The influence of preparation conditions on the electrochemical behaviour of CuO in a Li/CuO cell

A dozen CuO samples prepared under various conditions and from different starting materials were evaluated as cathode materials for a primary Li/CuO cell. The “thin electrode” method was used for rapid evaluation of the samples. Both coulombic efficiency and discharge voltage depend considerably on the method of synthesis. No correlation was found between the specific surface area and the resistivity of the samples on the one hand and the cathode performance on the other. Best results were obtained from CuO prepared by the oxidation of Cu₂O under controlled temperature and time of oxidation.     

Lithium Intercalation Compound Dramatically Influences the Electrochemical Properties of Exfoliated MoS2

MoS₂ and other transition metal dichalcogenides (TMDs) have recently gained a renewed interest due to the interesting electronic, catalytic, and mechanical properties which they possess when down‐sized to single or few layer sheets. Exfoliation of the bulk multilayer structure can be achieved by a preliminary chemical Li intercalation followed by the exfoliation due to the reaction of Li with water. Organolithium compounds are generally adopted for the Li intercalation with n‐butyllithium (n‐Bu‐Li) being the most common. Here, the use of three different organolithium compounds are investigated and compared, i.e., methyllithium (Me‐Li), n‐butyllithium (n‐Bu‐Li) and tert‐butyllithium (t‐Bu‐Li), used for the exfoliation of bulk MoS₂. Scanning transmission electron microscopy (STEM), Raman spectroscopy, X‐ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV) are adopted for a comprehensive characterization of all materials under investigation. In addition, catalytic properties towards the hydrogen evolution reaction (HER) and capacitive properties are also tested. Different organolithium compounds exhibit different extent of Li intercalation resulting in different degrees of exfoliation. The inherent electrochemical behavior of MoS₂ consisting of significant anodic and cathodic peaks as well as its capacitive behavior and catalytic properties towards hydrogen evolution reaction are strongly connected to the exfoliation compound used. This research significantly contributes to the development of large‐scale synthesis of electrocatalytic MoS₂‐based materials.     

Hybrid charge control for stick-slip piezoelectric actuators

The article describes an analog electronic circuit for driving stick-slip piezoelectric linear actuators. The task for the amplifier is to provide a high-voltage asymmetric sawtooth-like signal and feed it into a capacitive load. Generation of excessive heat must be avoided while maximizing the slew rate. In order to guarantee a steady translation, the hysteretic behaviour of the piezoelectric material must be compensated. Combination of a charge control scheme with switching is proposed as an efficient solution. Laboratory experiments confirm the superiority of this tailored solution over other existing techniques based on versatile linear voltage amplifiers.     

Superradiant Emission from Coherent Excitons in van Der Waals Heterostructures

Recent advancements in isolation and stacking of layered van der Waals materials have created an unprecedented paradigm for demonstrating varieties of 2D quantum materials. Rationally designed van der Waals heterostructures composed of monolayer transition-metal dichalcogenides (TMDs) and few-layer hBN show several unique optoelectronic features driven by correlations. However, entangled superradiant excitonic species in such systems have not been observed before. In this report, it is demonstrated that strong suppression of phonon population at low temperature results in a formation of a coherent excitonic-dipoles ensemble in the heterostructure, and the collective oscillation of those dipoles stimulates a robust phase synchronized ultra-narrow band superradiant emission even at extremely low pumping intensity. Such emitters are in high demand for a multitude of applications, including fundamental research on many-body correlations and other state-of-the-art technologies. This timely demonstration paves the way for further exploration of ultralow-threshold quantum-emitting devices with unmatched design freedom and spectral tunability.     

Influence of different SiC surface treatments performed prior to Ni ohmic contacts formation

This work is dealing with the influence of surface treatment on ohmic contacts to hexagonal N-type SiC with medium doping level. The contact materials were Ni and Ni₂Si. The structures had to be annealed at high temperatures in order to reach ohmic behavior. A number of surface treatment methods were tested: wet cleaning, plasma etching, intentional oxidation with etching, H₂ annealing and their combinations. After some types of cleaning, the SiC surface was immediately analysed using the XPS method. The results of the analyses showed that the composition of the surface was not much influenced by these treatments. At lower annealing temperatures (approx. up to 850 °C) the prepared contacts showed Schottky behavior with large scatter of parameters. After annealing at approx. 960 °C, where the onset of ohmic behavior is expected, the structures were truly ohmic and of good parameters. Cleaning methods had just a negligible influence on the electrical parameters of the ohmic contacts. An explanation for these observed facts is suggested: Although - already on the basis of the XPS results - we could speak about a negligible influence of the cleaning onto the contact parameters, there might come across also other mechanisms coming from interaction of contact materials with SiC, which caused similar behavior of ohmic contacts on differently treated surfaces.     

