Geometric origin of pair production by electric field in de sitter space

Particle production in de Sitter space provides an interesting model for understanding the curvature effect on Schwinger pair production by a constant electric field or the Schwinger mechanism on de Sitter radiation. For that purpose, we employ the recently introduced complex analysis method in which the quantum evolution in complex time explains pair production via the geometric transition amplitude and gives the pair-production rate as a contour integral. We compare the result from the contour integral with that of the phase-integral method.     

Comparative evaluation of performance measures for human driving skills

In this paper, we evaluate the adequacy of several performance measures for the evaluation of driving skills between different drivers. This work was motivated by the need for a training system that captures the driving skills of an expert driver and transfers the skills to novice drivers using a haptic-enabled driving simulator. The performance measures examined include traditional task performance measures, e.g., the mean position error, and a stochastic distance between a pair of hidden Markov models (HMMs), each of which is trained for an individual driver. The emphasis of the latter is on the differences between the stochastic somatosensory processes of human driving skills. For the evaluation, we developed a driving simulator and carried out an experiment that collected the driving data of an expert driver whose data were used as a reference for comparison and of many other subjects. The performance measures were computed from the experimental data, and they were compared to each other. We also collected the subjective judgement scores of the driver’s skills made by a highly-experienced external evaluator, and these subjective scores were compared with the objective performance measures. Analysis results showed that the HMM-based distance metric had a moderately high correlation between the subjective scores and it was also consistent with the other task performance measures, indicating the adequacy of the HMM-based metric as an objective performance measure for driving skill learning. The findings of this work can contribute to developing a driving simulator for training with an objective assessment function of driving skills.     

Discrimination of visual and haptic rendering delays in networked environments

Many networked human-machine interface systems have a distributed structure for certain purposes such as more computational power, tele-presence, collaboration, and portability. However, network delays are inevitable in the distributed structure, and often make sensory information delivered behind time to the user. In the literature, the effect of network delays on the quality of information presentation has been considered with respect to task performances in most cases. In this paper, we pay attention to a more stringent criterion, namely whether perceptual artifacts caused by network delays are perceptible by the user. We examined minimum perceptible visual and/or haptic rendering delays by measuring their discrimination thresholds between normal and delayed virtual environments with and without a task, and report the results in this paper. We also provide a simple guideline for determining whether active delay compensation algorithms are required in a networked human-machine interface system by comparing representative network delays to the measured discrimination thresholds. Recommended by Guest Editor Phill Kyu Rhee. This work was supported in parts by a grant R01-2006-000-10808-0 and a NRL grant R0A-2008-000-20087-0 both from KOSEF and by a ITRC support program C1090-0804-0002 from IITA, all funded by the Korea government. In Lee is a Ph.D student in Computer Science and Engineering at POSTECH, of Korea. He received the B.S. degree in Information and Communication Engineering from Sungkyunkwan University in 2006. His research interests include haptics, virtual reality, and human-computer interaction. Seungmoon Choi is an Assistant Professor in Computer Science and engineering at POSTECH, Korea. He received the B.S. and M.S. degrees in Control and Instrumentation Engineering from Seoul National University in 1995 and 1997, respectively, and the Ph.D. degree in Electrical and Computer Engineering from Purdue University in 2003. His research areas include haptics, virtual reality, data perceptualization, and applied perception.     

A Study on the Pd/a-Si/Ni Seed Layer for Metal-Induced Lateral Crystallization and Poly-Si TFTs

The effect of Pd on the growth rate of metal-induced lateral crystallization (MILC) from Ni seed and the electrical properties of thin-film transistors (TFTs) fabricated on the films crystallized by MILC were investigated. When the Pd metal is placed on the amorphous-silicon/Ni-seed layer, the MILC growth rate is two to three times faster than that of conventional Ni-MILC, without any degradation of TFTs. These results were explained by a stress that is generated by the formation of Pd₂Si     

Leak behavior of SCC degraded steam generator tubings of nuclear power plant

A forced outage due to a steam generator tube leak in a Korean nuclear power plant has been reported [Kim, J.S., Hwang, S.S., et al., 1999. KAERI Internal Report (Korean). Destructive analysis on pulled tubes from Ulchin unit 1. Korea Atomic Energy Research Institute]. Primary water stress corrosion cracking has occurred in many tubes in the plant, and they were repaired using sleeves or plugs. In order to develop proper repair criteria, it is necessary to understand the leak behavior of the tubes containing stress corrosion cracks. Cracked specimens were prepared using a room temperature cracking technique, and the leak rates and burst pressures of the degraded tubes were determined both at room temperature and at a high temperature. Some tubes with 100% through wall cracks did not show a leakage at 10.8 MPa, which is the typical pressure difference of the pressurized water reactors (PWRs) during a normal operation. In some tests, the leak rates of the tubes increased with time at a constant pressure. In a high temperature pressure test at 282 °C one specimen showed a very small leakage at 18.6 MPa, which stopped after a small increase in the test pressure. Because stress corrosion cracks can develop at relatively low stresses, even 100% through wall cracks can be so tight that they will not leak at a normal operating pressure.     

