Stabilization of bioethanol recovery with silicone rubber‐coated ethanol‐permselective silicalite membranes by controlling the pH of acidic feed solution

In order to produce highly concentrated bioethanol by pervaporation using an ethanol‐permselective silicalite membrane, techniques to suppress adsorption of succinic acid, which is a chief by‐product of ethanol fermentation and causes the deterioration in pervaporation performance, onto the silicalite crystals was investigated. The amount adsorbed increased as the pH of the aqueous succinic acid solution decreased. The pervaporation performance also decreased with decreasing pH when the ternary mixtures of ethanol/water/succinic acid were separated. Using silicalite membranes individually coated with two types of silicone rubber, pervaporation performance was significantly improved in the pH range of 5 to 7, when compared with that of non‐coated silicalite membranes in ternary mixtures of ethanol/water/succinic acid. Moreover, when using a silicalite membrane double‐coated with the two types of silicone rubber, pervaporation performance was stabilized at lower pH values. In the separation of bioethanol by pervaporation using the double‐coated silicalite membrane, removal of accumulated substances having an ultraviolet absorption maximum at approximately 260 nm from the fermentation broth proved to be vital for efficient pervaporation. Copyright © 2005 Society of Chemical Industry     

Solution‐Processed Silicane Field‐Effect Transistor: Operation Due to Stacking Defects on the Channel

2D silicon nanomaterials have unique potential for use in applications owing to their many different exotic electronic properties. Field‐effect transistors are fabricated based on free‐standing silicanes through a solution process. Owing to the sensitive surface and the nanometer thickness, the devices require the use of fabrication conditions similar to those of lithium‐ion batteries to prevent oxidation of the sheets. Reliable transistor performance is observed at room temperature in a channel thinner than 3 nm, as drain voltage dependent transfer curves current modulation, depending on the edge effect of the silicane, although the transistor property is modest (hole mobility of 1.8 cm² V^?1 s^?1). The results suggest the feasibility of other air‐sensitive 2D nanomaterials for applications in nanoelectronic devices.     

Principal Component Clustered Factors for Determining Study Performance in Computer Programming Class

Wireless Personal Communications - Studying computer programming requires not only an understanding of theories and concepts, but also coding pragmatism. Success in studying or conducting such a...     

Teleoperation via computer network

In a teleoperation system, providing force information to a human operator can improve task performance. When a communication block between a master and a slave has a transmission delay, the system is easily destabilized. Anderson and Spong guaranteed passivity in the communication block by using scattering transformation and overcame this instability caused by the time delay. But this method can be applied to the communication block with a constant time delay. In a traditional teleoperation system, its communication block has a constant time delay. But time delay irregularly changes in a computer network because many users share telecommunication lines. This paper shows that the variable time delay destabilizes bilateral master-slave manipulator with scattering transformation and a new compensation method which keeps the time delay constant. This new compensation method has been implemented in a single-axis master-slave manipulator.     

Optical Nanoscale Pool‐on‐Surface Design for Control Sensing Recognition of Multiple Cations

General design of optical chemical nanosensors is needed to develop efficient sensing systems with high flexibility, and low capital cost for control recognition of toxic analytes. Here, we designed optical chemical nanosensors for simple, high‐speed detection of multiple toxic metal ions. The systematic design of the nanosensors was based on densely patterned chromophores with intrinsic mobility, namely, “building‐blocks” onto three‐dimensional (3D) nanoscale structures. The ability to precisely modify the nanoscale pore surfaces by using a broad range of chromophores that have different molecular sizes and characteristics enables detection of multiple toxic ions. A key feature of this building‐blocks design strategy is that the surface functionality and good adsorption characteristics of the fabricated nanosensor arrays enabled the development of “pool‐on‐surface” sensing systems in which high flux of the metal analytes across the probe molecules was achieved without significant kinetic hindrance. Such a sensing design enabled sensitive recognition of metal ions up to sub‐picomolar detection limits (～10^?11 mol dm^?3), for first time, with rapid response time within few seconds. Moreover, because these sensing pools exhibited long‐term stability, reversibility and selectivity in detecting most pollutant cations, for example, Cr(VI), Pb(II), Co(II), and Pd(II) ions, they are practical and inexpensive. The key result in our study is that the pool‐on‐surface design for optical nanosensors exhibited significant ion‐selective ability of these target ions from environmental samples and waste disposals.     

