A unified proposal for characteristic testing methods and figure of merit of 8‐kV/3.5‐kVA class light‐triggered thyristors

Power devices with high capability have been developed. 8‐kV/3.5‐kA‐class light‐triggered thyristors have the highest capability among power devices. These devices are used in the Kii Channel HVDC transmission system in Japan. In this paper, we report the extracted problems of conventional testing methods of 8‐kV/3.5‐kA‐class light‐triggered thyristors among manufacturers, and the proposed unified testing methods on the basis of element characteristics and operating conditions in the Kii Channel HVDC system. Furthermore, we propose a figure of merit for power devices for the practical use, and try to extract elements used at the Kii Channel HVDC system with small margins and low withstand capabilities. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 140(3): 61–70, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10024     

Photolithographic patterning of organic photodetectors with a non-fluorinated photoresist system

We report on the fabrication of organic photodetectors (OPD) based on isolated islands of P3HT:PCBM. Pattern transfer to the active material was done with photolithography based on non-fluorinated solvents and the excessive organic semiconductor was removed with oxygen plasma reactive ion etching. The photoresist system used was found to be benign to the P3HT:PCBM layer as confirmed by absorption, thickness and roughness measurements. Current–voltage characteristics and external quantum efficiency (EQE) remained unchanged after the patterning process. It was demonstrated that it is possible to photolithographically pattern isolated islands with 200 μm edge length with the same dark current density (<10⁻⁵ A/cm² at −2 V bias voltage) and photocurrent density (>5 × 10⁻³ A/cm² at −2 V). Furthermore, concerning the solar cell performance, the patterned, small-area devices showed power conversion efficiency of 2.1% and fill-factor of 60%. Dark current was observed to depend on the size of the remaining semiconductor island, which was demonstrated on OPDs with diameter of 50 μm. The presented results show the feasibility of fabrication of isolated devices based on organic semiconductors patterned with non-fluorinated photolithography.     

Detection and visualization method of dynamic state transition for biological spatio-temporal imaging data

In the statistical analysis of functional brain imaging data, regression analysis and cross correlation analysis between time series data on each grid point have been widely used. The results can be graphically represented as an activation map on an anatomical image, but only activation signal, whose temporal pattern resembles the predefined reference function, can be detected. In the present study, we propose a fusion method comprising innovation approach in time series analysis and statistical test. Autoregressive (AR) models were fitted to time series data of each pixel for the range sufficiently before or after the state transition. Then, the remaining time series data were filtered using these AR parameters to obtain its innovation (filter output). The proposed method could extract brain neural activation as a phase transition of dynamics in the system without employing external information such as the reference function. The activation could be detected as temporal transitions of statistical test values. We evaluated this method by applying to optical imaging data obtained from the mammalian brain and the cardiac sino-atrial node (SAN), and demonstrated that our method can precisely detect spatio-temporal activation profiles in the brain or SAN.     

A rod matrix compensator for small-field intensity modulated radiation therapy: a preliminary phantom study

A compensator made of a tungsten-based rod matrix has been proposed for small-field intensity modulated radiation therapy. The compensator was attached to a 6 MV linac gantry head. The proposed compensator could modulate the X-ray intensity with a step of 10% and a minimum transmission of 2.5%.     

Self‐consistent electrical parameter extraction from bias dependent spectral response measurements of III‐V multi‐junction solar cells

Spectral response of multi‐junction solar cell is complicated because of the interplay between external measurement conditions such as bias light intensity, monochromatic light intensity, bias voltage, and intrinsic electrical properties of series interconnected subcells. In this paper, we report an experimental study on the bias voltage‐dependent spectral response (SR) for multi‐junction solar cell. A self‐consistent iteration loop was developed from a nonlinear least square Powell hybrid algorithm that was used for curve fitting the experimental SR versus bias voltage data of each subcell. We demonstrated for the first time that this approach enabled us to derive the electrical parameters such as dark saturation currents (J₀), shunt resistance (R_sh), series resistance (R_s), and spectra response (J_photo) for each subcell of a Ga_0.99In_0.01As/Ge dual junction solar cell with stable convergence. The accuracies of the fitting results were confirmed by the agreement between the J–V curves calculated on the basis of these parameters and the experimental J–V curve of multi‐junction solar cell measured under AM1.5 and 1 sun condition. Copyright © 2013 John Wiley & Sons, Ltd.     

