Repair of damaged aluminum truss joints of highway overhead sign structures using FRP

An innovative repair technique is introduced for aluminum truss-type highway overhead sign structures, using fibre-reinforced polymer (FRP) sheets. The welded k-joints are typically subjected to excessive fatigue-induced cracking under the effects of wind and moving traffic. The repair technique proposed in this paper utilizes longitudinal FRP layers bonded to the diagonals and wrapped around the main chord to form alternating v-patterns, followed by additional circumferential layers for anchorage. Eight tests were conducted on four full-scale specimens. Weld lines at the junction between diagonals and main chord were ground to simulate a 90% loss of joint strength. After repair, diagonals were loaded to failure in tension. The study showed that full strength of the welded joints was restored using carbon-FRP sheets. Only 70% of joint strength was restored when using glass-FRP. The strengthening technique is particularly sensitive to quality control during installation. A field application using the proposed technique was successfully completed by the New York State Department of Transportation for a cracked aluminum truss over Route 88 in NY State.     

Shifting the pH Optima of (R)-Selective Transaminases by Protein Engineering

Amine transaminases (ATAs) are powerful biocatalysts for the stereoselective synthesis of chiral amines. However, wild-type ATAs usually show pH optima at slightly alkaline values and exhibit low catalytic activity under physiological conditions. For efficient asymmetric synthesis ATAs are commonly used in combination with lactate dehydrogenase (LDH, optimal pH: 7.5) and glucose dehydrogenase (GDH, optimal pH: 7.75) to shift the equilibrium towards the synthesis of the target chiral amine and hence their pH optima should fit to each other. Based on a protein structure alignment, variants of (R)-selective transaminases were rationally designed, produced in E. coli, purified and subjected to biochemical characterization. This resulted in the discovery of the variant E49Q of the ATA from Aspergillus fumigatus, for which the pH optimum was successfully shifted from pH 8.5 to 7.5 and this variant furthermore had a two times higher specific activity than the wild-type protein at pH 7.5. A possible mechanism for this shift of the optimal pH is proposed. Asymmetric synthesis of (R)-1-phenylethylamine from acetophenone in combination with LDH and GDH confirmed that the variant E49Q shows superior performance at pH 7.5 compared to the wild-type enzyme.     

Whole Exome Sequencing Identifies a Heterozygous Variant in the Cav1.3 Gene CACNA1D Associated with Familial Sinus Node Dysfunction and Focal Idiopathic Epilepsy

Cav1.3 voltage-gated L-type calcium channels (LTCCs) are involved in cardiac pacemaking, hearing and hormone secretion, but are also expressed postsynaptically in neurons. So far, homozygous loss of function mutations in CACNA1D encoding the Cav1.3 α₁-subunit are described in congenital sinus node dysfunction and deafness. In addition, germline mutations in CACNA1D have been linked to neurodevelopmental syndromes including epileptic seizures, autism, intellectual disability and primary hyperaldosteronism. Here, a three-generation family with a syndromal phenotype of sinus node dysfunction, idiopathic epilepsy and attention deficit hyperactivity disorder (ADHD) is investigated. Whole genome sequencing and functional heterologous expression studies were used to identify the disease-causing mechanisms in this novel syndromal disorder. We identified a heterozygous non-synonymous variant (p.Arg930His) in the CACNA1D gene that cosegregated with the combined clinical phenotype in an autosomal dominant manner. Functional heterologous expression studies showed that the CACNA1D variant induces isoform-specific alterations of Cav1.3 channel gating: a gain of ion channel function was observed in the brain-specific short CACNA1D isoform (Cav1.3_S), whereas a loss of ion channel function was seen in the long (Cav1.3_L) isoform. The combined gain-of-function (GOF) and loss-of-function (LOF) induced by the R930H variant are likely to be associated with the rare combined clinical and syndromal phenotypes in the family. The GOF in the Cav1.3_S variant with high neuronal expression is likely to result in epilepsy, whereas the LOF in the long Cav1.3_L variant results in sinus node dysfunction.     

拉幅干燥机的计算流体力学模拟

计算流体力学模拟可检测拉幅干燥机内的气体流动过程,并对喷嘴指板后端和通风机上端潜在的问题区域进行检测。蒸发过程的模拟表明,织物表面温度与水分的分布不均匀。然而,由于缺乏设备对实验模拟数据进行认征,故无法判断其可靠性。     

SIMULATION OF THE PROCESS STABILITY OF HPC MILLING OPERATIONS

The optimisation of high-performance cutting (HPC) processes under technological and economical aspects often proves to be extremely difficult due to the appearance of process instabilities, so-called “chatter”. The identification of ideal process parameters often involves the systematic testing with varied cutting parameters. Simulation of the process stability offers a less costly way of optimising processes prior to production. However, the predictions for the stability of high performance milling processes exhibit great deviation from experimental results. The objective is to analyse and to prevent errors within the simulation methods to make stability simulation a reliable tool in process planning. In order to improve the quality of stability simulation, the interacting Systems “Machine Tool” and “Cutting Process” are analysed individually. Methods for the coupled simulation of both systems are implemented to identify stable working conditions. As a result of this work, a time domain simulation environment for the investigation of high performance milling operations is presented. It considers the complex behaviour of the cutting process as well as the speed dependent machine tool dynamics. Cutting tests have been conducted to verify the benefit of the enhanced simulation method.