An integrated system to remote monitor and control anaerobic wastewater treatment plants through the internet.

The TELEMAC project brings new methodologies from the Information and Science Technologies field to the world of water treatment. TELEMAC offers an advanced remote management system which adapts to most of the anaerobic wastewater treatment plants that do not benefit from a local expert in wastewater treatment. The TELEMAC system takes advantage of new sensors to better monitor the process dynamics and to run automatic controllers that stabilise the treatment plant, meet the depollution requirements and provide a biogas quality suitable for cogeneration. If the automatic system detects a failure which cannot be solved automatically or locally by a technician, then an expert from the TELEMAC Control Centre is contacted via the internet and manages the problem.     

Flight-vehicle structures education in the united states—Assessment and recommendations

An assessment is made of the technical contents of flight-vehicle structures curricula at 41 U.S. universities with accredited aerospace engineering programs. The assessment is based on the technical needs for the new and projected aeronautical and space systems as well as on the likely characteristics of the aerospace engineering work environment. A number of deficiencies and areas of concern are identified and recommendations are presented for enhancing the effectiveness of flight-vehicle structures education. A number of government supported programs that can help aerospace engineering education are listed in the appendix.     

A series active power filter based on a sinusoidalcurrent-controlled voltage-source inverter

A series active power filter working as a sinusoidal current source, in-phase with the mains voltage, has been developed and tested. The amplitude of the fundamental current in the series filter is controlled through the error signal generated between the load voltage and a pre-established reference. The control allows an effective correction of power factor, harmonic distortion and load voltage regulation. Compared with previous methods of control developed for series active filters, this method is simpler to implement because it is only required to generate a sinusoidal current, in-phase with the mains voltage, the amplitude of which is controlled through the error in the load voltage. The proposed system has been studied analytically and tested using computer simulations and experiments. In the experiments, it has been verified that the filter keeps the line current almost sinusoidal and in-phase with the line voltage supply. It also responds very quickly under sudden changes in load conditions, reaching its steady-state in about two cycles of the fundamental     

Improvement options for a former water-driven-mill building now used as a theatre

After investigating the financial feasibility (and so abandoning the idea) of providing self-generated electricity using hydro-power, it was recommended that the top priority should be the direct connection of an electricity supply, from the mains grid to the building; this would cost £8800. Thereby, the theatre would receive a relatively unrestricted supply of electricity at cheaper unit tariffs. This improvement should be followed by the most urgent repairs being carried out to the building fabric, at an estimated cost of £6990. These repairs are necessary to ensure the continued integrity of the building's structure, thereby inhibiting the on-going deterioration.

The energy and financial appraisal also suggested a priority listing of overall improvements to the building in order to achieve a significant, economically justifiable reduction in energy demand; the recommended options are estimated to cost in total £39819. However, the capital cost of such an upgrading would only be recouped, and the theatre achieve a sustainable future, if the building were to be used more intensively and for a wider range of activities than at present in order to increase its revenue significantly.

All prices as stated are those at August 1991.     

Siblings' differential experiences of marital conflict and differences in psychological adjustment.

The present study examined whether siblings experience marital conflict differently and whether such differences, if present, were associated with differences in their adjustment. Self-report data about marital conflict, children's depressed mood, behavioral conduct, and externalizing problems were obtained from 122 sibling pairs (mean ages = 10 and 12 years) and their parents. Results indicated that siblings were significantly different in exposure to and appraisals of marital conflict. Differences in siblings' exposure to marital conflict were significantly correlated with differences in their depressed mood, behavioral conduct, and externalizing problems. Differences in siblings' feelings of self-blame for marital conflict were significantly correlated with differences in their depressed mood and behavioral conduct. Children who experienced more marital conflict than their siblings had more adjustment problems than their siblings. These results highlight the importance of studying siblings' unique experiences of marital conflict to better understand its impact on children's adjustment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Microprocessor IDDQ testing: a case study

The author describe their incorporation of I_DDQ testing into the design of the PA-7100LC PA-RISC microprocessor. They also discuss design guidelines, measurement techniques, results after fabrication and volume production, and suggested improvement. Their 900,000-transistor custom design supports I_DDQ testing to ensure high quality without compromising 100-MHz-plus performance     

Posture variation among office workers when using different information and communication technologies at work and away from work

Office workers perform tasks using different information and communication technologies (ICT) involving various postures. Adequate variation in postures and muscle activity is generally believed to protect against musculoskeletal complaints, but insufficient information exists regarding the effect on postural variation of using different ICT. Thus, this study among office workers aimed to determine and compare postures and postural variation associated with using distinct types of ICT. Upper arm, head and trunk postures of 24 office workers were measured with the Physiometer® over a whole day in their natural work and away-from-work environments. Postural variation was quantified using two indices: APDF_(90-10) and EVA_(sd). Various ICT had different postural means and variation. Paper-based tasks had more non-neutral, yet also more variable postures. Electronics-based tasks had more neutral postures, with less postural variability. Tasks simultaneously using paper- and electronics-based ICT had least neutral and least variable postures. Tasks without ICT usually had the most posture variability. Interspersing tasks involving different ICT could increase overall exposure variation among office workers and may thus contribute to musculoskeletal risk reduction.     

WALL AND PARTICLE-SHAPE EFFECTS ON HEAT TRANSFER IN PACKED BEDS

The effective radial thermal conductivity and apparent heat transfer coefficient for a packed bed were experimentally determined for beds of spheres, full cylinders and hollow cylinders, for flow rates giving particle Reynolds numbers in the range 100-1000, and for tube to particle diameter ratios of 5-12. Over these ranges the radial Peclet number Pe_r showed significant dependence on solid conductivity, gas flow rate and particle shape, while the wall Biot number Bi showed significant dependence on tube to particle diameter ratio, gas flow rate and particle shape. These dependencies were predicted well by equations incorporating the effects of these variables into individual gas and solid phase parameters, which were then combined to give the effective or lumped parameters     

Detoxification of cereal plant allelochemicals by aphids: Activity and molecular weights of glutathioneS-transferase in three species of cereal aphids

The activity and molecular weights of glutathioneS-transferase were studied in three species of cereal aphid:Metopolophium dirhodum, Sitobion avenae, andRhopalosiphum padi. The highest level of glutathioneS-transferase activity was recorded in extracts fromM. dirhodum and the lowest fromS. avenae, and extracts of larvae were more active than those from adults. The activity of this enzyme was higher in extracts ofS. avenae andR. padi previously fed on a moderately resistant wheat variety than on a susceptible variety. Gel filtration followed by SDS-PAGE revealed three protein bands in the active fractions. The first had a molecular weight of 28,500 and the second of 27,500 and were present in all three species of aphid. The third protein differed in the three species, having a molecular weight of 26,000 inS. avenae, 25,500 inM. dirhodum, and 24,000 inR. padi.