Atmospheric corrosion of reference metals in Antarctic sites

This paper presents the results obtained at three Antarctic test sites participating in the “Ibero-American Map of Atmospheric Corrosiveness” (MICAT), a project on atmospheric corrosion carried out during the period 1988–1994 at some 70 sites distributed across 12 countries of the Latin-American region, Spain and Portugal. The three Antarctic sites are located near the coastline.The singular climatic characteristics of Antarctic regions are related with the purity of the air, the absence of rainfall and the formation of ice on the metallic surface during an important part of the exposure time. However, electrochemical activity is possible below ice layers. This situation affects the structure and morphology of corrosion product films and the resulting corrosion rates of metallic surfaces.     

Single stage and double absorption heat transformers used to recover energy in a distillation column of butane and pentane

This paper presents the theoretical analysis of the use of single stage and double absorption heat transformers operating with the water–lithium bromide mixture coupled to a butane and pentane distillation column in a Mexican refinery. A mathematical model of the heat transformers was developed in FORTRAN and integrated as a user model to the Aspen Plus simulation code. Both components coupled to the column were modelled on steady-state conditions. The results show that it is theoretically possible to reduce the energy consumed in the reboiler between 26 and 43% by the use of single stage heat transformer at specific conditions, and between 28 and 33% with double absorption heat transformers for a wide range of operating conditions. Copyright © 2003 John Wiley & Sons, Ltd.     

Epidemiology of peptic ulcer disease in cirrhotic patients: role of Helicobacter pylori infection

OBJECTIVE: The aim of this study was to investigate the clinical and epidemiological factors associated with the appearance of peptic ulcer in patients with cirrhosis and, in particular, the role of Helicobacter pylori infection. METHODS: A total of 201 of 220 consecutive patients included in a prospective study that aimed to evaluate the effect of dietary intervention on cirrhotic complications and survival underwent upper gastrointestinal endoscopy. At entry, an epidemiological and clinical questionnaire was completed and the presence of peptic ulcer disease or esophageal varices at endoscopy was prospectively collected. Sera were obtained and stored at -70 degrees C until analyzed, being tested afterward for Helicobacter pylori antibodies using a commercial ELISA kit. RESULTS: Eleven of 201 patients had borderline anti-Helicobacter pylori IgG titers and were excluded from further analysis. In the remaining 190 patients, point prevalence of peptic ulcer was 10.5% and lifetime prevalence 24.7%. Multivariate analysis selected male sex (OR 2.3; 95%CI 1.09-4.89) and Helicobacter pylori seropositivity (OR: 1.7, 95%CI 1.02-2.81) as the variables independently related to peptic ulcer disease. CONCLUSIONS: Male sex and seropositivity for Helicobacter pylori are the major risk factors for peptic ulcer in cirrhosis.     

Evaluation of Surface Residual Stresses in Friction Stir Welds Due to Laser and Shot Peening

The effects of laser, and shot peening on the residual stresses in friction stir welds (FSW) has been investigated. The surface residual stresses were measured at five different locations across the weld in order to produce an adequate residual stress profile. The residual stresses before and after sectioning the coupon from the welded plate were also measured, and the effect of coupon size on the residual stress relaxation was determined and characterized. Measurements indicate that residual stresses were not uniform along the welded plate, and large variation in stress magnitude could be exhibited at various locations along the FSW plate. Sectioning resulted in significant residual stress relaxation in the longitudinal direction attributed to the large change in dimensions in this direction. Overall, laser and shot peening resulted in a significant reduction in tensile residual stresses at the surface of the specimens.     

Boolean operations on general planar polygons

Computing boolean operations between general planar polygons is one of the fundamental problems in geometric and solid modeling. In this work we present a new algorithm to calculate intersection, union and difference, valid for general planar polygons (manifold and non-manifold, with and without holes), based on a formal representation system. This formal model is based on the concept of simplicial chain, developed by Feito and Rivero (Computers & Graphics 22(5) (1998)). Using algebraic operations between simplicial chains we can obtain any general polygon and the Boolean operations between them. The fact of that our algorithm is based on simplicial chains and their operations, reduces the study of special cases, and allows us to develop a robust and efficient algorithm to calculate the intersection between general polygons.     

