Development of Millimeter Wave Fabry-Pérot Resonator for Simultaneous Electron-Spin and Nuclear Magnetic Resonance Measurement

We report a Fabry-Pérot resonator with spherical and flat mirrors to allow simultaneous electron-spin resonance (ESR) and nuclear magnetic resonance (NMR) measurements that could be used for double magnetic resonance (DoMR). In order to perform simultaneous ESR and NMR measurements, the flat mirror must reflect millimeter wavelength electromagnetic waves and the resonator must have a high Q value (Q?>?3000) for ESR frequencies, while the mirror must simultaneously let NMR frequencies pass through. This requirement can be achieved by exploiting the difference of skin depth for the two frequencies, since skin depth is inversely proportional to the square root of the frequency. In consideration of the skin depth, the optimum conditions for conducting ESR and NMR using a gold thin film are explored by examining the relation between the Q value and the film thickness. A flat mirror with a gold thin film was fabricated by sputtering gold on an epoxy plate. We also installed a Helmholtz radio frequency coil for NMR and tested the system both at room and low temperatures with an optimally thick gold film. As a result, signals were obtained at 0.18 K for ESR and at 1.3 K for NMR. A flat-mirrored resonator with a thin gold film surface is an effective way to locate NMR coils closer to the sample being examined with DoMR.     

Homogeneous and Disordered Assembly of Densely Packed Nanocrystals

A homogeneous and disordered assembly of densely packed nanocrystals is generated without the assistance of organic molecules, from an aqueous solution at room temperature. The densely packed nanocrystals of tin dioxide (SnO₂) and titanium dioxide (TiO₂), 2–3 nm in size, form glassy macroscopic transparent objects of 2–10 mm. The monodisperse nanocrystals, which have a surface hydrated layer and are synthesized in aqueous solution, are densely packed in an homogeneous and disordered assembly through the evaporation of water as the dispersion medium. The formation of transparent bulk objects on the macroscopic scale originates from the homogeneous and disordered nature of the densely packed nanocrystals. The resultant homogeneous architectures are distinguishable from the typical inhomogeneous and disordered aggregates of nanoparticles observed after evaporation of the dispersion medium. Among superstructures based on nanocrystals, such as superlattices and mesocrystals, the resultant homogeneous and disordered assembly can be regarded as a new class of solid‐state material.     

Temperature dependence for anammox bacteria enriched from freshwater sediments

The anoxic ammonium oxidation (anammox) process has been regarded as an attractive alternative process to treat wastewater containing high ammonium concentrations. By the implementation of anammox process at moderately low temperatures (<25°C), the anammox process will be applied to more various industrial wastewater treatments. In this study, we established enrichment cultures of anammox bacteria from freshwater sediments by using an up-flow column reactor equipped with porous polyester nonwoven fabric at moderately low temperatures. Their nitrogen conversion rates reached 0.07-0.26kg-N/m(3)/d. Phylogenetic analysis based on 16S rRNA gene from enrichment cultures revealed the presence of various anammox bacteria affiliated with unknown anammox bacteria as well as known anammox candidates, i.e., Candidatus Kuenenia stuttgartiensis and Candidatus Brocadia fulgida, Candidatus Scalindua wagneri. Anammox bacterial populations were influenced by enrichment conditions, i.e., seed sediments and temperature.     

Selective production of lactic acid in continuous anaerobic acidogenesis by extremely low pH operation

The selective production of lactic acid by anaerobic acidogenesis with low pH control was examined using a chemostat culture. By decreasing culture pH to 3.5 in a chemostat culture containing mixed microbial populations for anaerobic acidogenesis, heterolactic fermentation became dominant, resulting in the selective production of lactic acid and ethanol. This phenomenon was reversible between the acidic and neutral conditions, and was not affected by the dilution rate. The extremely low pH operation was effective for selective lactic acid production in anaerobic acidogenesis.     

