Effect of light,food additives and heat on the stability of sorghum 3-deoxyanthocyanins in model beverages

This work aimed to evaluate the stability of sorghum 3-deoxyanthocyanins (DXA) in model beverages (pH 3.5) elaborated with crude sorghum phenolic extract, containing ascorbic acid and sulphite, under fluorescent light exposure and subjected to heat treatment. There was no significant difference in the DXA degradation during storage under light exposure (24.16%) and absence of light (20.72%). DXA degradation did not differ in the presence of ascorbic acid during storage under light exposure (23.99–25.38%) and absence of light (19.87–21.74%). The addition of sulphite caused an initial bleaching reaction, but as a reversible reaction, the anthocyanin content was higher on the last day of storage compared to the first day. There were no significant differences in total anthocyanin content of all treatments subjected to the heat treatment (80 °C for 5 and 25 min). Thus, crude DXA are very stable under light, additives and heat, and may be useful as natural food colourants.     

Liquid chromatographic determination of caffeine and adrenergic stimulants in food supplements sold in Brazilian e-commerce for weight loss and physical fitness

Methyl-xanthines and adrenergic stimulants, such as caffeine and synephrine, are commonly added to food supplements due to their stimulating and thermogenic effects. In addition, the abusive consumption of food supplements with ergogenic and aesthetic purposes has been observed worldwide. This work describes the study of caffeine, p-synephrine, hordenine, octopamine, tyramine, ephedrine and salicin as stimulants in dietary supplements marketed in Brazil for weight loss and physical fitness claims. A total of 94 different products were acquired from 30 Brazilian websites. Thus, the sampling of marketed supplements was performed in virtual commerce (e-commerce) with claims of weight loss, appetite reduction, fat burning and metabolism acceleration. The developed analytical method involved the separation of the stimulants by HPLC with diode array detection (HPLC-DAD) by using a gradient elution of flow rate (0.7–2.5 ml min^?1) and mobile phase composition (0.1% H₃PO₄/methanol). The validated method was applied to the study of 46 dietary supplements. Caffeine, p-synephrine and ephedrine were found to be present as stimulants in 52% of the studied samples marketed as encapsulated or bulk forms. Caffeine was found to be present in concentrations that represent doses from 25.0 to 1476.7 mg day^–1. Synephrine was found in concentrations that represent doses from 59.1 to 127.0 mg day^–1. Ephedrine was found to be associated with caffeine in one formulation at a concentration representing a 26.1 mg day^–1 dosage.     

Preparation and morphological characterization of two- and three-component natural rubber-based latex particles

Different emulsion polymerization processes allowed variation in the microstructure of composite natural rubber (NR)-based latex particles. A prevulcanized and a not-crosslinked natural rubber latex were coated with a shell of crosslinked poly(methyl methacrylate) (PMMA) or polystyrene (PS). The bipolar redox initiating system tert-butyl hydroperoxide/tetraethylene pentamine promoted a core–shell arrangement. Furthermore, PS subinclusions were introduced into the NR core. The initiators used for the subinclusion synthesis were azobisisobutyronitrile at high temperature and a redox initiation system consisting of tert-butyl hydroperoxide/dimethylaniline at low temperature. The morphology of the resulting latex interpenetrating networks (IPN) was characterized by transmission electron micros-copy (TEM) and scanning electron microscopy (SEM). Different staining methods allowed us to increase the contrast between the NR phase and the secondary polymers in the composite latex particles. A semicontinuous feeding process decreased the PS subinclusions size by a factor of 6 in comparison with a batch reaction. Depending on the NR/styrene swelling ratio, the crosslinking degree, and the polymerization temperature used, distinct differences of the phase arrangement of polymers in the latex particles were revealed. © 1996 John Wiley & Sons, Inc.     

