Browsing the information highway while driving: three in-vehicle touch screen scrolling methods and driver distraction

Distraction effects of three alternative touch screen scrolling methods for searching music tracks on a mobile device were studied in a driving simulation experiment with 24 participants. Page-by-page scrolling methods with Buttons or Swipe that better facilitate resumption of visual search following interruptions were expected to lead to more consistent in-vehicle glance durations and thus on less severe distraction effects than Kinetic scrolling. As predicted, Kinetic scrolling induced decreased visual sampling efficiency and increased visual load compared with Swipe, increased experienced workload compared with both Buttons and Swipe, as well as decreased lane-keeping accuracy compared with baseline. However, Buttons did not significantly excel Kinetic with any metric but on subjective ratings. Based on the results, we do not recommend the use of kinetic scrolling with in-vehicle touch screen displays in the manner used in the experiment. Instead, page-by-page swiping seems to suit significantly better for in-vehicle displays due to its systematic nature and low levels of pointing accuracy required for scrolling the pages.     

The effect of dietary forage to concentrate ratio and forage type on milk fatty acid composition and milk fat globule size of lactating cows

We examined the effects of 2 grass silage-based diets differing in forage:concentrate (FC) ratio and those of a red clover silage-based diet on intake, milk production, ruminal fatty acid (FA) biohydrogenation, milk FA composition, and milk fat globule (MFG) size distribution. Ten multiparous Nordic Red cows received the following treatments: grass silage-based diets containing high (70:30, HG) or low (30:70, LG) FC ratio or a red clover silage-based diet with an FC ratio of 50:50 (RC) on a dry matter basis. Determinations of MFG were performed from fresh milk samples without addition of EDTA so the results of fat globules >1 µm in diameter are emphasized instead of the entire globule population. Lower FC ratio in grass silage-based diets increased milk production with no effect on daily fat yield, leading to 13% lower milk fat concentration. The effect of FC ratio on MFG size was moderate. It did not affect the volume-weighted diameter in grass silage-based diets, although LG lowered the volume-surface diameter of MFG in the size class >1 µm compared with HG. Compared with HG, feeding LG moderately decreased the biohydrogenation of 18:2n-6, leading to a higher level of polyunsaturated fatty acids in milk fat. Feeding RC lowered milk fat concentration and daily milk fat yield compared with grass silage-based diets. The volume-weighted diameter of MFG in the size class >1 µm was smaller in RC milk compared with grass silage-based diets. Feeding RC increased the flow of 18:3n-3 at the omasum by 2.4-fold and decreased the apparent ruminal 18:3n-3 biohydrogenation compared with grass silage-based diets despite similar intake of 18:3n-3. It also resulted in the lowest amount of saturated FA and the highest amounts of cis-9 18:1, 18:3n-3, and polyunsaturated FA in milk. In conclusion, LG decreased milk fat content and induced minor changes in MFG size distribution compared with HG, whereas RC lowered milk fat production, altered milk FA composition to nutritionally more beneficial direction, and led to smaller MFG compared with grass silage-based diets.     

Identification of 4-Anilinoquin(az)oline as a Cell-Active Protein Kinase Novel 3 (PKN3) Inhibitor Chemotype**

Deep annotation of a library of 4-anilinoquin(az)olines led to the identification of 7-iodo-N-(3,4,5-trimethoxyphenyl)quinolin-4-amine 16 as a potent inhibitor (IC₅₀=14 nM) of Protein Kinase Novel 3 (PKN3) with micromolar activity in cells. Compound 16 is a potential tool compound to study the cell biology of PKN3 and its role in pancreatic and prostate cancer and T-cell acute lymphoblastic leukemia. These 4-anilinoquin(az)olines may also be useful tools to uncover the therapeutic potential of PKN3 inhibition in a broad range of diseases.     

Structure formation mechanisms in consolidating pigment coatings—Simulation and visualisation

Microstructure development in consolidating pigment coating layers was studied in terms of particle flocculation and clustering mechanisms utilising a 3D particle dynamics model. The model includes hydrodynamic forces, colloidal interactions as well as the Brownian motion. The influence of colloidal interactions and drying strategy on the coating layer thickness development and internal solid concentration gradients, was investigated. A low particle surface potential resulted in the formation of porous particle networks, which impeded the shrinkage of the coating layer. At higher surface potentials particles arranged into denser structures, whereby the solids concentration profile could be controlled by the drying. Low electrostatic double layer thicknesses allowed sharp concentration gradients to form as result of the applied drying strategy. At high double layer thicknesses, the structure formation was similar regardless of drying strategy. This work elucidates the combined effect of drying conditions and colloidal suspension properties on coating microstructure development. Furthermore, the results aid in the understanding of how coating suspension additives may influence the structure development of the coating layer.     

