Continuous hydrolysis of olive oil by lipase in microporous hydrophobic membrane bioreactor

Continuous hydrolysis of olive oil byCandida cylindracea’s lipase was studied in a microporous hydrophobic membrane bioreactor. Olive oil and buffer solution, fed continuously through two compartments partitioned by membrane, caused reaction at the interface of lipase-adsorbed membrane and buffer solution. Fatty acid was obtained in a single phase without being mixed with components of other phases. At all mean residence times, countercurrent flow mode was superior to cocurrent one. The lipase was adsorbed onto the membrane, and its adsorption was suggested to be partially specific from the experiments with enzymes having various levels of purity. The percent hydrolysis depended hyperbolically on the interfacial enzyme concentration. The hydrolysis seemed to be limited by diffusion of fat or fatty acid through the micropores of the membrane at higher interfacial enzyme concentrations. The lipase was stabilized significantly by glycerol added to the buffer solution. Satisfactory performance of the membrane bioreactor was obtained in a longterm continuous operation which lasted for 24 days by feeding buffer-glycerol (18.0%) solution over the adsorbed lipase. The operational half-life of the adsorbed enzyme was 15 days at 40 C.     

Separation of di- and tripeptides with solvent extraction and an emulsion liquid membrane

The extraction equilibria of various di- and tripeptides with di-2-ethylhexylphosphoric acid (D2EHPA) were studied at low pH values. The complex extracted to organic phase consisted of one molecule of peptide and two molecules of D2EHPA dimer. The extraction constants of the peptides correlated well with the distribution coefficients of peptides between 1-octanol and water, which is a measure of hydrophobicity. The permeation rates of peptides through an emulsion liquid membrane were examined by using D2EHPA as a carrier, Span 80 as an emulsifier and kerosene as a diluent. The rates varied considerably with peptide type, depending upon the hydrophobicity.     

Performance prediction of a hybrid‐excitation synchronous machine with axially arranged excitation poles and permanent‐magnet poles

This paper presents a method of predicting the steady‐state performance of a new hybrid‐excitation synchronous machine (HESM) theoretically. The field pole of this HESM is axially divided into two parts; one is an excitation part and the other a permanent‐magnet (PM) part. A nonlinear equivalent circuit, which can include the saliency of the rotor and the magnetic saturation due to the iron core, is derived. Based on this equivalent circuit, the steady‐state performance of the HESM is calculated, and the results are confirmed through experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 43–49, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20033     

Studies on syntheses and permeabilities of special polymer membranes. XVI. Permeation and separation characteristics of aqueous polymer solutions for acrylonitrile-styrene copolymer membranes

The permeation and separation characteristics of aqueous polymer solutions using acrylonitrile-styrene copolymer membranes were investigated under various conditions. The membranes obtained from dimethyl sulfoxide solution of acrylonitrile-styrene copolymer have not a sufficient reproducibility and stability of permeation. These lacks were improved by adding ethylene glycol or glycerol to the casting solution and treating the membranes with pressure. The permeation and separation characteristics were influenced significantly by the additional amount of above additives, the heat treatment temperature, and the operating pressure. It was found that the concentration polarization of poly(vinyl alcohol) molecules onto the surface of the acrylonitrile-styrene copolymer membranes is smaller than that onto hydrophilic polymer membranes such as membranes of cellulose acetate, cellulose nitrate, and nylon 12, etc. Moreover, the acrylonitrile-styrene copolymer membranes show better performance for separation and concentrating of aqueous polymer solutions than hydrophilic membranes.     

Hydrothermal Formation of Hydroxyapatite Layers on the Surface of Type-A Zeolite

Type-A zeolite evenly covered with hydroxyapatite thin layers was prepared using hydrothermal treatment at 120°C for 8 h under autogenous pressure. The hydroxyapatite needlelike nanocrystals, 100–200 nm in diameter and 30 nm in thickness, were grown under the reaction between discharged Ca²⁺ ions from type-A zeolite and PO₄³⁻ ions in (NH₄)₃PO₄ solution. The preferential orientations of the c -axis of hydroxyapatite crystals perpendicular to a zeolite surface were observed using transmission electron microscopy. The crystal structure of type-A zeolite was not destroyed under the reaction, but the surface morphology was changed only with complete covering of scaly hydroxyapatite particles.     

Parallel processing circuit of line image using neuristor

A simultaneous detecting circuit system of centers and lengths of some lines in one dimension is presented applying an electronic circuit model of the nervous axon with respect to signal transmission. This model consists of series of one basic section, and has functions of Neuristor. The circuit system has a paralell processing function. It is constructed by three layers. In the first layer each visual signal of lines is changed to electric pulse signal. In the second layer edges of each line are detected, and in the third layer these detected signals are converted into voltages which correspond to lengths of the lines. These functions were confirmed experimentally using its hardware.     