Synthesis of model latices for the study of coalescence mechanisms

This work describes the synthesis of model latices devoted to the study of the influence of particle-water and particle-air interfacial energies on coalescence mechanisms. Core-shell particles with the same diameter (? 2600 Å) and narrow size distributions were prepared. The core is a poly(styrene-co-butyl acrylate) (60/40 wt %) copolymer; it represents 90% of the volume of the particle. The shell is a poly(St-BuA-methacrylic acid) terpolymer with 10, 15, or 25 wt % MAA. The St-BuA weight ratio in the shell is also 60/40. The amount of MAA in the shell determines the particle-water or air interfacial energies. In order to limit the use of an emulsifier and to ensure a homogeneous particle surface layer, an inverted core-shell synthesis was performed. The hydrophilic shell was prepared first and used as a seed for the synthesis of the hydrophobic core. For all three core-shell latices, about 45% of the introduced MAA was found at the surface of the particles, which indicates that the core-shell inversion was successful. The synthesis of the latices with 10 or 15 wt % MAA was relatively easy, whereas the particle size was difficult to control in the 25 wt % MAA latex synthesis.     

Biodegradation of PHBV/GNS nanocomposites by Penicillium funiculosum

Biodegradable polymer nanocomposites are an essential alternative to minimize the generation of polymeric solid waste that shows short shelf life and difficult degradation. In this study, nanocomposites based on poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) were prepared by the incorporation of different contents, 0.25, 0.50, 0.75, and 1.00 wt % of graphite nanosheets (GNS), using a solution casting method. The investigation of the PHBV samples biodegradation was made using filamentous fungi (Penicillium funiculosum) in solid medium. Characterization of the material was performed by weight loss, differential scanning calorimetry, carbonyl index determined by Fourier transformed infrared spectroscopy, contact angle, roughness, and scanning electron microscopy. Results revealed that PHBV/GNS nanocomposites can be totally degraded in the presence of Penicillium funiculosum; however, it will be necessary high incubation period. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44234.     

Current advances concerning the most cited metal ions doped bioceramics and silicate-based bioactive glasses for bone tissue engineering

Studies related to biomaterials that stimulate the repair of living tissue have increased considerably, improving the quality of many people's lives that require surgery due to traumatic accidents, bone diseases, bone defects, and reconstructions. Among these biomaterials, bioceramics and bioactive glasses (BGs) have proved to be suitable for coating materials, cement, scaffolds, and nanoparticles, once they present good biocompatibility and degradability, able to generate osteoconduction on the surrounding tissue. However, the role of biomaterials in hard tissue engineering is not restricted to a structural replacement or for guiding tissue regeneration. Nowadays, it is expected that biomaterials develop a multifunctional role when implanted, orchestrating the process of tissue regeneration and providing to the body the capacity to heal itself. In this way, the incorporation of specific metal ions in bioceramics and BGs structure, including magnesium, silver, strontium, lithium, copper, iron, zinc, cobalt, and manganese are currently receiving enhanced interest as biomaterials for biomedical applications. When an ion is incorporated into the bioceramic structure, a new category of material is created, which has several unique properties that overcome the disadvantages of primitive material and favors its use in different biomedical applications. The doping can enhance handling properties, angiogenic and osteogenic performance, and antimicrobial activity. Therefore, this review aims to summarize the effect of selected metal ion dopants into bioceramics and silicate-based BGs in bone tissue engineering. Furthermore, new applications for doped bioceramics and BGs are highlighted, including cancer treatment and drug delivery.     

Fast intra prediction algorithm based on texture analysis for 3D-HEVC encoders

The advances in display technologies and the growing popularity of 3D video systems have attracted more consumers for 3D viewing experiences, and, consequently, the demand for storage and transmission of 3D video content is increasing. To cope with this demand, a 3D video extension of high-efficiency video coding (HEVC) standard is being developed and near the final standardization stage. The upcoming 3D-HEVC standard is expected to provide higher encoding efficiency than its predecessors, supporting multiple views with high resolution, at a cost of considerable increase in computational complexity, which can be an obstacle to its use in real-time applications. This article proposes a novel complexity reduction algorithm developed to optimize the 3D-HEVC intra mode decision targeting real-time video processing for consumer devices with limited computational power, such as 3D camcorders and smartphones equipped with multiple cameras and depth acquisition capabilities. The proposed algorithm analyzes the texture frames and depth maps to estimate the orientation of edges present in the prediction unit data, speeding up the intra prediction process and reducing the 3D-HEVC encoding processing time. Experimental results demonstrate that the proposed algorithm can save 26 % in computational complexity on average with negligible loss of encoding efficiency. This solution contributes to make more feasible the compression of 3D videos targeting real-time applications in power-constrained devices.