In-laboratory removal of femoral sheath following protamine administration in patients having intracoronary stent implantation

Two hundred twenty-eight patients with successful coronary stent implantation were randomized either to protamine administration and femoral sheath removal (group I, n = 117) or no heparin neutralization and delayed sheath removal (group II, n = 111). The hospital stay after treatment was shorter in patients receiving protamine; therefore, protamine use for neutralizing circulating heparin may be safely administered immediately after stent implantation.     

Effect of chromium content on remarkably rapid nitriding in austenitic Fe-Ni-Cr alloys

Remarkably rapid nitriding which is independent of diffusion theory based on the thermal activation process, was observed during nitriding of austenitic Fe-Ni-Cr steels containing 16 and 19 mass% chromium. Increase of the chromium content in the alloys yielded increasing thickness of the nitrided layer, i.e. the internal nitriding theory did not hold in the nitriding. No rapid nitriding was observed in steels containing less than 13 mass% chromium. Hence the limiting concentration of chromium for the rapid nitriding will lie between 13 and 16 mass% chromium. A solution to the problem of abnormalities arising during nitriding of practical austenitic stainless steels which have been investigated since 1972, has been presented experimentally by nitriding various chromium-containing steels. Based on the experimental results, the origin of the rapid nitriding is discussed in connection with the free-energy function of Cr₂N and CrN to temperature. In particular, a plateau of nitrogen concentration measured in the nitrided layers leads to the conclusion that a forced nitrogen diffusion in the layer resulted in the rapid nitriding.     

Cathepsin L2, a novel human cysteine proteinase produced by breast and colorectal carcinomas

We have identified and cloned a new member of the papain family of cysteine proteinases from a human brain cDNA library. The isolated cDNA codes for a polypeptide of 334 amino acids that exhibits all of the structural features characteristic of cysteine proteinases, including the active site cysteine residue essential for peptide hydrolysis. Pairwise comparisons of this amino acid sequence with the remaining human cysteine proteinases identified to date showed a high percentage of identity (78%) with cathepsin L; the percentage of identity with all other members of the family was much lower (<40%). On the basis of these structural characteristics, we have tentatively called this novel protein cathepsin L2. The cDNA encoding the mature cathepsin L2 was expressed in Escherichia coli, and after purification, the recombinant protein was able to degrade the synthetic peptide benzyloxycarbonyl-L-phenylalanyl-L-arginine-7-amido-4-methylcoumarin, which is commonly used as a substrate for cysteine proteinases. Cathepsin L2 proteolytic activity on this substrate was abolished by trans-epoxysuccinyl-L-leucylamido-(4-guanidino)butane, an inhibitor of cysteine proteinases, thus providing additional evidence that the isolated cDNA encodes a functional cysteine proteinase. Northern blot analysis of polyadenylated RNAs isolated from a variety of human tissues demonstrated that cathepsin L2 is predominantly expressed in the thymus and testis. This finding is in marked contrast with the wide tissue distribution of most cysteine proteinases characterized to date, including cathepsin L, and suggests that cathepsin L2 may play a specialized role in the thymus and testis. Expression analysis of cathepsin L2 in human tumors revealed a widespread expression in colorectal and breast carcinomas but not in normal colon or mammary gland or in peritumoral tissues. Cathepsin L2 was also expressed by colorectal and breast cancer cell lines as well as by some tumors of diverse origin, including ovarian and renal carcinomas. These results open the possibility that this novel enzyme may be involved in tumor processes, as already reported for other cysteine proteinases, including cathepsin L.     

Pervaporation of 50 wt % ethanol–water mixtures with poly(1‐trimethylsilyl‐1‐propyne) membranes at high temperatures

Poly(1‐trimethylsilyl‐1‐propyne) (PTMSP) membranes have been used to separate ethanol–water mixtures by pervaporation. This polyacetylene is known to present high affinity toward ethanol, showing high selectivity and ethanol permeation flux. The performance of this polymer in the separation of alcohol–water solutions has been evaluated over long periods (572 h) at a high temperature (75°C) to examine the deterioration of the transport properties in the separation of 50 wt % ethanol–water solutions. Although PTMSP membranes present good characteristics for the separation of gases and liquid mixtures, their organic selectivity decrease with the operating time because of the relaxation processes of the polymeric chains, which affect the free volume of the polymer, the deterioration being more evident for concentrated solutions. The effects of the operation temperature on the characteristic parameters of pervaporation have also been studied to establish how this variable affects the performance of PTMSP membranes. The selectivity increases slightly with the operation temperature, but the effect of the temperature on the separation factor decreases as membranes are degraded with the operation time. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2843–2848, 2007     

Blocking the Routes to Triviality with Depth Relevance

In Rogerson and Restall’s (J Philos Log 36, 2006, p. 435), the “class of implication formulas known to trivialize (NC)” (NC abbreviates “naïve comprehension”) is recorded. The aim of this paper is to show how to invalidate any member in this class by using “weak relevant model structures”. Weak relevant model structures verify deep relevant logics only.     