Mutation Analysis of Radioresistant Early-Stage Cervical Cancer

Radiotherapy is a definitive treatment for early-stage cervical cancer; however, a subset of this disease recurs locally, necessitating establishment of predictive biomarkers and treatment strategies. To address this issue, we performed gene panel-based sequencing of 18 stage IB cervical cancers treated with definitive radiotherapy, including two cases of local recurrence, followed by in vitro and in silico analyses. Simultaneous mutations in KRAS and SMAD4 (KRAS^mt/SMAD4^mt) were detected only in a local recurrence case, indicating potential association of this mutation signature with radioresistance. In isogenic cell-based experiments, a combination of activating KRAS mutation and SMAD4 deficiency led to X-ray resistance, whereas either of these factors alone did not. Analysis of genomic data from 55,308 cancers showed a significant trend toward co-occurrence of mutations in KRAS and SMAD4. Gene Set Enrichment Analysis of the Cancer Cell Line Encyclopedia dataset suggested upregulation of the pathways involved in epithelial mesenchymal transition and inflammatory responses in KRAS^mt/SMAD4^mt cancer cells. Notably, irradiation with therapeutic carbon ions led to robust killing of X-ray-resistant KRAS^mt/SMAD4^mt cancer cells. These data indicate that the KRAS^mt/SMAD4^mt signature is a potential predictor of radioresistance, and that carbon ion radiotherapy is a potential option to treat early-stage cervical cancers with the KRAS^mt/SMAD4^mt signature.     

Composition Regulation by Flow Copolymerization of Methyl Methacrylate and Glycidyl Methacrylate with Free Radical Method

It is important to match the feeding ratio of comonomers to the composition ratio in the resulting copolymers as closely as possible in industrial production, where the goal is often to produce more a homogeneous composition in copolymers. In this study, a flow copolymerization system with a conventionally initiated free radical method, together with randomly selected polymerization conditions is investigated. It is succeeded in achieving a closer match between the composition ratio and feeding ratio than previously reported in the copolymerization of styrene with methyl methacrylate and of glycidyl methacrylate with methyl methacrylate, which will widen the range of applications, by precisely controlling the mixing and heating in a flow polymerization apparatus. This is confirmed by the fact that the estimated values of reactivity ratios, r₁ and r₂, which are used in the reaction kinetics of copolymerization, are close to 1.     

Dip Coating of Water-Resistant PEDOT:PSS Films Based on Physical Crosslinking

Water-resistant poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films are valuable in biomedical applications; however, they typically require crosslinkers to stabilize the films, which can introduce undesired aggregation or phase separation reactions. Herein, a dipping-based process to prepare PEDOT:PSS films on nonplanar surfaces without crosslinker is developed. Sequential soaking of a dip-coated PEDOT:PSS film in ethanol and water imparts water resistance to the film. Microscopic and spectroscopic techniques are used to monitor the process and confirm that the ethanol soaking elutes the excess PSS from the film bulk, which stabilizes the film prior to the water-soaking process. The obtained films act as conductors and semiconductors on curved surfaces, including 3D-printed objects. A film deposited on a curved surface is successfully applied as the channel layer in a neuromorphic organic electrochemical transistor. This approach can enable integrated bioelectronic and neuromorphic applications that can be readily deployed for facile prototyping.     

Changes in the melting temperature and crystal structure of poly(vinylidene fluoride) by knotting

A significant increase in the melting temperature of knotted fibers of poly(vinylidene fluoride) (PVDF) was detected by differential scanning calorimetry. The melting peak partially returned to the original peak after the fibers were unknotted. Knotted PVDF fibers were observed with an optical microscope at crossed‐nicol conditions. The knotted portions of the fibers showed birefringence even above the melting temperature of the fibers before knotting. The dependence of the physical properties of PVDF under applied stress was estimated in order to investigate the influence of knotting. The fracture temperature of PVDF fibers increased with applied stress below 1 MPa and decreased above 10 MPa because the applied stress increased the melting temperature of PVDF crystals, but strong stress mechanically broke the fibers. The X‐ray diffraction patterns of the PVDF fibers under different stress were divided into the peaks of α‐ and β‐phase crystals and amorphous. The peak area of the β‐phase crystal increased and that of the amorphous decreased with applied stress. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013