Unified modeling technique for high-viscosity,melt-phase,condensation polymer reactors

Mathematical models for chemical reaction and mass transfer occurring in the manufacture of high-viscosity condensation polymers are considered. A preliminary study indicates that several diverse models can be represented using a single formula based upon an effectiveness factor. The effectiveness factor is shown to depend upon a ratio of time scales of mixing and reaction. The formula giving the effectiveness factor in terms of the time scales ratio is shown to depend upon mixing assumptions only. Starting with a mixing-cell model, a new modeling framework is developed and shown to include the previous models as special cases. The framework is free of inherent mixing assumptions and can be applied to a wide variety of situations once the mixing characteristics are specified. © 1993 John Wiley & Sons, Inc.     

Favorable influence of ssDNA-functionalized SWCNT on the navigation pattern of C. elegans

Microsystem Technologies - Single-Walled Carbon Nanotubes (SWCNTs) are widely used as potential carriers in drug delivery systems. The objective of this work was to observe the effects of pristine,...     

Artificial neural network based system identification and model predictive control of a flotation column

The paper describes the design of a neural network based model predictive controller for controlling the interface level in a flotation column. For the system identification, the tailings valve opening is subjected to a pseudo-random ternary signal and response of the interface level is recorded over a period of time. The data so generated is used to develop a dynamic feed forward neural network model. The model uses two past values and one present value of the tailings valve opening as well as interface level as inputs and predicts the future interface level. This model is used for the design of a model predictive controller to control the interface level. The controller was tested both for liquid–gas system as well as liquid–gas–solid system and was found to perform very satisfactorily. The performance of the controller was compared with that of a conventional PI controller for a two-phase system and was found to be better.     

White graphene based composite proton exchange membrane: Improved durability and proton conductivity

Boron nitride, which is also known as “white graphene” may be an attractive filler for composite proton exchange membrane. Application of polymer electrolyte membranes in fuel cell as an electrolyte is gaining attention due to the requirement of clean energy. However, despite its attractive features it requires more consideration for complete commercialization. Herein we demonstrate the preparation of novel functionalized WHITE GRAPHENE (hexagonal boron nitride) and sulfonated poly ether sulfone (SPES) based polymer electrolyte membranes (PEM). Composite membranes have been characterized through thermal, mechanical, structural analysis. Membranes have been subjected to measure methanol permeability and proton conductivity at different temperatures for its use in DMFC. Composite membranes exhibit good physicochemical properties as well as high methanol crossover resistance. 0.5 wt % of FBN (SP-FBN-05) membrane is found to be adequate to get the better performance in DMFC.     

Characterization and optimization of color attributes chroma (C*) and lightness (L*) in offset lithography halftone print on packaging boards

The outcome of a print in production run plays a crucial role in commercial and packaging printing. In the growing packaging industry, colorfulness and saturated prints with high chroma attract the eye of the consumer. The design and layout of a packaging carton comprise of images that consist of halftones in the print process, which demand attractiveness and visibility using bright colors. In this research, an effort has been made to identify and analyze various parameters involved in offset lithography affecting color attributes of prints. This study also focused on the investigation of the best process conditions that would yield optimum color values through multiresponse factors such as chroma and lightness. A general full-factorial Design of Experiments (DOE) approach was used to evaluate the effect of prepress parameters such as screen ruling and dot shape and press parameters such ink viscosity and paper smoothness. These parameters were then optimized using a customized response surface design. From the experiment, it was observed that viscosity of the ink was a significant factor that majorly controls the color attributes. The surface smoothness of the paperboard was one of the factors influencing the improvement of color reproduction. A smoother surface makes even contact during ink transfer in the offset printing machine and hence reflects color with a higher chroma. The optimum parameters were as follows: 15 Pa s ink viscosity, 0.77 μm paper smoothness, and 200 lines per inch (lpi) screen ruling that resulted in increasing chroma (C*) in the middle and shadow tones in the halftones.     

