Establishment time of liquid flow in a bath agitated by bottom gas injection

The establishment time of gas-liquid two-phase flows in a cylindrical bath agitated by bottom gas injection through a central single-hole bottom nozzle was investigated. Because the turbulence intensity in the bath was comparable to or larger than the unity, the conventional definition of the flow establishment time based on the history of mean velocity was not suitable for the present case. In fact, it was difficult to determine the flow establishment time based on the well-known 90 or 99 pct criterion for the mean velocity. Accordingly, two methods of determining the flow establishment time by focusing on the turbulence components instead of the mean velocity components were proposed. Velocity measurements were made with a two-channel laser Doppler velocimeter. The flow establishment time was correlated as a function of gas flow rate. Close agreement was obtained by the two methods.     

Stabilization of bioethanol recovery with silicone rubber‐coated ethanol‐permselective silicalite membranes by controlling the pH of acidic feed solution

In order to produce highly concentrated bioethanol by pervaporation using an ethanol‐permselective silicalite membrane, techniques to suppress adsorption of succinic acid, which is a chief by‐product of ethanol fermentation and causes the deterioration in pervaporation performance, onto the silicalite crystals was investigated. The amount adsorbed increased as the pH of the aqueous succinic acid solution decreased. The pervaporation performance also decreased with decreasing pH when the ternary mixtures of ethanol/water/succinic acid were separated. Using silicalite membranes individually coated with two types of silicone rubber, pervaporation performance was significantly improved in the pH range of 5 to 7, when compared with that of non‐coated silicalite membranes in ternary mixtures of ethanol/water/succinic acid. Moreover, when using a silicalite membrane double‐coated with the two types of silicone rubber, pervaporation performance was stabilized at lower pH values. In the separation of bioethanol by pervaporation using the double‐coated silicalite membrane, removal of accumulated substances having an ultraviolet absorption maximum at approximately 260 nm from the fermentation broth proved to be vital for efficient pervaporation. Copyright © 2005 Society of Chemical Industry     

Syntheses and structural properties of four Rb-aluminosilicate zeolites

Four types of Rb-aluminosilicate zeolites were hydrothermally synthesized in pure phase for the first time from Rb-aluminosilicate gels without using any organic structure-directing agent (SDA) under stirring conditions. The crystal structure of each zeolite was refined by Rietveld analysis of the X-ray diffraction (XRD) data. These crystal structures were confirmed to be Rb-mordenite, Rb-merlinoite, a new aluminosilicate zeolite with an ATT framework topology, and Rb-offretite denoted by RMA-1, RMA-2, RMA-3, and RMA-4, respectively. The Si/Al ratio of RMA-1 with an MOR topology varied from 5.3 to 8.0; however, the variation of the Si/Al ratios of the other zeolites was rather small. The crystal system of RMA-2 was tetragonal with space group I4/mmm, where two Rb sites were distributed at the center of an 8-membered ring (MR). On the other hand, two Rb sites in RMA-3 were located at the center of the 8-MR in small two cages. The structure of RMA-4 was identified as the OFF type with a local disorder or defect, which included a small amount of an intergrown ERI phase.     

Development of large-scale stacked-type electrostatic actuators for use as artificial muscles

Electrostatic actuators have the advantages of light weight, flexibility, and high energy efficiency, which make them suitable for use as artificial muscles. However, a traditional electrostatic actuator cannot generate long strokes and a high force density at the same time because such actuator would excessively widen the gap between the electrodes because of its structure. This paper presents a newly developed large-scale stacked-type electrostatic actuator (LSEA) intended for use as an artificial muscle for robots. LSEA is a multi-stacked electrostatic actuator that can be linearly contracted by the application of a voltage. It has a unique structure that prevents overextension of the gap between the electrodes. It can therefore generate a large force. The spring characteristics and the relationship between the contractive force and the stroke were experimentally determined. The findings showed that LSEA prevents the overextension of the gap between the electrodes and has a high contraction ratio that is equivalent to that of a mammalian skeletal muscle.     

Semiconductor Passivation and Insulation Properties for Hydroxyl- and Fluoride-Free ZnO-SiO2-B2O3-Al2O3 Glasses Stabilized by Increased P2O5

F⁻- and OH⁻-free ZnO-B₂O₃-SiO₂-Al₂O₃-P₂O₅ glasses used for semiconductor-device passivation or insulation are investigated with regard to compositional dependencies for thermal expansion, viscosity points, and metal oxide semiconductor (MOS) capacitor properties. The experimental data show that thermal expansion increases, and flow points decrease, when P₂O₅ is substituted for B₂O₃. MOS capacitors passivated by OH⁻- and F⁻-free ZnO-based glasses exhibit normal capacitance-voltage curves.     

Temperature-controlled molecular dynamics study on velocity-dependent threshold behavior of dynamic nano-friction

Laws of dynamic nano-friction (i.e., continuous wearless friction) were searched for under steady spatial distributions of the local quasi-temperature, by molecular dynamics (MD) simulations. The temperature control of the non-conservative model was carried out by extending the isothermal MD method using the Nosé–Poincaré thermostat. The results suggested that the threshold phenomenon characterizes sliding-velocity dependence of the nano-frictional force between crystal lattices constituting a nano-electromechanical system (NEMS). This phenomenon was turned out to be a universal feature, whether heat transfer to the environment exists or not.     

A Face Identification System Based on the Mahalanobis–Taguchi System

In this paper, we propose a face identification system based on the Mahalanobis–Taguchi System (MTS). The MTS is one of the pattern recognition methods frequently used in quality engineering, and can perform robust pattern recognition by using training data, including noise. It is likely that this advantage will allow the effective implementation of a robust face identification system against lighting and face position fluctuations. Moreover, the MTS can optimize the number of attributes required for identification by using the orthogonal array and the signal/noise (SN) ratio. The face identification system has to deal with many users and the amount of data in a facial image is large. Therefore, the time required for identification can be decreased and the amount of data in the facial image database can be reduced by performing the optimization. We confirmed the effectiveness of the proposed system through practical experiments. The experimental results revealed that the MTS was an effective method for robust face identification, and could effectively reduce the number of attributes required for identification.     

Electrical and structural properties of ortho-chloranil doped zinc phthalocyanine films

Electrical conductivity of evaporated zinc phthalocyanine (ZnPc) films, doped with orthochloranil (o-CA) molecules, is investigated. Benzoico-CA solution is introduced in the film and benzene is removed by vapourization afterwards. The film conductivity at first increased and then decreased with incremental doping. The maximum conductivity of the sample appeared at doping level × (=o-CA/ZnPc) 0.2 and is about 10³ times as large as that of the as-evaporated one. About a ten-fold further increase in the conductivity is obtained by the heat-treatment of 150 °C for 12 h. The conductivity change by doping is explained by taking into account thato-CA molecules behave not only as acceptors in the film but destructively for the film structure. The phase change of ZnPc by benzoic solution is also discussed.