Synthesis and characterization of conducting copolymers from aniline and o‐anisidine in HCl solutions

Conducting poly(aniline‐co‐o‐anisidine) (PAS) films with different ratios of aniline units in the polymer chain were prepared by oxidative polymerization of different molar ratios of aniline and o‐anisidine in 1 M HCl using cyclic voltammetry. Due to the much higher reactivity of o‐anisidine, the structure and properties of PASs were found to be dominated by the o‐anisidine units. The polymerization of poly‐o‐anisidine and PASs followed zero‐order kinetics with respect to formation of the polymer (film thickness) and the autocatalytic polymerization of aniline was completely inhibited. In contrast to polyaniline, a decrease in the polymerization temperature was found to increase the amount of copolymer formed and its redox charge. The presence of aniline units in PASs led to a pronounced increase in the molecular weight and conductivity, and a decrease in the solubility in organic solvents. Repetitive charging/discharging cycles showed that PASs resist degradation more than polyaniline. Copyright © 2003 Society of Chemical Industry     

Fabrication of 1.55 μm VCSELs on Si using metallic bonding

Using AuGeNiCr multilayered metals as the wafer bonding medium, long-wavelength GaInAsP/InP vertical cavity surface emitting lasers employing Al-oxide/Si as the upper and lower distributed Bragg reflectors were fabricated on Si substrate with the bonding interface formed outside the vertical cavity surface emitting laser cavity. Laser emission at 1.545 μm was measured under pulsed operations near room temperature. The low-temperature metallic bonding process demonstrates a great potential in device fabrication     

The effect of topical corticosteroids on refractive outcome and corneal haze after photorefractive keratectomy

BACKGROUND: The effect of topical corticosteroids after excimer laser photorefractive keratectomy (PRK) remains a matter of some controversy. Refractive effects may be different according to the amount of myopia and timing of instillation. METHODS: Two groups of patients were studied: Study A consisted of 215 eyes (128 patients) with PRK (mean baseline myopia, -6.53 +/- 2.22 D) that received no corticosteroids (No Corticosteroid Group) unless significant regression or corneal haze appeared (Delayed Corticosteroid Group), and in Study B, we randomly assigned eyes to the Initial Corticosteroid Group (mean baseline myopia, -6.39 +/- 1.84 D) or the No/delayed Corticosteroid Group (mean baseline myopia -5.78 +/- 2.02 D). Clinical results after PRK for low-to-moderate and high myopia were compared. RESULTS: In the first group, 70.9% (73 eyes) of moderately myopic eyes (mean, -4.56 +/- 1.10 D) belonged to the No Corticosteroid Group that had a mean refraction of -5.39 +/- 1.77 D. Delayed Corticosteroid Group eyes were more myopic (mean, -7.52 +/- 2.10 D), and showed more severe haze than those in the No Corticosteroid Group. In study B, only in high myopes with more than -6.00 D (mean, -7.76 +/- 1.15 D) did refraction and corneal haze outcomes show significant difference between the Initial Corticosteroid Group and the No/delayed Corticosteroid Group. CONCLUSIONS: The effects of topical corticosteroids after PRK were less in moderate myopes compared to high myopes. Delayed instillation of corticosteroids did not reverse the regression or haze whereas initial instillation showed a beneficial effect on high myopes but not on moderate myopes.     

The band areas of proteins determined by fluorescent scanning in the commercial automated gel electrophoresis apparatus

