Moisture Dependent Physical Properties of Dry Sweet Corn Kernels

Physical properties of sweet corn kernels have been evaluated as a function of kernel moisture content, varying from 9.12 to 17.06% (db). In the moisture range, kernel length, width, thickness, and geometric mean diameter increased linearly from 9.87 to11.09 mm, 7.41 to 9.25 mm, 3.25 to 4.37 mm, and 6.18 to 7.62 mm, respectively, with increase in moisture content from 9.12–17.06%. The sphericity index, kernel volume, kernel surface area, and thousand seed weight increased linearly from 62.6 to 68.8, 93.8 to 194.3 mm³, 120.1 to 182.9 mm², and 220 to 268 gr, respectively. Apparent density and bulk density decreased linearly from 1.315 to 1.232 g/cm³ and 0.765 to 0.698 g/cm³, respectively, while bulk porosity increased from 41.8 to 43.3%. The highest static coefficient of friction was found on the plywood surface. The static coefficient of friction increased from 0.680 to 0.891, 0.605 to 0.741, and 0.530 to 0.644 for plywood, galvanized iron, and aluminum surfaces, respectively. The angle of repose increased linearly from 30.2 to 35.2° with the increase of moisture content.     

Ionic liquid intercalated clay nanofillers for chromatographic applications

In this study, the preparation and characterization of ionic liquid (IL) intercalated montmorillonite (MMT) and their application as a micro-solid phase extraction material for the determination of Chlorpyrifos (CP) pesticide in water samples were reported. The ionic liquids bearing different chain lengths [1-methyl-3-octylimidazolium bromide (C₈mimBr), 1-methyl-3-undecyl-imidazolium bromide (C₁₂mimBr) and 1-methyl-3-octadecyl-imidazolium bromide (C₁₈mimBr)] were intercalated in the galleries of MMT. The IL-intercalated MMTs were characterized by means of XRD and TG methods. The (C₁₂mimBr)-intercalated MMT had the highest sorption efficiency for the CP, which was 32 times higher than the original MMT. We also optimized the parameters for extracting CP from the (C₁₂mimBr)-intercalated MMT.     

Angiocentric T-cell lymphoma of the lung mimicking metastatic carcinoma. Case report

Displacement of soft tissue adjacent to an implant abutment is arduous. Currently, gingival retraction cord is used before making an impression for cement-retained implant restoration. This article presents a new impression system for a cementable abutment/implant. The advantages of a cement-retained implant crown are described. This system provides efficient and accurate impressions.     

Graphene oxide-containing isocyanate-based polyimide foams: Enhanced thermal stability and flame retardancy

Isocyanate-based graphene oxide-containing polyimide foams were synthesized by a semi-prepolymer method. In this method, while the first solution containing pre-polymer was derived from pyromellitic dianhydride and excess polymethylene polyphenylene isocyanate (PM200), the second solution contains dianhydride derivatives, water, catalysts, surfactants, and graphene oxide. PIFs were prepared with 0%, 0.25%, 0.50%, 0.75%, and 1% graphene oxide by weight, respectively. PIFs exhibited a minimum side reaction and urea generation was not seen for all PIFs instead of imide bonding. The addition of graphene oxide (GO) leads to a more close-packed structure. Therefore, crosslinking density and thermal stability of graphene oxide-containing polyimide foams increased. Upon the addition of 1% GO, almost seven times higher compression strength was obtained compared to neat PIFs. Also, LOI values supported the theory that thermally stable and flame retardant PIFs can be synthesized via the isocyanate-based process with GO.     

Some results on disturbance attenuation for Hamiltonian systems via direct discrete‐time design

The disturbance attenuation and robust disturbance attenuation problems for Hamiltonian systems in the discrete‐time setting are considered and some new results are presented. The new results are derived utilizing the recently presented dissipativity equality obtained by adding the dissipation rate function to the classical dissipativity inequality. A selection of the dissipation rate function yields new results. These results include a condition on the dissipation structure of the system to achieve the desired disturbance attenuation level and gives direct construction of optimal control laws for any desired disturbance attenuation level. The results remove the need to solve Hamilton–Jacobi–Isaacs inequalities. Copyright © 2014 John Wiley & Sons, Ltd.