Improved direct bonding method of Nd:YVO4 and YVO4 laser crystals

We succeeded in the fabrication of bonded laser crystals composed of a neodymium-doped YVO₄ laser crystal (Nd:YVO₄) and its host crystals YVO₄ by a newly developed dry etching technique using an argon ion beam. The optical distortion caused by the bonded interface of size 5 mm × 6 mm was estimated to be 0.05λ at 633 nm. From the comparison of laser performance pumped by a laser diode, the bonded crystals could increase the laser output power by nearly twice that of the non-bonded crystals with the same degree of polarization of 99.2%. To analyze the mechanism of the enhanced reduction of the thermal load in the bonded crystals, numerical simulations with a finite-element method were also performed.     

Plastic deformation of bcc metal thin foils without dislocation

Heavy plastic deformation of fcc metal thin foils to fracture has been found recently to proceed without involving dislocations, and it results in the formation of high density of vacancy clusters. Thin foil specimens of bcc metals such as V and Mo were plastically deformed to fracture in in situ elongation experiments under an electron microscope. Morphology of thinning and fracture was found to be similar to fcc metals, and no dislocation was observed during heavy deformation. Electron diffraction analysis at the tip of a crack during deformation confirmed a large elastic deformation of up to 5%. Unlike in fcc metal thin foil specimens, point defect clusters were not observed near fractured tips. This difference is attributed to the difference in vacancy reaction, though the deformation in bcc metals without dislocation most likely does produce vacancies.     

Dynamics of Vortex Lattice Formation in a Rotating Bose-Einstein Condensate with an Optical Lattice Potential

We study dynamics of quantized vortex lattice formation in a rotating Bose-Einstein condensate with a square blue-detuned optical lattice by solving the Gross-Pitaevskii equation. This dynamics depends on the depth of the optical lattice. Vortices tend to form a triangular lattice under the rotation, while an optical lattice likes to pin vortices at their peaks. Such a competition of two effects makes this system more interesting and complicated.     

A reconfigurable VLSI-based double-lens tracking camera

Watching and tracking an object while seeing a much wider view is one of advantages of the eye system. We proposed and developed a tracking camera system that mimics the eyes by using double-lens modules. In the system, a wide view is captured through the wide-lens module, while the target in it is tracked and magnified through the telescopic lens module. Electronic circuits for tracking control are implemented onto the reconfigurable VLSI or FPGA in order to embed the parallelism in the tracking algorithm into the hardware. A successfully developed FPGA-based prototype performs high-speed tracking at the video-rate. This work was present in part at the 12th International Symposium on Artificial Life and Robotics, Oita, Japan, January 25–27, 2007     

Sintering of the Mechanochemically Activated Powders of Hexagonal Boron Nitride

Pressureless sintering of hexagonal boron nitride (BN) was performed using a powder activated by mechano-chemical treatments. Physical properties of the sintered BN bodies depend on the type of starting powder and the conditions of the treatments. The BN body, which was obtained at 2000°C using an appropriate activated powder, was 99 wt% pure and was excellent in mechanical and physical properties, in spite of its low density (1.64 g/cm³).     

Evolvable Reasoning Hardware: Its Prototyping and Performance Evaluation

In this paper, we propose evolvable reasoning hardware and its design methodology. In the proposed design methodology, case databases of each reasoning task are transformed into truth tables, which are evolved to extract rules behind the past cases through a genetic algorithm. Circuits for the evolvable reasoning hardware are synthesized from the evolved truth-tables. Parallelism in each task can be embedded directly in the circuits through the direct hardware implementation of the case databases. We developed the evolvable reasoning hardware prototype using Xilinx Virtex FPGA chips and applied it to the English-pronunciation-reasoning (EPR) task. The evolvable reasoning hardware for the EPR task was implemented with 270K gates, achieving an extremely high reasoning speed of less than 300 ns/phoneme. It also achieved a reasoning accuracy of 82.1% which is almost the same accuracy as NETTalk in neural networks and MBRTalk in parallel AI.     

