Possible anatomical basis of recovery of function after neonatal frontal lesions in rats.

Rats given medial frontal lesions on Postnatal Day 1 or Day 10 were trained on the Morris water task on Days 19–21 or Days 56–58. The operated groups were equally impaired at the water task on Days 19–21, but the Day 10 rats had recovered by 56 days. Dendritic arborization and spine density were analyzed in parietal layer II–III pyramidal cells. At Day 60, but not at Day 22, the Day 10 animals had more dendritic spines per unit dendritic length than did the controls or Day 1 rats. Thus, there was functional recovery rather than sparing after frontal lesions at 10 days, and the recovery was correlated with an increase in dendritic spines. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The Effects of H2O, CO and CO2 on the H2 Permeance and Surface Characteristics of 1 mm Thick Pd80wt%Cu Membranes

The hydrogen permeance of 1 mm-thick Pd_80wt%Cu foils was measured in the presence of equimolar mixtures of H₂ with CO, CO₂ or H₂O over the temperature and total pressure ranges of 623–1,173 K and 0.62–2.86 MPa, respectively. In all cases, permeance losses at 623 and 738 K were very modest. At higher temperatures, more significant decreases in membrane permeance were observed with the highest reduction of about 50% occurring when macroscopic carbon deposition occurred on the membrane surface during H₂–CO exposure at 908 K. The more worrisome effects of exposure to these gases, however, were the micron-scale surface defects observed at 908 and 1,038 K. Although the 1 mm thick disk membranes retained their mechanical integrity, such defects could cause catastrophic failure of ultra-thin, Pd–Cu membranes (1–5 μm thick) deposited on porous substrates.     

Refinements in validity generalization methods: Implications for the situational specificity hypothesis.

Using a large database, this study examined 3 refinements of validity generalization procedures: (1) a more accurate procedure for correcting the residual standard deviation (SD) for range restriction to estimate SDp, (2) use of r? instead of study-observed rs in the formula for sampling error variance, and (3) removal of non-Pearson rs. The 1st procedure does not affect the amount of variance accounted for by artifacts. The addition of the 2nd and 3rd procedures increased the mean percentage of validity variance accounted for by artifacts from 70 to 82%, a 17% increase. The cumulative addition of all 3 procedures decreased the mean SDp estimate from .150 to .106, a 29% decrease. Six additional variance-producing artifacts were identified that could not be corrected for. In light of these it was concluded that the obtained estimates of mean SDp and mean validity variance accounted for were consistent with the hypothesis that the true mean SDp value is close to zero. These findings provide further evidence against the situational specificity hypothesis. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Mechanisms in damping of mechanical vibration by piezoelectric ceramic-polymer composite materials

The piezoelectric ceramic (piezoceramic) component of a polymer-piezoelectric ceramic composite converts mechanical energy into electrical energy and this electrical energy is dissipated as heat in a load resistance, R _x, simulated by a shunted resistance, but provided in practice by a conductive polymer composite matrix. The composite therefore dissipates the input mechanical energy via the damping mechanism provided by piezoelectric ceramic-conductive matrix material, as well as the conventional viscoelastic damping provided by the polymer. Mathematical models have been developed to characterize the damping behaviour of the composites, and the maximum damping ratio of composites can be as high as 23%. A two degrees-of-freedom (2DOF) experimental setup was developed to test the validity of the models. The experimental results are in good agreement with the theoretical predictions.     

Gheo-shih: an ancient pre-Columbian plaza

This paper describes the configuration and cultural context of the oldest known designed space in central America, Gheo-Shih, dating from 5,000 - 4,000 BC. This site may have been a ceremonial space, being employed in a similar fashion to ceremonial spaces of Native American cultures from the North American Great Basin. It contains physical features that set precedents and are similar to the geomantic features of later nearby Mesoamerican cultures.     

