Transmission loss allocation through equivalent bilateral exchanges and economical analysis

A new loss allocation (LA) scheme based on the principle of equivalent bilateral exchanges (EBEs) is presented and compared with other available techniques. Formulation and results from extensive simulations including consistency tests show that the suggested methodology has several desirable properties: It is flow-based, requiring only a solved load flow for its implementation; it is not dependent on the choice of a slack bus; it is straightforward to apply; undesirable negative loss allocation is not produced; and low volatilities are shaped. An economic analysis with various LA methods is also carried out when these are integrated into a combined economic dispatch/load flow dispatch strategy, a likely scenario for LA in a real system. This combined dispatch strategy yields prices charged to the loads and rates received by the generators that account for loss allocation and loss supply. Results show that these economic indexes are very close to the marginal costs derived from an optimal power flow (OPF) approach with the advantage of reducing volatility.     

Nephelometric study of salivary protein–tannin aggregates

Grape seed procyanidins were fractionated through different degrees of polymerisation, and human saliva was purified and separated into two fractions: one was mostly α‐amylase and the other was essentially proline‐rich proteins (PRPs). The interaction of these proteins with the procyanidin compounds was assayed using nephelometry, and the influence of several factors was investigated, such as degree of polymerisation, pH and concentrations of both protein and tannin. The same experiments were performed with bovine serum albumin (BSA). The amount of insoluble aggregates, resulting from the formation of polyphenol–protein aggregates, increased quickly up to a maximum value which thereafter remained practically unchanged. pH was set at 5.0 for all further assays, since it was the nearest value to that encountered in human saliva (pH 5.6–7.9), where proteins were stable and had a maximum ability to bind and precipitate procyanidin oligomers. These proteins were shown to have a strong affinity for procyanidin oligomers and were unable to resolubilise the polyphenol–protein aggregates when present in excess. PRPs required a much lower content to bind all the tannins (400 µg of procyanidin oligomers) than BSA and especially α‐amylase (48, 60 and 132 µg respectively). The procyanidin's ability to bind PRPs, BSA and α‐amylase increased with its average molecular weight. This ability increased regularly for PRPs up to 4500 Da, whereas the ability to bind the globular proteins decreased beyond 3400 Da. © 2001 Society of Chemical Industry     

Simultaneous HPLC quantification of total cholesterol,tocopherols and β-carotene in Barrosã-PDO veal

A simple, rapid and sensitive procedure for the simultaneous determination of total cholesterol, tocopherols and β-carotene in meat is described. The method involves a direct saponification of the meat, a single n-hexane extraction and the analysis of the extracted compounds by normal-phase HPLC, using fluorescence (tocopherols) and UV–Vis photodiode array (cholesterol and β-carotene) detections in tandem. Rates of recovery of spiked meat samples were 93% for cholesterol, 83–86% for (α-, β- and -γ) tocopherols and 89% for β-carotene. Repeatabilities were high (CV < 6%) for all determined compounds, except for δ-tocopherol. This tocopherol, which is not usually present in meat, showed a much lower recovery percentage (73%) and repeatability (12.8%). This methodology was applied for the quantification of total cholesterol, tocopherols and β-carotene in three muscles (longissimus thoracis, longissimus lumborum and semitendinosus) of the Portuguese traditional Barrosã-PDO veal, obtained from autochthonous calves fed extensively during summer (with the least abundant green pastures) and slaughtered in early autumn (October). Barrosã-PDO veal showed median contents of total cholesterol (0.50–0.56 mg/g) and, depending on the analysed muscle, moderate to high contents of α-tocopherol (3.3–3.9 μg/g) and β-carotene (0.07–0.09 μg/g), suggesting an high sensorial and hygienic quality.     

Linear mixture model applied to Amazonian vegetation classification

Many research projects require accurate delineation of different secondary succession (SS) stages over large regions/subregions of the Amazon basin. However, the complexity of vegetation stand structure, abundant vegetation species, and the smooth transition between different SS stages make vegetation classification difficult when using traditional approaches such as the maximum likelihood classifier (MLC). Most of the time, classification distinguishes only between forest/non-forest. It has been difficult to accurately distinguish stages of SS. In this paper, a linear mixture model (LMM) approach is applied to classify successional and mature forests using Thematic Mapper (TM) imagery in the Rondônia region of the Brazilian Amazon. Three endmembers (i.e., shade, soil, and green vegetation or GV) were identified based on the image itself and a constrained least-squares solution was used to unmix the image. This study indicates that the LMM approach is a promising method for distinguishing successional and mature forests in the Amazon basin using TM data. It improved vegetation classification accuracy over that of the MLC. Initial, intermediate, and advanced successional and mature forests were classified with overall accuracy of 78.2% using a threshold method on the ratio of shade to GV fractions, a 7.4% increase over the MLC. The GV and shade fractions are sensitive to the change of vegetation stand structures and better capture biophysical structure information.     