Inorganic/Organic Double‐Network Gels Containing Ionic Liquids

Highly robust ion gels, termed double‐network (DN) ion gels, composed of inorganic/organic interpenetrating networks and a large amount of ionic liquids (ILs), are fabricated. The DN ion gels with an 80 wt% IL content show extraordinarily high mechanical strength: more than 28 MPa of compressive fracture stress. In the DN ion gel preparation, a brittle inorganic network of physically bonded silica nanoparticles and a ductile organic network of polydimethylacrylamide (PDMAAm) are formed in the IL. Because of the different reaction mechanisms of the inorganic/organic networks, the DN ion gels can be formed by an easy and free‐shapeable one‐pot synthesis. They can be prepared in a controllable manner by manipulating the formation order of the inorganic and organic networks via not only multistep but also single‐step processes. When silica particles form a network prior to the PDMAAm network formation, DN ion gels can be prepared. The brittle silica particle network in the DN ion gel, serving as sacrificial bonds, easily ruptures under loading to dissipate energy, while the ductile PDMAAm network maintains the shape of the material by the rubber elasticity. Given the reversible physical bonding between the silica particles, the DN ion gels exhibit a significant degree of self‐recovery by annealing.     

Remote detection of a tonal anomaly in an area of hydrocarbon microseepage,Tucano basin,north-eastern Brazil

Mapping of a tonal anomaly in an area of hydrocarbon microseepage was possible using a Landsat-Thematic Mapper false-colour composite consisting of TM2/3, TM4/3 and of the difference TM2/3-TM4/3, displayed as red, green and blue, respectively. In this false-colour composite, green and yellow express variations in the vegetation cover, whereas hues of magenta are related to terrain conditions representing bleached materials, which occur close to the centre of a soil gas anomaly. Simultaneous occurrence of anomalous soil gas values with magnetic and radioactive minerals suggests that a reducing environment associated with the microseepage phenomenon created the bleached materials, identified as a tonal anomaly in the enhanced TM image.     

Explanation of impact load curve in ball impact test in relation to thermal aging

Solder joints are required to have high impact strength for use in portable electronic products. To make solder joints with high impact strength, qualitative evaluation methods of impact strength are required. Ball impact tests have been widely adopted in evaluating the impact strength of solder joints because of their easy implementation. Impact load curves obtained from ball impact tests are used as an evaluation indicator of impact strength of solder joint. However, a relation between fracture behavior and impact load curve has not yet been clarified, and an explanation of the impact load curve has not yet been provided in detail. In addition to this, detailed study about the relation between IMC layer thickness and impact strength has not been performed, although the IMC layer thickness formed at the interface would significantly affect the impact strength of the solder joint. This study aimed to explain the impact load curve in the ball impact test and to reveal the effect of the IMC layer thickness on the impact strength of the solder joint. Sn–3.0Ag–0.5Cu solder was reflowed on an electroless Ni–P plated Cu substrate (Ni–P), and a ball impact test was then carried out to evaluate the impact strength. This study found that the ball impact test is effective to evaluate the interfacial strength of solder joints. In the impact load curve, it is estimated that the solder bump keeps deforming until the interfacial crack initiates (maximum load), and the interfacial crack initiates after the maximum load and propagates along the interface between the solder and Ni–P. The suitable evaluation of impact strength became possible by measuring the correspondence relation between the deformation distance of the solder bump after fracture and the energy until maximum load and the relation between the area fraction of the residual solder on the fractured pad and the energy after maximum load. And, it is proved that the impact strength decreased with increasing aging time because the growth of the IMC layer remarkably degraded the interfacial strength of the solder joint.     

Deep-submicrometer large-angle-tilt implanted drain (LATID)technology

Deep-submicrometer large-angle-tilt implanted drain (LATID) technology is described. It is found by Monte Carlo process simulation and SIMS measurements that a sufficiently long n^- region can be formed under the gate by taking advantage of large-angle-tilt implant and successfully without ion channeling by taking care of the implant direction. A design that offsets the n⁺ implant by sidewall spacers to suppress the n⁺-gate overlap to zero while keeping the n^- region fully overlapped with the gate is found to be crucial for improved performance and reliability. The device performance, such as current drivability and short-channel effects, is described, and the circuit speed is investigated. Hot-carrier effects such as lateral electric field and device lifetime over a wide range of drain structures are also investigated. The tradeoff between device performance and hot-carrier reliability in deep-submicrometer LATID FETs is discussed