Dislocation structures introduced by high-speed deformation in bcc metals

Systematic experiments were carried out over a wide range of strain rate, 10⁰–10⁶ s⁻¹, so as to reveal the deformation mode in bcc crystals, especially at high strain rate. Dislocation structure showed heterogeneous distribution at low strain rates in all three bcc metals examined. At higher strain rates exceeding 10³ s⁻¹, distribution of dislocations was random, and the formation of small dislocation loops was observed in V and Nb. In Mo, small dislocation loops were not formed by deformation, even at high strain rates. However, post-deformation annealing of an Mo specimen that had been deformed by 20% at 5×10⁵ s⁻¹ produced dislocation loops. The inside–outside contrast method identified these loops to be of vacancy type. These results reveal that in Mo vacancy clusters are not formed directly from the interaction of dislocations, but by the aggregation of vacancies. In V and Nb, the same formation process is believed to occur at high strain rates. These results suggest that the different mode of plastic deformation at high strain rates accompanied by production of vacancies also occurred in bcc metals.     

MOCVD preparation of SBTN thin films from two organometallic sources bottles

Abstract

SrBi₂(Ta_0.7Nb_0.3)₂O₉ (SBTN) films were first prepared on (111)Pt/Ti/SiO₂/Si substrates by MOCVD from only two organometallic source bottles. Bi(CH₃)₃ and the mixture of Sr[Ta(O°C₂H₅)₆]₂ and Sr[Nb(O°C₂H₅)₆]₂ were used as source materials. High compositional reproducibility was obtained; the Nb/(Ta+Nb) ratio was the same as the mixing ratio of the source. Sr/(Ta+Nb) and Bi/(Ta+Nb) ratios can be controlled by the reactor pressure and the input gas flow rate ratio of the source gases. Almost single phase of SBTN was obtained for the film deposited at 500°C and the following heat-treated at 800°C in O₂ atmosphere. Pr and Ec values of 330 nm-thick SBTN film were 8.5 μC/cm² and 91 kV/cm, respectively and were larger than those of SrBi₂Ta₂O₉ film. There was no degradation after 5x10¹⁰ cycles polarization switching.     

Accumulation and elimination profiles of paralytic shellfish poison in the short-necked clam Tapes japonica fed with the toxic dinoflagellate Gymnodinium catenatum

The paralytic shellfish poison (PSP)-producing dinoflagellate Gymnodinium catenatum (Gc) was fed to the short-necked clam Tapes japonica, and the accumulation, transformation and elimination profiles of PSP were investigated by means of high-performance liquid chromatography with postcolumn fluorescence derivatization (HPLC-FLD). The short-necked clams ingested most of the Gc cells (4 x 10(6) cells) supplied as a bolus at the beginning of the experiment, and accumulated a maximal amount of toxin (181 nmol/10 clams) after 12 hr. The rate of toxin accumulation at that time was 16%, which rapidly decreased thereafter. During the rearing period, a variation in toxin composition, derived presumably from the transformation of toxin analogues in the clams, was observed, including a reversal of the ratio of C2 to C1, and the appearance of carbamate (gonyautoxin (GTX) 2, 3) and decarbamoyl (dc) derivatives (decarbamoylsaxitoxin (dcSTX) and dcGTX2, 3), which were undetectable in Gc cells. The total amount of toxin contained in clams and residue (remaining Gc cells and/or excrement in the rearing tank) gradually declined, and only about 1% of the supplied toxin was detected at the end of the experiment.     

Inactivation of Bacillus spores by the combination of moderate heat and low hydrostatic pressure in ketchup and potage

The combination effect of moderate heat and low hydrostatic pressure (MHP) on the reduction of Bacillus subtilis, Bacillus coagulans and Geobacillus stearothermophilus spores in food materials (potage and ketchup) was investigated. These bacterial spores were suspended in potage (pH 7), acidified potage (pH 4), neutralized ketchup (pH 7) and ketchup (pH 4). The suspensions were treated with and without pressure (100 MPa) and temperatures of 65-85 degrees C for 3 to 12 h. The bacterial spores were inactivated by 4-8 log cycles during MHP treatment in potage, acidified potage and ketchup, whereas the spores were highly resistant to long time heat treatment in potage and neutralized ketchup. The degrees of spore destruction were mostly dependent on pH and medium composition during MHP treatment. The inactivation effect in MHP treatment was higher at the pH 7 than at pH 4 both in ketchup and potage. The bacterial spores showed higher inactivation in potage than ketchup during MHP treatment.