Fuzzy ontologies-based user profiles applied to enhance e-learning activities

Nowadays, the impact of technological developments on improving human activities is becoming more evident. In e-learning, this situation is no different. There are common to use systems that assist the daily activities of students and teachers. Typically, e-learning recommender systems are focused on students; however, teachers can also benefit from these type of tools. A recommender system can propose actions and resources that facilitate teaching activities like structuring learning strategies. In any case, a complete user’s representation is required. This paper shows how a fuzzy ontology can be used to represent user profiles into a recommender engine and enhances the user’s activities into e-learning environments. A fuzzy ontology is an extension of domain ontologies for solving the problems of uncertainty in sharing and reusing knowledge on the Semantic Web. The user profile is built from learning objects published by the user himself into a learning object repository. The initial experiment confirms that the automatically obtained fuzzy ontology is a good representation of the user’s preferences. The experiment results also indicate that the presented approach is useful and warrants further research in recommending and retrieval information.     

Analytical ray tracing system: Introducing art, a C-library designed for seismic applications

Ray tracing technique is an important tool not only to forward but also for inverse problems in Geophysics, which most of the seismic processing steps depend on. However, implementing ray tracing codes can be very time consuming. This article presents a computer library to trace rays in 2.5D media composed by a stack of layers. The velocity profile inside each layer is such that the eikonal equation can be analytically solved. Therefore, the ray tracing within such profile is made fast and accurate. The great advantage of an analytical ray tracing library is the numerical precision of the quantities computed and the fast execution of the implemented codes. Even though ray tracing programs exist for a long time, for example the seis88 package by ?ervený, most of those programs use a numerical approach to compute the ray. Regardless of the fact that numerical methods can solve more general problems, the analytical ones could be part of a more sophisticated simulation process, where the ray tracing time is completely relevant. We demonstrate the feasibility of our codes using several examples (Miqueles et al., 2013)  [1]. The library can also be used for other applications besides seismic, e.g., optics and tomography.     

Development and implementation of clinical guidelines: An artificial intelligence perspective

Clinical practice guidelines in paper format are still the preferred form of delivery of medical knowledge and recommendations to healthcare professionals. Their current support and development process have well identified limitations to which the healthcare community has been continuously searching solutions. Artificial intelligence may create the conditions and provide the tools to address many, if not all, of these limitations.. This paper presents a comprehensive and up to date review of computer-interpretable guideline approaches, namely Arden Syntax, GLIF, PROforma, Asbru, GLARE and SAGE. It also provides an assessment of how well these approaches respond to the challenges posed by paper-based guidelines and addresses topics of Artificial intelligence that could provide a solution to the shortcomings of clinical guidelines. Among the topics addressed by this paper are expert systems, case-based reasoning, medical ontologies and reasoning under uncertainty, with a special focus on methodologies for assessing quality of information when managing incomplete information. Finally, an analysis is made of the fundamental requirements of a guideline model and the importance that standard terminologies and models for clinical data have in the semantic and syntactic interoperability between a guideline execution engine and the software tools used in clinical settings. It is also proposed a line of research that includes the development of an ontology for clinical practice guidelines and a decision model for a guideline-based expert system that manages non-compliance with clinical guidelines and uncertainty.     

The Building Blocks of a PaaS

Traditional cloud computing providers enable developers to program and deploy applications in the cloud by using platform as a service (PaaS) providers. Despite the benefits of such an approach, this service model usually comes with a high level of the lock in effect into the service provider. The lock in effect occurs when a software developer needs to change its cloud provider. When this happens, it usually means a major application rewrite, specific for the new PaaS. This paper details the initial results of a project whose goal is to build a PaaS where vendor lock in does not occur. With this PaaS, developers wishing to deploy their applications into the cloud may continue to program using their usual development environments. There are no necessary changes required to make the application PaaS compatible. As a proof of concept, we developed an open source PaaS management application as a regular web application and then deployed it on the cloud.     

Influence of green creativity on organizations: A case study from the perspectives of leaders and subordinates

The sustainability framework has a strong influence on the policies, practices and procedures of companies. Green creativity plays a pivotal role in the development of initiatives and innovations for the environmental pillar of sustainability. Based on a survey applied to a Portuguese company with an accredited environmental management system (N = 146), the findings reveal that green creativity is influenced in different ways when analysed from distinct perspectives. The leader's green creativity is positively influenced by the subordinate's green self-efficacy and personal identification with the leader, whereas the subordinate's green creativity is positively influenced by their green passion and green self-efficacy, and the leaders' green creativity. This study shows that green creativity develops differentially according to distinct job positions and expectations that in practice must be complementary and synergistic for its effective development.