Dissolution Behavior of Griseofulvin Solid Dispersions Using Polyethylene Glycol, Talc, and Their Combination as Dispersion Carriers

Griseofulvin solid dispersions were prepared using polyethylene glycol 6000 (PEG), talc, and their combination as carriers by the solvent method. The dissolution of griseofulvin from these dispersions was studied. It was found that in these carriers the drug dissolution rate was a function of drug loading. The dissolution rate from dispersions prepared using PEG was similar to that from PEG/talc dispersions, especially at a low percentage of drug loading. Dispersions of PEG and PEG/talc provided dissolution rates faster than those from dispersions of talc. The incorporation of talc in PEG yielded dispersions with properties of less tackiness and ease for handling. Dissolution kinetics, based on the Hixson-Crowell equation, was used to determine the characteristics of griseofulvin particles in dispersions. Linear relationships were obtained for PEG and PEG/talc dispersions that indicated the presence of a uniformly sized monoparticulate system, whereas deviation from linearity was observed for talc dispersions. This appeared to be a multiparticulate system in which particles were present as free form and adsorbed form on the surface of talc.     

Identification and characterization of the murine homologue of CD22, a B lymphocyte-restricted adhesion molecule

The human B lymphocyte-specific Ag, CD22, is a cell adhesion molecule expressed on the surface during a narrow window of B cell development, coincident with surface IgD. A ligand for CD22 has recently been identified on human T cells as the low molecular mass isoform of the leukocyte common Ag, CD45RO. CD22 has been reported to function in the regulation of both T and B cell activation in vitro. In this study, we report the isolation and expression of a molecular cDNA clone encoding the murine homologue of CD22, mCD22. Within their predicted protein sequences, murine and human sequences overall have 62% identity, which includes 18 of 20 extracellular cysteines and six of six cytoplasmic tyrosines. BHK cells transfected with mCD22 cDNA specifically adhere to resting and activated T lymphocytes and in addition bound activated, but not resting, B cells. Five Th clones were analyzed for their ability to adhere to mCD22; two Th0 clones and one Th1 clone bound CD22+ BHK transfectants, but not all T cell clones bound CD22+ cells: another Th1 clone and a Th2 clone did not. mCD22+ BHK transfectants were also specifically bound by the B cell-specific mAb, NIM-R6, demonstrating that this mAb is specific for murine CD22. Human cell lines expressing the counter-receptors for human CD22 were also examined for adhesion to the murine CD22 homologue; the epitope responsible for B cell adhesion to CD22 is conserved, whereas the T cell epitope binding to CD22 is not. The cDNA and mAb to murine CD22 will be useful for defining the in vivo function of CD22.     

Measurements of turbulent mass transport of a circular wall jet

The results of a laboratory investigation on the turbulence characteristics of a circular three-dimensional turbulent wall jet are presented. Measurements were taken up to 50 nozzle diameters using combined particle image velocimetry and planar laser induced fluorescence. The results showed that the induced turbulence was still evolving in the present range and had not achieved similarity. While the turbulent intensity for both velocity and concentration increased downstream, the turbulent mass transport showed a decline over distance for both the streamwise and spanwise directions, implying weakening dispersion from the jet core.     

Influence of lattice self-heating and hot-carrier transport ondevice performance

As device technologies improve, the traditional drift-diffusion transport model becomes inadequate to predict the performance of state-of-the-art semiconductor devices. The reasons are believed to be the larger field and field gradient inside advanced devices which cause lattice heating and hot carrier nonlocal transport phenomena. For more accurate prediction on device performance, a new device simulator capable of full thermodynamic simulation was developed. The carrier and carrier energy transport equations are directly derived from the Boltzmann transport equation, and the energy transfer among electrons, holes and crystal lattice takes into account most of the possible mechanisms. This simulator was used to simulate the DC behavior of a BJT and a half-micron NMOS. The simulation results show that for advanced devices, not only the drift-diffusion model becomes inadequate, but including only one of the two thermal effects results in error in simulated device characteristics     

A simple SCC specimen incorporating heat transfer with a crevice or deposits

A simple stress-corrosion cracking (SCC) specimen, suitable for slow strain rate testing and incorporating heat transfer, with an artificial crevice or deposits has been designed and tested. It appears that when the solute level is above a certain value it can concentrate. The kinetics of solute accumulation and the concentration that can be induced in the specimen have been determined. Build up of solute from the ppm level in the bulk environment to the level required to cause cracking can take hours, not days or years. The limiting concentration reached is controlled by thermodynamics, specifically the available superheat. A brief review of relevant literature suggests that this experimental approach to predicting SCC has significant advantages over a modelling or measurement approach. The specimen also lends itself to a monitoring role--a modern version of the Schroeder embrittlement detector.