stopped abnormal grain growth, it had a negative effect on relative density and mean grain size. The normal grain size distribution with maximum mean grain size (45 µm) was obtained in samples containing 1.5 wt% microseeds. These samples showed the lowest breakdown field (240 V/cm) and the highest surge-withstanding capability (1.5 kA/cm²). Furthermore, the standard deviation of the electrical parameters of these samples was improved due to normal grain-size distribution.     

Schiff base complex of Cu immobilized on MCM-41 as reusable catalyst for efficient oxidative coupling of thiols and oxidation of sulfides using hydrogen peroxide

Schiff base complex of copper-functionalized MCM-41 (Cu-complex@MCM-41) was synthesized and used as an efficient and novel heterogeneous catalyst for the oxidative coupling of thiols into corresponding disulfides and oxidation of sulfides to sulfoxides using hydrogen peroxide (H₂O₂) as the oxidant. An aliphatic and aromatic series of sulfides and thiols including various functional groups were successfully converted into corresponding products. The all products were obtained in good to excellent yields. The mesoporous catalyst is characterized by FT-IR spectroscopy, BET, XRD, SEM, EDS and TGA. Recovery of the catalyst is easily achieved by simple filtration and reused for several consecutive runs without significant loss of its catalytic efficiency.     

Effect of Aqueous Film‐Forming Foams on the Evaporation Rate of Hydrocarbon Fuels

A class of firefighting foams, known as aqueous film‐forming foam (AFFF), has the ability to form a film by spreading on the free surface of some hydrocarbon fuels. To find out whether this film could reduce the evaporation losses of volatile hydrocarbons, the evaporation rates of fuels covered with a film of AFFF were measured by weighing the fuel at different time intervals. The results proved that the addition of aqueous surfactant solutions on the fuels is not always synonymous to the reduction of evaporation rates, but sometimes it might also cause an increase. However, it was found that polyethylene glycol could modify AFFF in a way that it can form a protective permanent film on the surface of a fuel such as kerosene, thereby leading to a reduction of evaporation losses.     

Dendrigraft with citric acid on acrylonitrile/acrylic acid copolymer electrospun fibres

Acrylonitrile/acrylic acid copolymers were synthesized with different mole fractions (1, 2, 5 and 10 mol%) of acrylic acid (AA) in the feed by aqueous suspension polymerization, and bead‐free fibres (295–375 nm in diameter) were made from the copolymers in dimethylformamide solutions by electrospinning. In a heterogeneous system containing electrospun fibre mats, dendritic molecules were grown by reaction between carboxylic acid of AA and –OH groups of citric acid activated by dicyclohexylcarbodiimide. The products were analysed using ¹H NMR, ¹³C NMR and Fourier transform infrared spectroscopies, density determination, scanning electron microscopy, optical microscopy, differential scanning calorimetry and pH response properties. With decreasing AA content, the isotacticity of the copolymers decreases with a more random distribution of the co‐monomers which leads to higher percentage conversions of dendrigraft due to reduced steric hindrance. On the formation of dendrigraft, the percentage conversion of the reactions decreases with an increase of generation number and AA content. A reduction of density for the first generation and then an increase with increasing generation are observed. During oxidation stabilization of fibres with a decrease of AA content and an increase in generation number, the amount of liberated heat increases. Fibres containing more carboxylic groups show significantly greater amounts of swelling/de‐swelling in basic and acidic media, respectively. To be used as nanocarbon fibre precursors, or as active particles for loading with guest molecules, or as pH actuators, the first generation of dendrigrafted fibres are expected to have the greatest potential among the various samples examined. © 2013 Society of Chemical Industry     

Determination of scale elasticity in the existence of non-discretionary factors in performance analysis

Discretionary models of data envelopment analysis (DEA) assume that all inputs and outputs can be varied at the discretion of management or other users. In any realistic situation, however, there may exist “exogenously fixed” or non-discretionary factors that are beyond the control of a DMU’s management, which also need to be considered. In this paper, Banker’s definition of scale elasticity and returns to scale is modified so that it includes the non-discretionary factors, as well. Then, an efficient algorithm which is capable of determining scale elasticity in the existence of non-discretionary factors is provided.     

Modification of electrospun poly(L-lactic acid)/polyethylenimine nanofibrous scaffolds for biomedical application

In this study, modification of poly(L-lactic acid) (PLLA) electrospun nanofibrous scaffolds blending with polyethylenimine (PEI) in different blend ratios was performed. The sample with 85:15 blend ratio revealed most promising results, and was selected for further modification with gelatin. It was found that the presence of PEI could enhanced porosity, mechanical properties, surface/bulk hydrophilicity and also gelatin grafting density about five times with positive effect on cell behavior. The results indicated that the limitations of PLLA electrospun nanofibers for potential application as a functional tissue engineering scaffold (i.e., poor cell adhesion and necrosis of host tissues as a result of providing acidic environment while degradation) could be overcome through blending with PEI and grafting with gelatin.     

Organic Additives for the Enhancement of Laminar Flow in a Brain‐Vessels‐Like Microchannel Assembly

Organic polymers were extracted from okra, aloe vera, and hibiscus leaves and used as drag‐reducing additives (DRAs) to enhance the laminar flow in custom‐made microchannels that simulate the human brain vessels. The experiment was conducted using an open‐loop microfluidic system. The flow enhancement performance was evaluated as the function of percentage of flow increment of mucilage additives at different concentrations. Okra mucilage showed greater flow enhancement performance at higher mucilage concentration while both aloe vera and hibiscus mucilage performed better at lower additive concentration. The findings prove the potential of these organic polymers as DRAs to enhance the blood flow.