Theory and use of the pseudophase model in gas-liquid chromatographic enantiomeric separations

The theory and use of the "three-phase" model in enantioselective gas-liquid chromatography utilizing a methylated cyclodextrin/polysiloxane stationary phase is presented for the first time. Equations are derived that account for all three partition equilibria in the system, including partitioning between the gas mobile phase and both stationary-phase components and the analyte equilibrium between the polysiloxane and cyclodextrin pseudophase. The separation of the retention contributions from the achiral and chiral parts of the stationary phase can be easily accomplished. Also, it allows the direct examination of the two contributions to enantioselctivity, i.e., that which occurs completely in the liquid stationary phase versus the direct transfer of the chiral analyte in the gas phase to the dissolved chiral selector. Six compounds were studied to verify the model: 1-phenylethanol, alpha-ionone, 3-methyl-1-indanone, o-(chloromethyl)phenyl sulfoxide, o-(bromomethyl)phenyl sulfoxide, and ethyl p-tolylsulfonate. Generally, the cyclodextrin component of the stationary phase contributes to retention more than the bulk liquid polysiloxane. This may be an important requirement for effective GC chiral stationary phases. In addition, the roles of enthalpy and entropy toward enantiorecognition by this stationary phase were examined. While enantiomeric differences in both enthalpy and entropy provide chiral discrimination, the contribution of entropy appears to be more significant in this regard. The three-phase model may be applied to any gas-liquid chromatography stationary phase involving a pseudophase.     

Building simulation: Ten challenges

Buildings consume more than one-third of the world’s primary energy. Reducing energy use and greenhouse-gas emissions in the buildings sector through energy conservation and efficiency improvements constitutes a key strategy for achieving global energy and environmental goals. Building performance simulation has been increasingly used as a tool for designing, operating and retrofitting buildings to save energy and utility costs. However, opportunities remain for researchers, software developers, practitioners and policymakers to maximize the value of building performance simulation in the design and operation of low energy buildings and communities that leverage interdisciplinary approaches to integrate humans, buildings, and the power grid at a large scale. This paper presents ten challenges that highlight some of the most important issues in building performance simulation, covering the full building life cycle and a wide range of modeling scales. The formulation and discussion of each challenge aims to provide insights into the state-of-the-art and future research opportunities for each topic, and to inspire new questions from young researchers in this field.     

Comparison of PCR and quantitative real-time PCR methods for the characterization of ruminant and cattle fecal pollution sources

The State of California has mandated the preparation of a guidance document on the application of fecal source identification methods for recreational water quality management. California contains the fifth highest population of cattle in the United States, making the inclusion of cow-associated methods a logical choice. Because the performance of these methods has been shown to change based on geography and/or local animal feeding practices, laboratory comparisons are needed to determine which assays are best suited for implementation. We describe the performance characterization of two end-point PCR assays (CF128 and CF193) and five real-time quantitative PCR (qPCR) assays (Rum2Bac, BacR, BacCow, CowM2, and CowM3) reported to be associated with either ruminant or cattle feces. Each assay was tested against a blinded set of 38 reference challenge filters (19 duplicate samples) containing fecal pollution from 12 different sources suspected to impact water quality. The abundance of each host-associated genetic marker was measured for qPCR-based assays in both target and non-target animals and compared to quantities of total DNA mass, wet mass of fecal material, as well as Bacteroidales, and enterococci determined by 16S rRNA qPCR and culture-based approaches (enterococci only). Ruminant- and cow-associated genetic markers were detected in all filters containing a cattle fecal source. However, some assays cross-reacted with non-target pollution sources. A large amount of variability was evident across laboratories when protocols were not fixed suggesting that protocol standardization will be necessary for widespread implementation. Finally, performance metrics indicate that the cattle-associated CowM2 qPCR method combined with either the BacR or Rum2Bac ruminant-associated methods are most suitable for implementation.     

Performance evaluation of canine-associated Bacteroidales assays in a multi-laboratory comparison study

The contribution of fecal pollution from dogs in urbanized areas can be significant and is an often underestimated problem. Microbial source tracking methods (MST) utilizing quantitative PCR of dog-associated gene sequences encoding 16S rRNA of Bacteroidales are a useful tool to estimate these contributions. However, data about the performance of available assays are scarce. The results of a multi-laboratory study testing two assays for the determination of dog-associated Bacteroidales (DogBact and BacCan-UCD) on 64 single and mixed fecal source samples created from pooled fecal samples collected in California are presented here. Standardization of qPCR data treatment lowered inter-laboratory variability of sensitivity and specificity results. Both assays exhibited 100% sensitivity. Normalization methods are presented that eliminated random and confirmed non-target responses. The combination of standardized qPCR data treatment, use of normalization via a non-target specific Bacteroidales assay (GenBac3), and application of threshold criteria improved the calculated specificity significantly for both assays. Such measures would reasonably improve MST data interpretation not only for canine-associated assays, but for all qPCR assays used in identifying and monitoring fecal pollution in the environment.     

Magnetic quadrupole doublet focusing system for high energy ions

A high energy focused ion beam microprobe using a doublet arrangement of short magnetic quadrupole lenses was used to focus 1-3 MeV protons to spot sizes of 1x1 microm2 and 1-4.5 MeV carbon and silicon ion beams to spot sizes of 1.5x1.5 microm2. The results presented clearly demonstrate that this simple doublet configuration can provide high energy microbeams for microanalysis and microfabrication applications.     