Targets (Metabolic Mediators) of Therapeutic Importance in Pancreatic Ductal Adenocarcinoma

Pancreatic ductal adenocarcinoma (PDAC), an extremely aggressive invasive cancer, is the fourth most common cause of cancer-related death in the United States. The higher mortality in PDAC is often attributed to the inability to detect it until it has reached advanced stages. The major challenge in tackling PDAC is due to its elusive pathology, minimal effectiveness, and resistance to existing therapeutics. The aggressiveness of PDAC is due to the capacity of tumor cells to alter their metabolism, utilize the diverse available fuel sources to adapt and grow in a hypoxic and harsh environment. Therapeutic resistance is due to the presence of thick stroma with poor angiogenesis, thus making drug delivery to tumor cells difficult. Investigating the metabolic mediators and enzymes involved in metabolic reprogramming may lead to the identification of novel therapeutic targets. The metabolic mediators of glucose, glutamine, lipids, nucleotides, amino acids and mitochondrial metabolism have emerged as novel therapeutic targets. Additionally, the role of autophagy, macropinocytosis, lysosomal transport, recycling, amino acid transport, lipid transport, and the role of reactive oxygen species has also been discussed. The role of various pro-inflammatory cytokines and immune cells in the pathogenesis of PDAC and the metabolites involved in the signaling pathways as therapeutic targets have been previously discussed. This review focuses on the therapeutic potential of metabolic mediators in PDAC along with stemness due to metabolic alterations and their therapeutic importance.     

Effect of heating and acidic pH on characteristics of wheat gluten suspension

The effects of different pH treatments with and without heating on the characteristics of wheat gluten suspension was investigated. At pH 1, maximum changes in colour were observed with a concurrent 65% decrease in protein free-thiol content compared to the control gluten. The SDS-Extractability of protein (SDS-EP) chromatogram eluted at lower retention time and the presence of bands at the top lane even during reducing conditions in SDS-PAGE gel suggested complex formation involving bonds other than disulphides. An increase in the free-amino group content and the presence of an additional peak at a higher retention time in the SDS-EP chromatogram was suggestive of hydrolysis. At pH 2 and 3, similar decreases in SDS-EPs and free-thiol content indicated formation of complexes. When heated, the free-thiol content of the dispersions increased compared to the non-heated dispersions indicating disruption of disulphide bonds with changes in gluten structure and size distribution.     

Essential oil nanoemulsions: antibacterial activity in contaminated fruit juices

Many human acid tolerant bacterial and fungal pathogens can be transmitted through the consumption of the contaminated fruit juices. We aim to formulate essential oil nanoemulsions (basil, black seed, turmeric, clove & cinnamon), determine their ability to clear contamination by food borne bacterial pathogens from fruit juices. The antibacterial activity of the optimised formulations was tested in the fruit juices against bacterial pathogens causing gastrointestinal tract infections. The minimum bactericidal concentration (MBC) of clove emulsions ranged from 15.6 to 25 μL mL⁻¹. Cinnamon oil emulsion had an MBC ranging between 15 and 31 μL mL⁻¹. At MBC, cinnamon oil emulsions caused a 6log₁₀ decrease in viable counts by 8 h and maintained the sterility of fruit juices for 7 days at ambient temperature. Thus, clove and cinnamon microemulsions can be used as juice additives to control food borne bacterial pathogens and maintain the bacterial sterility of fruit juices.     

Fusion Multistyle Training for Speaker Identification of Disguised Speech

Wireless Personal Communications - Determining the speaker of a given speech utterance from a group of people is referred to as speaker identification. When voice disguising is done by a person,...     

Microwave-Assisted Synthesis of Fine Particle Oxides Employing Wet Redox Mixtures

Interaction of electromagnetic radiation with a physical mixture of metal nitrates and amides/hydrazides is observed to initiate high-temperature reactions, useful for realizing several high-temperature ceramic materials. A judicious choice of such redox mixtures undergoes exothermic reactions when they couple with microwave radiation. The coupling of electromagnetic radiation with metal salts and amides/hydrazides depends on the dielectric properties of the individual components in the reaction mixture. The approach has been used to prepare γ-Fe₂O₃, Fe₃O₄, MgCr₂O₄, α-CaCr₂O₄, and La_0.7Ba_0.3MnO₃.