Numerical prediction of fraction of eutectic phase in Sn−Ag−Cu soldring using the phase-field method

A combination of macroscale solidification simulation and phase-field calculation is employed to predict the volume fraction of the eutectic phase in Sn-4.0 mass% Ag-XCu solder alloys (X=0.5–1.1 mass%). The solidification simulation incorporates the cooling rate in the phase-field simulation. We assume the residual liquid solidifies as eutectic phase when the driving force for the nucleation of Cu₆Sn₅ amounts to a critical value, which is determined based on the experimental data. Though the calculation results depend on the experimental data, the obtained fractions are about 40% for 0.5 mass% Cu and more than 90% for 1.1 mass% Cu alloy, which shows good agreement with the experimental data.     

Impact of Dynamic Interlayer Interactions on Thermal Conductivity of Ca3Co4O9

The phonon thermal conductivity of misfit-layered Ca₃Co₄O₉ has been calculated by perturbed molecular dynamics using a classical force field. Detailed numerical analyses reveal that, in spite of its smaller cross-sectional area, the CoO₂ layer transports more heat than the thicker rock salt (RS) layer, although its local thermal conduction is more suppressed than in another layered cobaltite, Na _x CoO₂. The origins of these differences have been elucidated through careful examination of the atomic arrangements in each layer. Since thermal conduction in the RS layer can be reduced without deteriorating electronic properties for which the CoO₂ layer is responsible, it is suggested that the RS layer should be modified to further suppress the overall in-plane thermal conductivity. Computational experiments with increasing number of Ca–O planes in the RS layer showed the opposite trend to what can be predicted based on the misfit between two dissimilar layers. Further analyses to reveal the origin of these unexpected results provide yet another strategy to further decrease the thermal conductivity, namely to control the dynamic interference between atoms across the interface between two layers.     

Design strategy and development of spherical silicon solar cell with semi-concentration reflector system

Structural and economical merits of a spherical silicon solar cell with semi-concentration reflector system have been discussed. The roles of the reflector system have been clarified; the reflector improves short-circuit current density and also open-circuit voltage by 4–6 times concentration to make a light irradiation area comparable to a p–n junction area. We have theoretically demonstrated that the spherical Si solar cell with semi-concentration reflector system can realize a performance comparable to that of conventional Si solar cells, with less amount of silicon material use.     

Effect of active oxygen species on the productivity of torularhodin by Rhodotorula glutinis No. 21

The effect of active oxygen species on the productivity of torularhodin, an effective antioxidant, by soil yeast, Rhodotorula glutinis no. 21, was examined. Methylene blue, methyviologen and AAPH [2,2'-azobis(2-amidinopropane) dihydrochloride] were used as generators of singlet oxygen, superoxide anion radicals and peroxy radicals, respectively. All of them indicated effectiveness at a dose of 1.0 x 10(-10) to 3.0 x 10(-6) M. Addition of these generators to the culture medium had almost no influence on the biosynthesis of beta-carotene, whereas it had marked enhancement on those of torulene and torularhodin. Production of uric acid by xanthineoxidase remained unchanged at a torularhodin concentration of up to 100 microM. This result suggests that torularhodin does not directly affect the productivity of superoxide anions. It has been proved that torularhodin has a more potent effect on the scavenging of peroxyl radicals and inhibits substrate degradation by singlet oxygen more effectively than beta-carotene does. Continuous addition of methylene blue enhanced the torularhodin accumulation more markedly than single addition.     

Changes in lipids and their contribution to the taste of migaki-nishin (dried herring fillet) during drying

This study was conducted to investigate the changes in lipids and their effect on the taste of migaki-nishin during drying. Lipid was extracted from herring fillets following different drying stages to measure the degree of lipid oxidation and changes in lipid composition, and fatty acid profile. Peroxide value, carbonyl value and acid value of the lipids were significantly increased (P < 0.05) during the drying period. Marked increase in free fatty acids, with decreases in triglyceride and phospholipid content were observed in proportion to drying time and this result suggested that hydrolysis was induced by lipases and phospholipases. The decreases in polyunsaturated fatty acids (PUFAs), especially eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), were observed in the total lipids and phospholipid fraction. In addition, significant increase in PUFAs especially DHA was found in the free fatty acid fraction. Sensory evaluation showed that an addition of DHA to mentsuyu significantly (P < 0.05) enhances the intensities of thickness, mouthfulness and continuity. These results suggest that during drying period lipid oxidation was not only occurred but also lipolysis predominantly released DHA, which might have a contribution to kokumi enhancement of migaki-nishin.