Microstructural analysis of multilayered titanium aluminide sheets fabricated by hot rolling and heat treatment

This study is concerned with the microstructural analysis of multilayered or bulk Ti aluminide sheets fabricated by the self-propagating high-temperature synthesis (SHS) reaction using hot rolling and heat treatment. Multilayered Ti/Al sheets were prepared by stacking thin Ti and Al sheets alternately, and a good Ti/Al interfacial bonding was achieved after rolling at 500 °C. When these sheets were held at 1000 °C, spheroidal TiAl₃ phases were formed by the SHS reaction at Ti/Al interfaces and inside Al layers. Microstructural analysis on the hot-rolled, multilayered Ti/TiAl₃ sheets revealed that intermetallic phases such as TiAl₂, TiAl, and Ti₃Al were formed at Ti/TiAl₃ interfaces due to interaction between Ti and TiAl₃ and that pores formed in the TiAl₃ layer were significantly reduced during hot rolling. When multilayered Ti/Ti aluminide sheets were heat treated at 1000 °C, Ti₃Al, TiAl, and TiAl₂ were grown as Ti and TiAl₃ were consumed. As the heat treatment proceeded, TiAl grew further, eventually leading to the fabrication of multilayered sheets composed of Ti₃Al and TiAl. Bulk Ti aluminide sheets, having a lamellar structure of Ti₃Al and TiAl, instead of multilayered sheets, were also fabricated successfully by heat treatment at 1400 °C. This fabrication method of the bulk sheets had several advantages over the method by hot forging or rolling of conventional cast Ti aluminides. From these findings, an idea to fabricate multilayered or bulk Ti aluminide sheets by hot rolling and heat treatment is suggested as an economical and continuous fabrication method, and the formation and growth mechanisms of interfacial phases are elucidated in this study.     

Investigation of organic n-type field-effect transistor performance on the polymeric gate dielectrics

We report a copper hexadecafluorophthalocyanine (F₁₆CuPc) based n-type organic field-effect transistor (OFET) with polymeric gate dielectrics with different physical/electrical properties. The gate dielectrics are four types of cross-linked poly(4-vinylphenol) and newly prepared poly(4-phenoxy methyl styrene) and those are characterized based on surface tension, leakage current and capacitance. The performance of F₁₆CuPc OFETs with those gate dielectrics was compared. We found that the composition of the gate dielectrics and the interfacial interaction of F₁₆CuPc with the gate dielectric play a decisive role in the performance of OFETs. The effect of physical/electrical properties, composition and processing condition of the gate dielectrics on the device performance was investigated.     

Fabrication of Al matrix composite reinforced with submicrometer-sized Al<Subscript>2</Subscript>O<Subscript>3</Subscript> particles formed by combustion reaction between HEMM Al and V<Subscript>2</Subscript>O<Subscript>5</Subscript> composite particles during sintering

To fabricate an Al-V matrix composite reinforced with submicron-sized Al₂O₃ and Al_xV_y (Al₃V, Al₁₀V) phases, high energy mechanical milling (HEMM) and sintering were employed. By increasing the milling time, the size of mechanically milled powder was significantly reduced. In this study, the average powder size of 59 μm for Al, and 178 μm for V₂O₅ decreased with the formation of a new product, Al-Al₂O₃-Al_xV_y, with a size range from 1.3 μm to 2.6 μm formed by the in-situ combustion reaction during sintering of HEM milled Al and V₂O₅ composite powders. The in-situ reaction between Al and V₂O₅ during the HEMM and sintering transformed the Al₂O₃ and Al_xV_y (Al₃V, Al₁₀V) phases. Most of the reduced V reacted with excess the Al to form Al_xV_y (Al₃V, Al₁₀V) with very little V dissolved into Al matrix. By increasing the milling time and weight percentage of V₂O₅, the hardness of the Al-Al₂O₃-Al_xV_y composite sintered at 1173 K increased. The composite fabricated with the HEMM Al-20wt.%V₂O₅ composite powder and sintering at 1173 K for 2 h had the highest hardness.     

Monascus-fermented grain vinegar enhances glucose homeostasis through the IRS-1/PI3K/Akt and AMPK signaling pathways in HepG2 cell and db/db mice

Food Science and Biotechnology - MV was reported to have beneficial effects in ameliorating insulin resistance in db/db mice, but the intrinsic mechanisms for glucose homeostasis are unclear. This...