Effects of Sr2+ substitution on the crystal structure,Raman spectra,bond valence and microwave dielectric properties of Ba3-xSrx(VO4)2 solid solutions

The effects of Sr²⁺ substitution for Ba²⁺ on microwave dielectric properties and crystal structure of Ba_3-xSr_x(VO₄)₂ (0 ≤ x ≤ 3, BSVO) solid solution were investigated. Such Sr²⁺ substitution contributes to significant reduction in sintering temperature from 1400 °C to 1150 °C. Both permittivity (∑_r) and quality factor (Q × f) values decreased with increasing x value, which was determined to be related with the descending values of average polarizability and packing fraction, whereas the increase in τ_f value was explained by the decreased average VO bond length, A-site bond valence. BSVO ceramics possessed encouraging dielectric performances with ∑_r = 12.2–15.6 ± 0.1, Q × f = 44,340 - 62,000 ± 800 GHz, and τ_f = 24.5–64.5 ± 0.2 ppm/°C. Low-temperature sintering was manipulated by adding B₂O₃ as sintering additive for the representative Sr₃V₂O₈ (SVO) ceramic and only 1 wt.% B₂O₃ addition successfully contributed to a 21.7% decrease in sintering temperature to 900 °C, showing good chemical compatibility with silver electrodes, which render BSVO series and SVO ceramics potential candidates in multilayer electronic devices fabrication.     

What can be taught in architectural design? — <Emphasis Type="Italic">parti,poché</Emphasis>, and felt qualities

This essay begins with a reflection on what has been taught in architectural design since the turn of the twentieth century. I shall trace back to the two disciplinary foundations of the French École des Beaux-Arts — parti and poché — in the education of an architect in the eighteenth and nineteenth centuries. I shall then attempt to superimpose parti and poché on a modern disciplinary framework, say that of mathematics, which leads to musings on a series of architectural problems that include pattern versus type, stability versus mobility, orthogonal versus oblique, confinement versus transparency, and aging versus metallic sheen. These paradoxes, I suggest, demand the education of an architect to address both the instrumental pattern of a building configuration and the ambient felt qualities of a room, rather than vision alone.     

Spatial competition and regulatory change in the grain handling and transportation system in western Canada

The grain handling and transportation system (GHTS) has been a defining component of the western Canadian economy since the early part of the last century. Only two major railways serve the grain handling industry, so the potential for the exercise of market power in transportation appears to be significant. In fact, spatially oriented regulations applicable to railways exist in Canada to mitigate this, but to date they have not often been used by shippers. While the reasons for this are not completely clear, we suggest that the regulations are now inadequate for the current state of the GHTS. Using a unique data set from the year 2000, we assess the effect on the grain handling industry of modifications to these regulations, and find that significant gains for shippers from these modifications are possible. These gains are computed to be on the order of C$10–15 million per year for grain shippers alone. We would like to thank conference and presentation participants (Transportation Research Board, Canadian Agricultural Economics Society, University of British Columbia, University of Leeds and California State University, Long Beach) as well as the anonymous reviewers who commented on the earlier versions of this paper. We would also like to acknowledge support from the Saskatchewan Department of Highways.     

Probabilistic loss assessment of light-frame wood construction subjected to combined seismic and snow loads

In some areas, e.g., mountainous areas in the western United States, both seismic and snow loads are significant. Limited research has been conducted to investigate the seismic risk of light-frame wood construction in those areas considering the combined loads, particularly the snow accumulation. An object-oriented framework of the risk assessment for light-frame wood construction subjected to combined seismic and snow hazards is proposed in this paper. A typical one-story light-frame wood residential building is selected to demonstrate the proposed framework. Economic losses of the building due to the combined hazards are evaluated using the proposed framework. It is found that in areas with significant snow accumulation, the snow load has significant effects on the seismic risk assessment for light-frame wood construction.     

Decomposing regional productivity growth using an aggregate production frontier

The main contribution of this paper is the implementation of a new model which combines the two parametric approaches most commonly used in the productivity literature: fixed effects and stochastic frontiers. This allows us to discuss whether it is better to use average or frontier functions to estimate regional productivity. The empirical section uses panel data of Spanish regions over the period 1980–1995. Additionally, we calculate and decompose total factor productivity growth for the Spanish regions.     

CorelDraw地图符号的设计制作与应用

较详细地介绍了CorelDraw软件平台地图符号的设计方法、制作技巧和应用经验。     

灌注桩加固厂房柱基

在对原有厂房的技术改造中，需将原厂房轴四根柱子拔除，使得留存的柱子上的荷载增加数倍。本文对柱下基础采用钻孔灌注桩加固的经验进行了介绍。     

浅谈图底关系理论在城市设计中的应用

图底关系理论是美国康奈尔大学的罗杰·特兰西克教授在《寻找失落的空间》一书中提出的一种有关城市设计的重要理论。本文着重探讨了该理论在城市设计中的应用前景,并通过实例阐述了该理论在城市空间总体层面和城市空间具体层面上的应用价值和方法。     

港渝两地边坡工程中土钉技术的对比研究

香港经过20a的理论研究和工程实践，总结出一套较完善的土钉加固边坡的设计、施工方法和规范；重庆在多年采用土钉加固土质和强风化岩质边坡的工程实践中取得了大量经验，并颁布了相关的规范。港渝两地具有既相似又各有特点的地形地貌和工程地质条件，通过对比分析和研究了两地土钉边坡设计步骤和施工方法及特点，为边坡加固工程中采用土钉技术提供了参考意见。