Synthesis of deuterated cyclopropene fatty esters structurally related to palmitic and myristic acids

To develop a synthesis of tritiated cyclopropene fatty acids (CPFA), compounds that should prove useful for affinity labeling of desaturases in insect pheromone biosynthetic studies, a series of novel, selectively deuterated CPFA analogues was prepared and characterized. In methyl [16-²H]12,13-methylene-12-hexadecenoate, the incorporation of deuterium was achieved by treatment of the corresponding ω-chloro derivative with sodium borodeuteride in dimethylsulfoxide at 70°C for 24 h (67% yield) following conventional procedures. Alkylation of the tetrahydropyranyl derivative of 13-tridecynol in the presence of lithium diisopropylamide in tetrahydrofuran at −20°C with 1-chloro-3-iodopropane in hexamethylphosphoramide, followed by Jones oxidation of the crude product, yielded 16-chloro-12-hexadecynoic acid (54%), which was esterified to the corresponding methyl ester by treatment with potassium carbonate and methyl iodide in dimethylformamide. Treatment of this acetylenic ester with ethyldiazoacetate in the presence of activated copper-bronze as catalyst followed by hydrolysis in KOH solution at room temperature yielded 16-chloro-12,13-(carboxymethylene)-12-hexadecenoic acid. This diacid was treated with excess oxalyl chloride to give the corresponding diacyl chloride, which was decarbonylated in a diethyl ether solution with zinc chloride, and the cyclopropenium ions thus formed were added at −40°C to a methanolic sodium hydroxide solution of sodium borohydride to give methyl 16-chloro-12,13-methylene-12-hexadecenoate. Analogous procedures were followed to prepare methyl [17-²H]10,11-methylene-10-hexadecenoate, methyl [17-²H]11,12-methylene-11-hexadecenoate and methyl [17-²H]12,13-methylene-12-hexadecenoate from the corresponding diacids using sodium borodeuteride in the reduction of the cyclopropenium ions. Alternatively, methyl [2,2,3,3-²H₄]hexadecynoate, prepared by reaction of methyl 2,11-hexadecadiynoate with magnesium in deuterated methanol at room temperature, was submitted to the above cyclopropenylation and reductive decarbonylation sequence to give methyl [2,2,3,3,17-²H₅]-11,12-methylene-11-hexadecenoate. In summary, complementary methods for the selective incorporation of one to five deuterium atoms into cyclopropene fatty acids, at different sites, in moderate to high yields have been developed. The methods should easily be applicable to the preparation of the corresponding tritiated analogues.     

Classification of vegetable oils by high-resolution <Superscript>13</Superscript>C NMR spectroscopy using chromatographically obtained oil fractions

¹³C NMR spectra of oil fractions obtained chromatographically from 109 vegetable oils were obtained and analyzed to evaluate the potential use of those fractions in the classification of vegetable oils and to compare the results with the NMR analysis of complete oils. The oils included the following: virgin olive oils from different cultivars and regions of Europe and north Africa; “lampante” olive, refined olive, refined olive pomace, hazelnut, rapeseed, high-oleic sunflower, corn, grapeseed, soybean, and sunflower oils; and mixtures of virgin olive oils from different geographical origins. Oils were divided into two sets of samples. The training set (98 samples) was employed to select the variables that resulted in significant discrimination among the different oil classes. By using stepwise discriminant analysis, more than 98% of correct validated assignments were obtained; these results were confirmed when applied to the test set (11 blind samples). Results suggest that the use of oil fractions considerably increases the discriminating power of NMR in the analysis of vegetable oils.     

Characterization of yam bean (Pachyrhizus spp.) Seeds as potential sources of high palmitic acid oil

Seeds from 22 accessions of the yam bean species Pachyrhizus ahipa (14 accessions), P. erosus (5), and P. tuberosus (3) were investigated for oil and protein contents, fatty acid composition of the seed oil, and the total tocopherol content and composition. Plants from the accessions were grown under greenhouse conditions during one (P. erosus and P. tuberosus) or two years (P. ahipa). The pattern of the investigated seed quality traits was very similar in the three species. Yam bean seeds were characterized by high oil (from about 20 to 28% in one environment) and protein contents (from about 23 to 34%). Seed oil contained high concentrations of palmitic (from about 25 to 30% of the total fatty acids), oleic (21 to 29%), and linoleic acids (35 to 40%). Levels of linolenic acid were very low, from about 1.0 to 2.5%. Total tocopherol content was relatively low in P. erosus (from 249 to 585 mg kg⁻¹ oil) and P. tuberosus (from 260 to 312 mg kg⁻¹ oil) compared with the levels found in P. ahipa grown under identical conditions (508 to 858 mg kg⁻¹ oil). In all the samples, γ-tocopherol was predominant, accounting for more than 90% of the total tocopherol content. The combination of high oil and protein contents, together with high palmitic acid, low linolenic acid, and high γ-tocopherol concentration, makes these crops an interesting alternative as sources of high palmitic acid oil for the food industry.