Classification of signals by means of Genetic Programming

This paper describes a new technique for signal classification by means of Genetic Programming (GP). The novelty of this technique is that no prior knowledge of the signals is needed to extract the features. Instead of it, GP is able to extract the most relevant features needed for classification. This technique has been applied for the solution of a well-known problem: the classification of EEG signals in epileptic and healthy patients. In this problem, signals obtained from EEG recordings must be correctly classified into their corresponding class. The aim is to show that the technique described here, with the automatic extraction of features, can return better results than the classical techniques based on manual extraction of features. For this purpose, a final comparison between the results obtained with this technique and other results found in the literature with the same database can be found. This comparison shows how this technique can improve the ones found.     

Mass transfer modeling and simulation at a rotating cylinder electrode (RCE) reactor under turbulent flow for copper recovery

This work presents the numerical simulation of a laboratory reactor with rotating cylinder electrode (RCE) and a six-plate counter electrode that is used in studies on heavy metal recovery. The rate of electrode rotation and the potential applied are of such magnitude that the electrochemical reactor works in conditions of mass transport control under turbulent flow to obtain high recovery rates and formation of dendritic metal deposits. For hydrodynamics, the Reynolds averaged Navier–Stokes (RANS) equations were solved using the standard k–ε turbulence model, as well as wall functions based on the universal velocity distribution in the near-wall region. Results of 3-D simulations of the velocity field show clearly the formation of the turbulence Taylor vortex flow. For mass transfer, convection–diffusion equation was solved using the Kays–Crawford model for turbulent Schmidt number and Launder–Spalding wall functions adapted for mass transfer. Kinetics of copper recovery from aqueous solutions containing 0.019 M CuSO₄ and 1 M H₂SO₄, in the range of rotation speed of 400–1100 rpm, was adequately fit (error <8%) during the electrolysis time to achieve a final recovery of 85% for potentiostatic and 60% for galvanostatic experiments. The fitting parameter of the concentration wall function used in all experiments was A=2.9.     

Electrodeposited amorphous Co-P alloys with variable magnetic anisotropy

A method is indicated for obtaining electrodeposited amorphous Co-P alloys with differing anisotropies, employing an alternating current density of very low frequency. The method allows samples of a high degree of permeability to be obtained with the result that, in the case of a current density at 5 Hz with amplitude between +0.6 and -0.2 A/cm², the magnetic properties are similar to those found by Dietz and coworkers, in samples deposited on rotating cylindrical substrates. In the case of samples without perpendicular anisotropy, there can be observed a distribution of the magnetization in the plane, with 180° domains.     

A new approach to the extraction of ANN rules and to their generalization capacity through GP

Various techniques for the extraction of ANN rules have been used, but most of them have focused on certain types of networks and their training. There are very few methods that deal with ANN rule extraction as systems that are independent of their architecture, training, and internal distribution of weights, connections, and activation functions. This article proposes a methodology for the extraction of ANN rules, regardless of their architecture, and based on genetic programming. The strategy is based on the previous algorithm and aims at achieving the generalization capacity that is characteristic of ANNs by means of symbolic rules that are understandable to human beings.     

Monitoring of drilling for burr detection using spindle torque

This work proposes and evaluates a monitoring method, based on internal signals from spindle torque, to detect non-desired burr formation during drilling operations. Five features of this signal showed to be related to burr height. The selected features were sensitive to the exit burr while comparatively insensitive to changes in process parameters. The experiments were performed in aeronautics aluminium, Al 7075-T6, under dry high speed conditions. A thresholding algorithm has been developed to distinguish if burr height is below or above a previously established onset. The predictability of the developed algorithm is above 92% for the tested range of process parameters. An appropriate implementation of this monitoring system can be used as an effective quality control of drilling operations.