Investigation of the 2D assumption in the image‐based inertial impact test

The image‐based inertial impact (IBII) test has shown promise for measuring properties of composites at strain rates where existing test methods become unreliable due to inertial effects (> 10² s^?1 ). Typically, the IBII tests are performed with a single camera, and therefore, to use surface measurements for material property identification, it is necessary to assume that the test is two‐dimensional. In this work, synchronised ultra‐high‐speed cameras are used to quantify the relevance of this assumption when nonuniform, through‐the‐thickness loading is applied to interlaminar samples. Initial experiments revealed that an angular misalignment of approximately 1° between the impact faces of the waveguide and projectile created a bending wave that propagated along the sample behind the axial pulse. Even under these conditions, consistent measurements of stiffness were made by assuming a linear distribution of the behaviour through‐the‐thickness. When the misalignment was reduced to 0.2°, the effects on single‐sided measurements were significantly reduced. The two alignment cases were compared to show that three‐dimensional loading had a small effect on stiffness identification (approximately 5% bias) relative to failure stress (approximately 30% bias). This study highlights the importance of impact alignment for reliable characterisation of the interlaminar failure stress and was used to establish guidelines for diagnosing loading issues from single‐sided measurements.     

Infrared multiphoton dissociation with a hollow fiber waveguide

A novel scheme for performing infrared multiphoton dissociation (IRMPD) is presented in which a hollow fiber waveguide (HFWG) is used to transmit IR radiation into the ion storage region of a mass spectrometer. Efficient dissociation of oligonucleotide and protein ions is demonstrated on an ESI-FTICR instrument in which IRMPD is performed in the external ion reservoir and on a quadrupole ion trap. Using a simple optical scheme consisting of a single focusing lens and an x, y translator, the 10.6-microm IR laser beam, initially 3.5 mm in diameter, is focused into the vacuum-sealed HFWG. The small internal diameter and the high transfer efficiency of the waveguide allow IR radiation of high power density to be employed for IRMPD. In studies performed on a quadrupole ion trap, a 500-microm-i.d. waveguide was used as a medium to transmit IR radiation directly through a 700-microm orifice in the ring electrode. Efficient IRMPD of both a 12-mer oligonucleotide and the protein melittin were performed at laser powers of 0.5 and 3.2 W, respectively.     

Selective ion filtering by digital thresholding: a method to unwind complex ESI-mass spectra and eliminate signals from low molecular weight chemical noise

In this work, we present a simple method by which to preferentially detect either high molecular weight or low molecular weight ions generated by electrospray ionization. This approach, termed selective ion filtering by digital thresholding (SIFdT) is demonstrated on a commercial ESI-TOF instrument that employs a fast digitizer coupled to a microchannel plate detector. The digital representation of each individual scan is digitally filtered prior to spectral coaddition. As larger, more highly charged ions induce a more intense response than low molecular weight singly charged species, a digital threshold can be set that precludes the detection of singly charged species yet permits the efficient detection of larger, more highly charged species. In this work, we demonstrate the applicability of this approach to eliminate low molecular weight chemical noise in ESI-TOF spectra of oligonucleotide and protein ions, demonstrate improved dynamic range for analyte solutions containing high levels of low MW constituents, and show that spectra acquired at different digital thresholds can be subtracted to yield spectra of low molecular weight constituents with improved mass measurement accuracies. A notional scheme is presented in which an alternative digitization approach is employed using multiple differentially thresholded data streams to allow improved internal mass calibration and higher resolution ion partitioning.     

Label-free impedimetric detection of glycan-lectin interactions

A compact biosensor for a label-free, rapid (<80 s) detection of glycan-lectin interactions using ac impedance measurements was developed for the first time. A galactose-binding peanut agglutinin (PNA) and sialic acid-binding Sambucus nigra agglutinin (SNA) were covalently surface-immobilized on the layered Cu/Ni/Au printed circuit board (PCB) electrodes. Samples of artificial and natural glycoconjugates consisting of (1) gold glyconanoparticles encapsulated with approximately 90-100 copies of TF-antigen disaccharide Galalpha1-3GalNAc (TF-AuNP), (2) asialofetuin (ASF) containing both LacNAc (Galbeta1-4GlcNAc) and TF-antigen, and (3) fetuin (FET), the sialylated glycoform of ASF. The samples were run separately on PNA- and SNA-immobilized PCB electrodes. Our results indicate that TF-AuNP could be rapidly and reliably detected up to 1 pg/mL (13 fM) concentration on PNA electrode but, as expected, yielded no response on the SNA electrode. ASF and FET glycocoproteins were unambiguously detectable up to 10 pg/mL (150 fM) on PNA and SNA electrodes, respectively. Moreover, the technique allowed us to observe glyco-microheterogeneity of FET as well as establish the presence of two isoforms of SNA lectin, SNA-I and SNA-II, in one of the vendor's formulations. Further elaboration of the described technology into novel electrochemically driven lectin arrays may find applications in diagnosis of cancer and other diseases with multiple glycobiomarkers or as a rapid low-cost bioanalytical tool for glycoproteome analyses.