Net shape formation of sub-micron alumina with reduced flaws by high-speed centrifugal compaction process

A new compacting method for powder materials is presented. High-Speed Centrifugal Compaction Process (HCP) utilizes centrifugal force of about 10,000 g for the compaction. HCP is suitable for net shape compaction of fine sub-micron and nano-powders. HCP possesses a unique compacting mechanism that is different from other colloidal processes including Pressure Casting (PC), and has a number of useful characteristics. HCP has a higher compacting speed than PC, wide applicability for net shape formation, as well as a defect removing function. Because of homogeneous and flawless green microstructure, HCP alumina shows superior sinterability and higher strength and hardness than most of other aluminas. This article is based on a presentation made in the symposium “The 3rd KIM-JIM Joint Symposium on Advanced Powder Materials“, held at Korea University, Seoul, Korea, October 26–27, 2001 under auspices of The Korean Institute of Metals and Materials and The Japan Institute of Metals.     

Lysozyme requires fluctuation of the active site for the manifestation of activity

Mutations around His15 which lie far away from the active site,stimulated glycol chitin activity of lysozyme at physiologicaltemperature. Del-Argl4Hisl5 lysozyme, a mutant lysozyme whoseArgl4 and Hisl5 were deleted together, and has the highest activityamong these mutant lysozymes, had a similar binding abilityto a trimer of N-acetyl-glucosamine, a substrate analogue, relativeto native lysozyme. This suggests that the increased activitywas due to an increased k_cat in the catalysis reaction. TheH-D exchange rate of the N-1 proton in the Trp63 which is locatedin the active site cleft, was enhanced in the Del-Argl4Hisl5lysozyme, while 2-D proton NMR analysis revealed no conformationalchange around Trp63. We conclude that some sort of fluctuationat the active site might be required for the manifestation ofactivity. This theory is supported by the finding that the Del-Argl4Hisl5lysozyme showed a shift in temperature dependency of activityto lower temperatures compared with that of native lysozyme.     

Effective renaturation of reduced lysozyme by gentle removal of urea

To increase the folding yield of concentrated reduced lysozyme,we developed a renaturation method by means of dialysis fromconcentrated urea with redox agents. After lysozyme was incubatedin the reducing buffer (8 M urea solution) with oxidized glutathione,renaturation of reduced lysozyme was started by dialysis againstthe dialyzing buffer containing 8 M urea with redox agents.The urea concentration of the dialyzing bottle was graduallydiluted with dialyzing buffer without urea at a flow rate of0.1 ml/min by high pressure pump. Using this systematic dialysis,a concentration as high as 5 mg/ml of reduced lysozyme couldbe renaturated in 80% yield, while the folding yield was <5%even at a concentration of 1 mg/ml using a conventional rapiddilution method [Goldberg et al. (1991) Biochemistry, 30, 2790–2797].Therefore, it was concluded that gentle removal of urea fromdenatured proteins, dissolved in concentrated urea solution,by means of dialysis should be useful to renature denaturedproteins effectively.     

Effect of temperature on humido-sensitive conducting polymer actuators

Temperature dependence of water vapor sorption and electro-active polymer actuating behavior of free-standing films made of poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate) (PEDOT/PSS) was investigated by means of sorption isotherm and electromechanical analyses. The non-porous PEDOT/PSS film, having a specific surface area of 0.13 m² g^?1, sorbed water vapor of 1080 cm³(STP) g^?1, corresponding to 87 wt%, at relative water vapor pressure of 0.95. A temperature rise from 25 °C to 40 °C lowered sorption degree, indicative of an exothermic process, where isosteric heat of sorption decreased with increasing water vapor sorption and the value reached 43.9 kJ mol^?1, being consistent with the heat of water condensation (44 kJ mol^?1). Upon application of 10 V, the film underwent contraction of 2.46% at 5 °C caused by desorption of water vapor due to Joule heating, which slightly decreased to 2.10% at 45 °C. The speed of contraction was one order of magnitude faster than that of expansion and less dependent on the temperature since water vapor sorbed in the film were forced to desorb by Joule heating. In contrast, the higher the temperature the faster the film expansion because diffusion coefficient increased as the temperature became higher.     

Wide-gap layered oxychalcogenide semiconductors: Materials, electronic structures and optoelectronic properties

Applying the concept of materials design for transparent conductive oxides to layered oxychalcogenides, several p-type and n-type layered oxychalcogenides were proposed as wide-gap semiconductors and their basic optical and electrical properties were examined. The layered oxychalcogenides are composed of ionic oxide layers and covalent chalcogenide layers, which bring wide-gap and conductive properties to these materials, respectively. The electronic structures of the materials were examined by normal/inverse photoemission spectroscopy and energy band calculations. The results of the examinations suggested that these materials possess unique features more than simple wide-gap semiconductors. Namely, the layered oxychalcogenides are considered to be extremely thin quantum wells composed of the oxide and chalcogenide layers or 2D chalcogenide crystals/molecules embedded in an oxide matrix. Observation of step-like absorption edges, large band gap energy and large exciton binding energy demonstrated these features originating from 2D density of states and quantum size effects in these layered materials.     

Irradiation properties of T0 chopper components

We investigated the irradiation properties of the components of a T0 chopper. The organic materials in the rotor bearing grease, the magnetic fluids in seals, and the rubber in the timing belt, as well as the semiconductor materials in the rotation sensor and motor encoder, were all irradiated with high-energy γ-rays up to 100 kGy. No significant damage that shortens the lifetime of a T0 chopper was observed for the mechanical components. However, the semiconductor components were damaged by the irradiation. For the rotation sensor system detecting the rotor phase, the signal from a marker on the rotor shaft was transmitted outside the shielding by an optical fiber with radiation-proofing and the electrical circuits were removed from the beamline shielding. The lifetime of the motor encoder possibly meets the requirement for the maintenance period of the T0 chopper.     

Disturbance rejection with information constraints: Performance limitations of a scalar system for bounded and Gaussian disturbances

This paper derives performance limitations for disturbance rejection of scalar systems under information constraints subject to either bounded or Gaussian disturbances. Two kinds of disturbance are treated in a unified manner, using appropriate entropies and distortions. It is shown that the achievable performance cannot be improved even if the maximum information constraint is relaxed to an average information constraint. Another observation is that, while the information constraints are weaker than bit-rate or signal-to-noise ratio constraints on the communication channel, the same performance levels are achieved by the best encoder and decoder for disturbance rejection with the information constraints.     

An experimental study on self-output-control characteristics of micro downwind rotor with coning soft blades

In this short paper,we have treated the aerodynamic performance of micro downwind rotor with coning soft blades experimentally.The test wind rotor has the tip diameter of 1.5 m and three two-dimensional NACA0018 blades of 0.15 m chord whose material is light,soft and pliable foam plastic for perfect safety.From the wind tunnel test,it is realized that the performance is manageable by the coning angle of the rotor blade.In the present case,an improvement of the performance in lower wind speeds is achieved by...