A new erasing and row decoding scheme for low supply voltageoperation 16-Mb/64-Mb flash memories

To improve the performance of high-density flash memories, several circuit technologies have been developed. A word-line boost and clamp scheme realizes low supply voltage read operations. A flash programming scheme utilizing Fowler-Nordheim (F-N) tunneling for programming before erasure and a negative gate biased erasing scheme accomplish low-power, high-speed, and 5-V-only erase operations. The chip size penalty is estimated to be only 3% for the 16-Mb flash memories     

Source-to-drain nonuniformly doped channel (NUDC) MOSFET structuresfor high current drivability and threshold voltage controllability

The source-to-drain nonuniformly doped channel (NUDC) MOSFET has been investigated to improve the aggravation of the V_th lowering characteristics and to prevent the degradation of the current drivability. The basic concept is to change the impurity ions to control the threshold voltage, which are doped uniformly along the channel in the conventional channel MOSFET, to a nonuniform profile of concentration. The MOSFET was fabricated by using the oblique rotating ion implantation technique. As a result, the V_th lowering at 0.4-μm gate length of the NUDC MOSFET is drastically suppressed both in the linear region and in the saturation region as compared with that of the conventional channel MOSFET. Also, the maximum carrier mobility at 0.4-μm gate length is improved by about 20.0%. Furthermore, the drain current is increased by about 20.0% at 0.4-μm gate length     

Photoinduced Magnetization with a High Curie Temperature and a Large Coercive Field in a Co‐W Bimetallic Assembly

The crystal structure, magnetic properties, and temperature‐ and photoinduced phase transition of [{Co^II(4‐methylpyridine)(pyrimidine)}₂{Co^II(H₂O)₂}{W^V(CN)₈}₂]·4H₂O are described. In this compound, a temperature‐induced phase transition from the Co^II (S = 3/2)‐NC‐W^V(S = 1/2) [high‐temperature (HT)] phase to the Co^III(S = 0)‐NC‐W^IV(S = 0) [low temperature (LT)] phase is observed due to a charge‐transfer‐induced spin transition. When the LT phase is irradiated with 785 nm light, ferromagnetism with a high Curie temperature (T_C) of 48 K and a gigantic magnetic coercive field (H_c) of 27 000 Oe are observed. These T_C and H_c values are the highest in photoinduced magnetization systems. The LT phase is optically converted to the photoinduced phase, which has a similar valence state as the HT phase due to the optically induced charge‐transfer‐induced spin transition.     

High-throughput immunophenotyping by surface plasmon resonance imaging

Cell binding assays on antibody arrays permit the rapid immunophenotyping of living cells. The throughput of the analysis, however, is still limited due to our inability to perform parallel and quantitative detection of cells captured on the array. To address this limitation, we employed here an imaging technique based on surface plasmon resonance (SPR). SPR has been frequently used to monitor capture of proteins on antibody microarrays, while few cases were reported for capture of cells. Antibody arrays were prepared through the photopatterning of an alkanethiol monolayer on a gold-evaporated glass plate and the subsequent immobilization of various antibodies onto 4-9 separate spots created by photopatterning. A glass slip was mounted onto the array with a thin spacer to construct a parallel-plate chamber. Leukemia cells were injected into the chamber to conduct a binding assay, while refractive index changes at the vicinity of the array surface were monitored by SPR imaging. We observed that SPR signals were intensified on specific antibody spots but not on nonspecific spots. Confocal laser scanning microscopy revealed that the observed SPR signals were attributed to cell deformations caused by multivalent interactions with immobilized antibody, which effectively elevated the refractive index of a medium phase within an evanescent field. This effect could be suitably utilized to monitor quantitatively cell binding to multiple spots from a heterogeneous cell population.     

