玻璃钢筋混凝土的有限元计算与试验

钢筋混凝土广泛应用于土木工程领域，但其结构耐久性因钢筋本身的锈蚀成为现今急待解决的问题。人们一直在寻找对钢筋混凝土进行改良的途径，用玻璃钢筋代替普通钢筋是解决这一问题的一个有效的方法，为此进行了试验和ANSYS有限元分析，结果证明此法具有可行性。     

矾土尖晶石钢包浇注料的研制与应用

采用特级矾土熟料为骨科，天然出合成的镁铝尖晶石为部分基质，选用新型复合结合剂研制成矾土尖晶石质钢包浇注料．使用结果表明：一次性寿命较传统的铝镁浇注料提高８０％以上．     

一种新的S/PDIF接收机数据译码的实现方法

论文分析了S/PDIF音频数据流的特点,引入模式识别中的训练机对S/PDIF音频数据流进行现场脉冲宽度特征提取。依据训练机结果建立分类器实现脉冲宽度分类,根据脉冲宽度进行同步前置码和逻辑电平的解码。利用硬件描述语言Verilog进行设计实现与验证,仿真结果说明这种特征提取方法可以提高S/PDIF接收机数据解译码的适应性和准确性。     

Synthesis and Morphology of TiO2 Nanotube Arrays by Anodic Oxidation Using Modified Glycerol-Based Electrolytes

Titanium dioxide (TiO₂) nanotube arrays were prepared by electrochemical anodization of titanium sheets in the glycerol 176 mL/H₂O 44 mL/NH₄F 0.5 wt% electrolytes modified with H₂SO₄ and NaAc addition. The surface morphologies, average inner diameter, and the length of the nanotube arrays changed with the solution pH in the range from 5.6 to 4.0 by adding H₂SO₄. A uniform surface morphology of the nanotubes with average inner diameter of ∼80 nm and a length of ∼1000 nm was obtained when the solution pH was 5.0. The growth rates of the nanotubes were remarkably enhanced by NaAc addition in the range of 0.04–0.14 M . With NaAc addition of 0.10 M , the length of the nanotube arrays reached 4.16 μm after an 8-h anodization, increasing 3.23 μm compared with no NaAc addition. The relationship between solution pH and growth of TiO₂ nanotubes was analyzed by current–time curves, solution electrical conductivities, and scanning electron microscopy (SEM), and the role of NaAc was also discussed based on SEM and solution electrical conductivities.     

Relationship of hydrocarbon and source-rock in Nos.3-5 tectonic belts of the Lenghu area, northern Qaidam Basin

Based on analyses of the components of crude oil hydrocarbons and carbon isotopes, the content of normal alkane de-creased from 49.00% to 20.10% when moving from the No.3 to No.5 tectonic belt of the Lenghu area of the Qaidam Basin, while cycloalkanes increased from 30.00% to 52.20% and aromatic and branch chain alkanes increased gradually as well. The maturity of sterane in crude oil is higher than that of its source-rock, which shows that the hydrocarbons were generated from a deep source-rock of high maturity around the tectonic belts of the Lenghu area. The analysis of the characteristics of carbon isotopes also shows that these isotopes of hydrocarbon compounds in the No.4 and No.5 tectonic belt are apparently heavier than those in the No.3 belt. The results of our research show that the hydrocarbons in the No.3 tectonic belt are mainly from a relatively rich sapropelic substance, while the hydrocarbons in the No.4 and No.5 tectonic belt originated mainly from organic matter of a rela-tively rich humic type substance.     

M序列的对称性变换及对称群

n级M序列是由n级非线性回馈移位寄存器产生的周期为2n的二元序列,也称为de Bruijn序列。该文将讨论M序列的对称性变换,提出了一类新的对称性变换——"与/或"逻辑对称性变换,并研究了基于对称性变换的对称群。     

子矩阵约束下的反对称阵特征值反问题

矩阵的特征值反问题在结构设计、振动系统参数识别和自动控制等领域具有广泛应用。给出了子矩阵约束下反对称矩阵反问题解的一般表达式,并且给出了解的最佳逼近解。     

二氰基取代的四硫富瓦烯硫杂冠醚衍生物的合成及性质研究

在甲苯溶液中,在亚磷酸三乙酯存在下,采取高度稀释的方法,使4,5-二氰基-1,3-二硫杂环戊二烯-2-酮分别和多缩硫杂冠醚进行交叉偶联反应,成功地得到了不对称的2,3-二氰基四硫富瓦烯衍生物。用1HNMR、MSI、R和EA表征了其结构,并用循环伏安法研究了它们的电化学性质,用1HNMR初步评价了衍生物对钠离子的配合性能。     

MEMS陀螺仪的稀疏冗余去噪

为了提高随钻测量过程中MEMS陀螺仪的测量精度,抑制振动信号等对陀螺仪漂移造成测量精度的影响,采用经验模态分解(Empirical Mode Decomposition,EMD)和压缩感知(compressed sensing,CS)的算法进行降噪.首先对MEMS陀螺信号进行EMD分解,利用连续均方误差(CMSE)计算两个连续重构陀螺仪信号的欧式距离,以此将分解得到的模态函数(IMFs)以高、低频的形式分离,剔除高频噪声模态的影响;构建冗余字典,使低频IMFs分量在该字典上稀疏表示,利用贝叶斯理论对优化剩余IMFs分量重构;同时,在该字典上添加一列误差补偿项,通过贝叶斯估计求得.最后将处理后的剩余IMFs分量和补偿项叠加重构.去噪前后,MEMS陀螺仪数据解算的方位角累积误差由11.8562°减小到0.4725°.仿真实验分析可知,该算法可有效去除陀螺仪信号中的噪声.