化学镀非晶态Ni—B合金的研究

本文通过化学镀方法在铜和钢上沉积非晶态Ni-B合金。着重讨论了还原剂浓度、络合剂浓度对化学镀沉积速率的影响;分析了它的耐蚀原因和其显微硬度随退火温度的变化情况并就其应用和发展略作说明。     

JOINING MECHANISMS OF β''''-Al2O3 CERAMIC AND PYREX GLASS TO Al MATRIX COMPOSITE

The bonding of β'-Al2O3 and pyrex glass to Al matrix composites by anodic bonding process is achieved. The microstructure of the bonded interface and the joining mechanisms are analyzed with scanning electron microscope (SEM), energy dispersive X-ray fluorescence spectrometer (EDX). It is observed that the bonding region across the interface consists of the metal layer, oxide transitional layer and the ceramic layer, with the transitional layer composed of surface region and sub-surface region. The bonding process can mainly be categorized into anodic bonding process and solid state diffusing process. The pile-up of the ions and its drift in the interface area are the main reasons for anode oxidation and joining of the interface. The temperature, voltage and the drift ions in the ceramic or glass during the bonding process are the essential conditions to solid state diffusing and oxide bonding at the interface. The voltages, temperature, pressure as well as the surface state are the main factors that influence the anodic bonding.     

TFM调制及其改进技术的研究

通过对TFM调制技术的研究,修正了其中预调制滤波器冲击响应波形g(f)在时间轴上的位置及其频谱G(w)的表达式.然后将TFM基带信号进行近似,即对TFM的相位路径进行进一步的控制,得到一个改进的TFM调制技术.改进后的TFM调制技术和原TFM调制技术相比,频带压缩能力提高了一倍,误码性能不变,但会出现3 dB的寄生调幅,需要提高发射机的发射功率.     

爆轰试验用新型射频连接器的结构设计

针对目前爆轰试验中使用的机械密封射频连接器存在的问题.设计了基于玻璃封接技术的新型密封射频连接器结构,并进行了射频反射补偿计算和强度分析.本项研究为爆轰条件下新型密封射频连接器的研制提供了设计依据.     

复合聚全氟乙丙烯材料的介电及高频击穿性能研究

在聚全氟乙丙烯(FEP)中添加 TiO_2和 Al_2O_3,通过热压成型的方法制备了 FEP/TiO_2复合材料和 FEP/Al_2O_3复合材料,研究了氧化物添加量对复合材料介电常数、介电损耗和高频击穿性能的影响。结果表明,随氧化物含量的增加,复合材料的介电常数和介电损耗均增加;在同一添加量下,TiO_2对复合体系的介电性能影响较大。FEP/TiO_2复合材料的高频击穿性能随 TiO_2含量的增加而下降,在 TiO_2含量为4.0%(质量分数,下同)时,复合材料的损伤阈值已降为 FEP 材料损伤阈值的48.9 %。而 FEP/Al_2O_3复合材料的高频击穿性能随 Al_2O_3含量的增加而升高,当 Al_2O_3含量为1.2%时,复合材料的损伤阈值已增大到 FEP 材料损伤阈值的2倍,达到313 J/m~2。     

清华屏蔽实验反应堆中子注量率能谱的调节和测量

叙述了采用多种屏蔽过滤方法,通过实验获得多种条件下的中子注量率能谱的调节和测量。     

雷达仿真系统中电磁干扰环境的仿真设计和实施

雷达仿真系统是为检测雷达设备的抗干扰能力以及在各种电磁环境下的工作性能而设计的，包括有源干扰和无源干扰的模拟仿真。本文阐述了无源干扰即杂波的散射模型和仿真过程；从同步脉冲干扰的基本原理出发，阐明在雷达工作环境仿真系统中距离拖引、速度拖引、虚假目标等同步脉冲有源干扰的设计和实施过程；并针对工作在搜索和跟踪交替模式下的相控阵雷达提出自适应综合干扰方式；最后分析并总结了系统仿真时为真实、有效地模拟电磁干扰环境应注意的关键问题。     

光纤的淬冷增强原理

本文从拉丝工艺技术的角度出发，讨论了高速、高温拉丝工艺方法对光纤的淬冷增强原理。     

Penicilloyl peptides are recognized as T cell antigenic determinants in penicillin allergy

Although hapten immune responses have been intensively studied in the mouse, very little is known about hapten determinants involved in human allergic reactions. Penicillins, as chemically reactive compounds of low molecular weight, constitute typical examples of hapten allergens for humans. Penicillins become immunogenic only after covalent binding to carrier proteins and in this form frequently induced IgE-mediated allergic reactions in patients subjected to antibiotic treatment. However, our previous data strongly indicated that penicillins also form part of the epitopes contacting the antigen receptors of beta lactam-specific T cells in allergic individuals. We have therefore investigated the molecular constraints involved in the T cell immune response to penicillin G (Pen G). Designer peptides containing a DRB1*0401-binding motif and covalently modified with Pen G via a lysine epsilon-amino group were found to induce proliferation of Pen G-specific T cell clones. A precise positioning of the hapten molecule on the peptide backbone was required for optimal T cell recognition. Furthermore, we extended these observations from our designer peptides to show that a peptide sequence derived from a natural DRB1*1101-binding peptide modified in vitro with Pen G, also acquired antigenic properties. Our data for the first time provide insight into the manner in which allergenic haptens are recognized by human T cells involved in allergic reactions to drugs and suggest possible mechanisms leading to the onset of these adverse immune responses.