Effect of microstructures on dielectric breakdown strength of sintered reaction-bonded silicon nitride ceramics

Silicon nitride (Si₃N₄) was prepared from silicon by a sintered reaction-bonded silicon nitride method using yttria and magnesia as sintering additives. Post-sintering (PS) of nitrided compacts was carried out at 1850°C under a nitrogen pressure of 1 MPa. Effect of PS time on microstructure and dielectric breakdown strength (DBS) of the prepared Si₃N₄ ceramics was evaluated. The DBS was measured using specimens with four different thicknesses (0.30, 0.20, 0.10, and 0.05 mm) in order to examine the thickness dependence. The porosity of the sintered Si₃N₄ decreased by prolonging the PS time, and the full density could be achieved at the PS time of over 6 h. After full densification, rod-like β-Si₃N₄ grains grew up, and their maximum grain size increased from 45.1 to 154.7 μm by prolonging the PS time from 6 to 48 h. The DBS of the thick Si₃N₄ substrates (0.30 mm) showed little variation from 35.4 to 47.0 kV/mm, regardless of the PS time. On the other hand, that of the thin ones (0.05 mm) dramatically decreased from 99.5 to 9.8 kV/mm with increased the PS time from 6 to 48 h. Because the DBS sharply decreased at the thin substrate sintered for longer time in which some large-elongated grains might span the substrate thickness-wise throughout, it was inferred that the interface between β-Si₃N₄ grains and grain boundary phase/intergranular glassy films might be a path of the dielectric breakdown.     

Ciliary neurotrophic factor increases the survival of magnocellular vasopressin and oxytocin neurons in rat supraoptic nucleus in organotypic cultures.

Organotypic cultures of the rat hypothalamus are very useful models for the long-term study of parvocellular vasopressin (VP) neurons in the paraventricular (PVN) and suprachiasmatic (SCN) nuclei. However, they do not preserve significant numbers of VP magnocellular neurons (VP-MCNs) in either the PVN or the supraoptic nucleus (SON). Vutskits et al. [(1998) Neuroscience 87:571-582] reported that ciliary neurotrophic factor (CNTF) was a selective survival factor for rat VP-MCNs in organotypic cultures of the rat hypothalamic paraventricular nucleus (PVN). We examined the effects of CNTF on the survival of these neurons in rat and mouse SONs. CNTF (10 ng/ml) in the culture media increased the survival of VP-MCNs by 6-fold and OT-MCNs by 3-fold. In the mouse, both OT- and VP-MCNs survive very well in organotypic cultures under standard culture conditions and the addition of CNTF had no further effect. Consistent with these results, in situ hybridization showed substantially higher levels of VP- and OT-mRNA in rat PVNs and SONs in the presence of CNTF, but produced no changes in these nuclei in the mouse. The optimum period for the survival effect of CNTF on MCNs in the rat hypothalamic cultures was in the first 7-10 days of culture and this effect is maintained for at least 5 additional days if CNTF is then removed from the medium. Therefore, using CNTF in the culture media can provide an opportunity for long-term studies of rat VP- and OT-MCNs in SONs in organotypic cultures.     

Streptomyces aminopeptidase P: biochemical characterization and insight into the roles of its N-terminal domain

We purified and characterized the aminopeptidase P from Streptomyces costaricanus TH-4 (thAPP). This enzyme has a tetramer structure, a metal-ion preference toward Zn, broad substrate specificity and a narrow pH dependency for activity. The primary structure of thAPP, respectively, exhibits 91% and 65% identity with those of two other APPs-APP I and APP II-from Streptomyces lividans (slAPP I and slAPP II). We next overexpressed the genes encoding thAPP and slAPP II in Escherichia coli and characterized them. Two differences were apparent in their properties: slAPP II formed a dimer, whereas thAPP formed a tetramer; also, the alkaline side pKa for the catalytic action of slAPP II is higher than that of thAPP. Investigation using chimeras of both enzymes revealed that the N-terminal domain is associated with the determination of pKa values for catalytic action and quaternary structure.     

Effect of heparin on high glucose induced proliferation and expression of matrix metalloproteinases in normal human mesangial cells