Design and VLSI evaluation of a high-speed cellular array divider with a selection function

In recent years, very fast dividers have been required for the real-time application of digital signal processing, robot control, and the like. This paper proposes a high-speed cellular array divider with a selection function that is based on the non-restoring algorithm and can deal with both fixed-point and negative operands in two's complement form. This divider uses new techniques that can generate in parallel both the quotient bit of one row and a partial remainder and CLS bit of the next row. The delay time of the proposed divider is calculated in terms of a delay of one unit such as a NAND gate. Finally, by using PARTHENON, a CAD (computer-aided design) system for VLSI, this divider is designed and evaluated. As a result, elimination of the delay time for even rows becomes possible. Thus, the delay time can be decreased to approximately one half that of the high-speed divider proposed by Cappa and Hamacher, which uses the most general high-speed techniques of carry-save and CLA.     

A variational method for geometric regularization of vascular segmentation in medical images

In this paper, a level-set-based geometric regularization method is proposed which has the ability to estimate the local orientation of the evolving front and utilize it as shape induced information for anisotropic propagation. We show that preserving anisotropic fronts can improve elongations of the extracted structures, while minimizing the risk of leakage. To that end, for an evolving front using its shape-offset level-set representation, a novel energy functional is defined. It is shown that constrained optimization of this functional results in an anisotropic expansion flow which is usefull for vessel segmentation. We have validated our method using synthetic data sets, 2-D retinal angiogram images and magnetic resonance angiography volumetric data sets. A comparison has been made with two state-of-the-art vessel segmentation methods. Quantitative results, as well as qualitative comparisons of segmentations, indicate that our regularization method is a promising tool to improve the efficiency of both techniques.     

Basis Translation Matrix between Two Isomorphic Extension Fields via Optimal Normal Basis

This paper proposes a method for generating a basis translation matrix between isomorphic extension fields. To generate a basis translation matrix, we need the equality correspondence of a basis between the isomorphic extension fields. Consider an extension field F_p^m where p is characteristic. As a brute force method, when p^m is small, we can check the equality correspondence by using the minimal polynomial of a basis element; however, when p^m is large, it becomes too difficult. The proposed methods are based on the fact that Type I and Type II optimal normal bases (ONBs) can be easily identified in each isomorphic extension field. The proposed methods efficiently use Type I and Type II ONBs and can generate a pair of basis translation matrices within 15 ms on Pentium 4 (3.6 GHz) when mlog₂ p = 160.     

Engineering of Lipid Nanoparticles by the Multifunctionalization of the Surface with Amino Acid Derivatives for the Neutralization of a Target Toxic Peptide

Protein affinity reagents (e.g., antibodies) are often used for basic research, diagnostics, separations, and disease therapy. Although a lot of “synthetic” protein affinity reagents have been developed as a cost-effective alternative to antibodies, their low biocompatibility is a considerable problem for clinical application. Lipid nanoparticles (LNP) represent a highly biocompatible drug delivery agent. However, little has been reported that LNP itself works as a protein affinity reagent in living animals. Here, LNP is engineered for binding to and neutralizing a target toxic peptide in living animals by multifunctionalization with amino acid derivatives. Multifunctionalized LNP (MF-LNP) is prepared using amino acid derivative-conjugated lipids. Optimized MF-LNP exhibits nanomolar affinity to the target toxic peptide and inhibits toxic peptide-dependent hemolysis and cytotoxicity. In addition, MF-LNP captures and neutralizes the toxic peptide after intravenous injection in the bloodstream; in addition, MF-LNP does not release the toxic peptide in the accumulated organ. These results reveal the potential of using LNP as a highly biocompatible protein affinity reagent such as an antidote.     

ArF excimer laser induced CVD of aluminum oxide films

The authors have demonstrated photochemical deposition of aluminum oxides from Trimethylaluminum (TMA) and N₂O by using a pulsed ArF excimer laser (193 nm). Both TMA and N₂O are efficiently photodissociated by the 193 nm light. The films are grown on Si and InP wafers contained in a low pressure flowing cell with a heated substrate. The incident laser beam is focused and parallel to the substrate surface. Typical deposition rates are 80–150 A/min. Stripes of aluminum oxide 30 mm wide are uniformly grown on 7.5 cm Si-wafers. The film composition and purity have been investigated using Auger and Infra-red spectroscopy analysis. Surprising results are the relatively low concentration of carbon. Refractive index and thickness have been determined by an ellipsometer. Typical values for the films are 1.54–1.62. Metal-oxide-semiconductor capacitors have been fabricated and characterized. The C-V curves for n-InP/aluminum oxide have clockwise hysteresis, and minimum loop width is less than 0.5 V. The surface state densities are 1 × 10¹¹ cm^-2 eV⁻¹ at the mid band gap.