Electrical capacitance tomography as a monitoring tool for high-shear mixing and granulation

Electrical capacitance tomography (ECT) was utilized for monitoring of high-shear mixing and high-shear granulation processes. A finite element method (FEM)-based reconstruction algorithm was utilized to take into account the specific geometrical characteristics of the experimental set-up. Two-dimensional ECT tomograms, mixing index curves and permittivity fractions were computed based on the measurements, and their suitability in the analysis of the processes was assessed. It was found that the different mixing processes and the different granulation processes could be analyzed based on these quantities.     

Identification and Optimization of 4‐Anilinoquinolines as Inhibitors of Cyclin G Associated Kinase

4‐Anilinoquinolines were identified as potent and narrow‐spectrum inhibitors of the cyclin G associated kinase (GAK), an important regulator of viral and bacterial entry into host cells. Optimization of the 4‐anilino group and the 6,7‐quinoline substituents produced GAK inhibitors with nanomolar activity, over 50 000‐fold selectivity relative to other members of the numb‐associated kinase (NAK) subfamily, and a compound (6,7‐dimethoxy‐N‐(3,4,5‐trimethoxyphenyl)quinolin‐4‐amine; 49 ) with a narrow‐spectrum kinome profile. These compounds may be useful tools to explore the therapeutic potential of GAK in prevention of a broad range of infectious and systemic diseases.     

Direct synthesis of carbon nanofibers on the surface of copper powder

A novel approach to synthesize carbon nanofibers (CNFs) directly on the surface of metal μm-sized particles to evenly disperse the carbon nanomaterials in a composite material was proposed. As a metal matrix, 5–10 μm copper particles were utilized. As a carbon source, C₂H₂, CH₄ and CO were examined. The best conditions were found to be in C₂H₂ (30 cm³/min) and H₂ (260 cm³/min) atmosphere at the temperature of 750 °C. The composites based on copper and CNFs prepared by vacuum hot pressing showed the increase in hardness from 35 to 60 kg/mm² almost retaining pure copper electrical properties.     

Characterization of polyesters prepared from three different phthalic acid isomers by CID-ESI-FT-ICR and PSD-MALDI-TOF mass spectrometry

Polyesters prepared from the same diol, 2-butyl-2-ethyl-1,3-propanediol, but different phthalic acid isomers, phthalic, isophthalic, and terephthalic acid, were characterized by collision-induced dissociation electrospray ionization Fourier transform ion cyclotron resonance (CID-ESI-FT-ICR) and postsource-decay matrix-assisted laser desorption/ionization time-of-flight (PSD-MALDI-TOF) mass spectrometry. Sodiated dihydroxyl-terminated polyester oligomers containing five repeating units at m/z 1634 were selected as precursor ions for dissociation studies. Two main mechanisms occurred in the fragmentation of all of the polyesters, since dissociation of the oligomers was initiated by hydrogen rearrangement or transesterification reactions. Polyesters prepared from different phthalic acid isomers could be distinguished by their fragmentation behavior. Polyester prepared from phthalic acid was easily identified by using both CID-ESI-FT-ICR and PSD-MALDI-TOF mass spectrometry. However, distinguishing between the polyesters prepared from isophthalic and terephthalic acid succeeded marginally only with CID-ESI-FT-ICR mass spectrometry. Molecular dynamics calculations were used to obtain an idea of the fragmentation behavior of the polyesters. The low-energy structures of the precursor ions were determined, and the coordination of the oxygen atoms of the polyester oligomers to the sodium cation was examined more closely. Both the experimental and the theoretical studies showed that the sodium ion affinity of polyester changed with the phthalic acid isomer.     

Fixation of distal femoral osteotomies with self-reinforced poly(L/DL)lactide 70 : 30/bioactive glass composite rods. An experimental study on rats

Self-reinforced poly(L/DL)lactide 70:30/bioactive glass [SR-P(L/DL)LA/bioactive glass] composite rods, 2 mm in diameter and 36 mm in length, were implanted into the dorsal subcutaneous tissue of 16 rats. Osteotomies of the distal femur were fixed with these rods (2 x 15 mm) in 64 other rats. The follow-up times varied from one week to one year. After sacrifice, three-point bending and shear tests, and molecular weight measurements were performed for subcutaneously placed rods. Radiological, histological, histomorphometrical, microradiographic, and oxytetracycline-fluorescence studies of the osteotomized and intact control femora were performed. At 24 weeks the mechanical properties had decreased significantly. Thirty-nine osteotomies healed uneventfully. One of the 64 evaluated osteotomies showed signs of infection at six weeks, and there were 19 non-unions and six delayed unions. In 20 operations the fixation was loose and out of these 14 non-unions were observed. No gross signs of inflammatory or foreign-body reactions were observed. The present investigation showed that the mechanical strength and fixation properties of SR-P(L/DL)LA/bioactive glass composite rods are suitable for fixation of cancellous bone osteotomies in rats as long as the operative technique is correct. The present article is the first report on the application of SR-P(L/DL)LA/bioactive glass composite rods for fixation of cancellous bone osteotomies.