Background The pathogenesis of diabetic nephropathy (DN) is a complex pathophysiological process. Its precise mechanism is not fully known. In recent years it has been recognized that synthesis of various extracelluar matrix (ECM) components may increase, and that degradation of ECM may decrease in DN. It was reported heparin could inhibit mesangial cells proliferation in vitro. The main aim of this study is to explore whether heparin inhibits proliferation of mesangial cells grown in high glucose concentration and to measure the effect of heparin on matrix metalloproteinases (MMPs) expression in mesangial cells. Methods The medium contained either low glucose (5 mmol/L) or high glucose (25 mmol/L). The concentrations of heparin in the culture medium were 0, 25, 50, 100, 200 or 400 μg/mL. A metabolic (WST-1) assay was used to measure mesangial cell proliferation and Western blot analysis was used to measure MMPs expression of mesangial cells. Results Normal human mesangial cell (NHMC) proliferation was higher in high glucose (HG) medium than in low glucose (LG) medium. They showed a 1.93 fold expansion after 72 h in high glucose in contrast to a 1.63 fold expansion in low glucose. In the presence of heparin, mesangial cells proliferation was inhibited, which was more obvious at high glucose concentrations than at low glucose concentrations. In high glucose, with heparin concentration of 50, 100, 200 and 400 μg/mL, the mesangial cells showed a 0.61 fold, 0.52 fold, 0.52 fold and 0.41 fold reductions in cell number compared to cells grown without heparin. In low glucose, only concentrations of 200 μg/mL and 400 μg/mL showed reduction in cell number, namely 0.54 fold and 0.45 fold, when compared to cells grown without heparin. In Western blot analysis, MMP₁, MMP₂, MMP₃ and MMP₉ was expressed by mesangial cells expressed in both high and low glucose concentrations, which was more prominent in high glucose medium. Incubation of heparin further increased expression of MMP₁, MMP₂, MMP₃ and MMP₉. Conclusions This study suggests that glucose can accelerate mesangial cell proliferation while heparin can reduce proliferation, being more obvious at high glucose concentrations. Higher glucose concentrations led to increased MMP expression, which may take part in the regulation of mesangial matrix synthesis and degradation. Addition of heparin resulted in a corresponding increase in MMP expression, most notably at high glucose concentrations, indicating a potentially renoprotective role in DN. Foundation item: Project (30370663) supported by the National Natural Science Foundation of China     

Online tuning method of stator and rotor resistances in both motoring and regenerating operations for vector‐controlled induction machines

The vector control of induction motors is widely used. This method needs accurate motor parameter but the stator and rotor resistance vary due to motor temperature variation. If the value of resistance in the controller can be set up accurately at first, there must be a difference between the reference and real value of torque because of drift of the resistance. It is necessary to adapt the resistance value. The indirect field‐oriented control of an induction motor requires the value of rotor resistance only, but the direct field‐oriented control method with rotor flux observer requires the value of not only rotor resistance but also stator resistance in the controller. Consequently, it is necessary to adapt both stator resistance and rotor resistance. A parameter adaptation scheme has previously been proposed for the direct field‐oriented control method with rotor flux observer, but this method cannot be used when the motor is in regenerating operation. In this paper, a new stator and rotor resistance adaptation scheme is proposed, which can be applied when the motor is in regenerating operation. The usefulness of the proposed adaptation scheme is confirmed by simulation. © 2001 Scripta Technica, Electr Eng Jpn, 135(1): 56–64, 2001     

Microfluidic motion for a direct investigation of solvent interactions with PDMS microchannels

Solid surface/liquid interactions play an important role in microfluidics and particularly in manipulation of films, drops and bubbles, a basic requirement for a number of lab-on-chip applications. The behavior of solvents in coated microchannels is difficult to be predicted considering theories; therefore, experimental methods able to estimate the properties at the interface in real time and during the operational regime are amenable. Here, we propose to use an experimental setup to evaluate the effective dynamics of solvents inside PDMS microchannels. The influence of the solvent properties as well as of the channel wall’s wettability on the fluid movements was evaluated. Modification of the channel properties was achieved by introducing Teflon coatings that allow producing stable hydrophobic microchannel walls. The results were fitted according to Washburn-type power-law and compared with theoretical calculations of the parameter β that expresses the dependence of capillary dynamics on surface tension γ, liquid viscosity η, contact angles θ and the hydraulic radius R _H. A comparison between the calculated and the experimental values reveled that parameters other than the contemplated ones influenced the measurements. The main parameter that affects the flow of solvents such as water, methanol ethanol, dimethylformamide, acetonitrile and acetone was found to be the γ/η ratio. Considering these results, the investigation tool described here is believed to be promising to predict the dynamics of common organic solvents inside integrated functional fluidic devices and to accurately control solvent flow, particularly in capillary-driven pumpless systems, a basic requirement for widening the application range of PDMS lab-on-chip devices.