Smart Skin-Adhesive Patches: From Design to Biomedical Applications

With the advancement of medical and digital technologies, smart skin adhesive patches have emerged as a key player for complex medical purposes. In particular, skin adhesive patches with integrated electronics have created an excellent platform for monitoring health conditions and intelligent medication. However, the efficient design of the adhesive patches is still challenging as it requires a strong combination of network structure, adhesion, physical properties, and biocompatibility. To design an assimilated device, one must have a deep knowledge of various skin adhesive patches. This article provides a comprehensive review of the recent advances in skin-adhesive patches, including hydrogel-based adhesive patches, transdermal patches, and electronic skin (E-skin) patches, for various biomedical applications such as wound healing, drug delivery, biosensing, and health monitoring. Furthermore, the key challenges, implementable strategies, and future designs that can potentially provide researchers in designing innovative multipurpose smart skin patches are discussed. These advanced approaches are promising for managing the health and fitness of patients who require regular medical care.     

Oxygen‐Free Highly Conductive Graphene Papers

Graphene papers have a potential to overcome the gap from nanoscale graphene to real macroscale applications of graphene. A unique process for preparation of highly conductive graphene thin paper by means of Ar⁺ ion irradiation of graphene oxide (GO) papers, with carbon/oxygen ratio reduced to 100:1, is presented. The composition of graphene paper in terms of carbon/oxygen ratio and in terms of types of individual oxygen‐containing groups is monitored throughout the process. Angle‐resolved high resolution X‐ray photoelectron spectroscopy helps to investigate the depth profile of carbon and oxygen within reduced GO paper. C/O ratios over 100 on the surface and 40 in bulk material are observed. In order to bring insight to the processes of oxygen removal from GO paper by low energy Ar⁺ ion bombardment, the gases released during the irradiation are analyzed by mass spectroscopy. It is proven that Ar⁺ ion beam can be applied as a technique for fabrication of highly reduced graphene papers with high conductivities. Such highly conductive graphene papers have great potential to be used in application for construction of microelectronic and sensor devices.     

The substitution of a traditional starter culture in mutton fermented sausages by Lactobacillus acidophilus and Bifidobacterium animalis

Common starter cultures used in fermented mutton sausages were substituted by probiotic strains of Lactobacillus acidophilus CCDM 476 and Bifidobacterium animalis 241a. Technological properties of the traditional and the probiotic sausages were compared. The potential probiotic effect was evaluated by enumeration of bifidobacteria and lactobacilli in stool samples of 15 volunteers before and after a 14-day consumption period. The numbers of lactobacilli (10⁷ cfu/g) and bifidobacteria (10³ cfu/g) in the final product did not affect the technological properties. The use of L. acidophilus as a starter culture was found more beneficial than the use of B. animalis. Even after 60 days of storage, high counts of L. acidophilus (10⁶ cfu/g) were detected; on the other hand, the counts of B. animalis were under the detection limit. Regarding sensory properties, the probiotic products showed better texture, and, curiously, a reduction of the typical smell of mutton. The numbers of lactobacilli in stool samples increased significantly after the consumption of the probiotic sausages.     

Determining adulteration of canned products using SNIF-NMR and IRMS: detection of undeclared addition of synthetic acetic acid

Possible adulteration of canned products containing spirit vinegar pickle by adding synthetic acetic acid is a significant problem of the food industry. Isotope analyses, which determine botanical origin of acetic acid and also can detect synthetic acid, were applied to detect undeclared addition of synthetic acetic acid to canned products. The aim of the study was to improve the extraction technique for the SNIF-NMR (²H/¹H; site-specific natural isotopic fractionation-nuclear magnetic resonance) and IRMS (¹³C/¹²C; isotope ratio mass spectrometry) isotope methods and for an atypical matrix and to determine isotope ratios in canned vegetables pickle to prove their adulteration or authenticity. The following set of canned products was analysed: pickled cucumbers (n = 16) and one vinegar pickle purchased in the Czech market and six model (cucumber) pickles. The determined ratios of ²H/¹H and ¹³C/¹²C for the pickled cucumbers proved to be authentic ranged from 89.4 to 107.0 ppm and from ?28.7 to ?15.6 ‰, respectively; for the synthetic acetic acids diluted with water they ranged from 114.2 to 129.0 ppm and from ?44.9 to ?33.4 ‰, respectively. Isotope analyses were confirmed as a reliable tool for assessing authenticity of canned products. The method enables detection of synthetic acetic acid addition into vinegars and canned vegetables containing vinegar pickle up from 20 % (of total acidity).