An automated gel electrophoresis apparatus, recently available commercially, allows one to follow the band during electrophoresis in real time, and lends itself therefore to an evaluation of bandwidth as a function of migration time (the dispersion coefficient), resolution and band shape. These determinations assume the constancy of band area with migration time and at various gel concentrations. The purpose of the present study was to verify these assumptions. Representative proteins and sodium dodecyl sulfate (SDS)-proteins, either natively fluorescent or fluorescein carboxylate labeled, were found to exhibit band areas which approach constancy as a function of migration time in both agarose and polyacrylamide gel electrophoresis, provided that (i) the protein concentration under the band was low enough to obviate self-quenching of fluorescence; (ii) the separation of the protein of interest from contaminants had progressed sufficiently during the time at which band areas were measured; (iii) the baseline under the peak was sufficiently well defined. However, band areas decrease with increasing gel concentration. Protein peaks exhibited leading and trailing tails. The ratio of the combined tail area to total area appeared to be near-constant at varying migration times. However, that ratio increases with increasing gel concentration. The tail area does not appear to be an artifact of fluorometric detection since it is reproduced upon fluorimetric analysis of the protein eluted from gel slices after electrophoresis. However, it may be due to photochemical destruction under the conditions of repetitive fluorometric peak detection.     

Electrical conductivity of ferroelectric sodium vanadate,rubidium vanadate,cesium vanadate and their solid solutions

The d.c. electrical conductivity of sodium vanadate, rubidium vanadate, cesium vanadate and their solid solutions sodium-rubidium vanadate and sodium-cesium vanadate were studied by a two-probe method in the temperature range covering their transition points. The electrical conductivity shows sharp change at the phase transition temperature of these materials. In NaVO₃, RbVO₃ and CsVO₃, increase in d.c. conductivity is observed in the ferroelectric region while nonlinearities are observed above transition temperatures. In solid solutions, the activation energy in the paraelectric state is higher than that in the ferroelectric state and depends upon sodium concentration.     

Enhancement of islanding-detection of distributed generation systems via wavelet transform-based approaches

In this paper, a wavelet transform-based approach is proposed to detect the occurrence of islanding events in distributed generation systems. Thanks to time–frequency localization capabilities exhibited by wavelet transform, the approach embedded with this transform technique has grasped the appearance of the islanding event in a highly effective manner. Moreover, for those regions which are in need of a better visualization, the proposed approach would serve as an efficient aid such that the mains power disconnection can be better distinguished. To validate the feasibility of this approach, the method has been validated through several scenarios. Test results supported the effectiveness of the method for the application considered.     

Metabotropic glutamate receptors are involved in long-term potentiation in isolated slices of rat medial frontal cortex

The prelimbic region of medial frontal cortex in the rat receives a direct input from the hippocampus and this functional connection is essential for aspects of spatial memory. Activity-dependent changes in the effectiveness of synaptic transmission in the medial frontal cortex, namely long-term potentiation (LTP) and long-term depression (LTD) can persist for tens of minutes or hours and may be the basis of learning and memory storage. Glutamatergic activation of ionotropic receptors is required to induce both LTP and LTD. We now present evidence of the involvement of metabotropic glutamate receptors in LTP in isolated slices of frontal cortex. Repetitive bursts of stimulation at theta frequencies (TBS) were applied to layer II, and monosynaptic EPSPs were monitored in layer V neurons of the prelimbic area. TBS was found to be more effective at inducing LTP than tetanic stimulation at 100 Hz and produced LTP that lasted >30 min in 8 out of 14 neurons. Tetanic stimulation at 100 Hz in the presence of the N-methyl--aspartate (NMDA)-antagonist 2-amino-5-phosphonopentanoate (AP5) was reported to be a reliable method of inducing LTD in prelimbic cortex (). However we found that this protocol did not facilitate the induction of LTD. The role of metabotropic glutamate receptors (mGluR) in LTP was assessed by using the selective, broad-spectrum antagonist (R, S)-alpha-methyl-4- carboxyphenylglycine (MCPG). This drug significantly reduced the incidence of LTP after TBS to only 1 of 14 neurons (P < 0.02, chi2 test). The pooled responses to TBS in MCPG showed significantly reduced potentiation [(P < 0.02, analysis of variance (ANOVA)]. The broad-spectrum mGluR agonist (1S, 3R)-1-aminocyclopentane-1,3-dicarboxylic acid (ACPD) and the selective group I agonist S-3 hydroxyphenylglycine(S-3HPG) both produced membrane depolarization, an increase in number of spikes evoked by depolarizing current pulses, and a reduction in the afterhyperpolarization. Similar effects were produced by these agonists even when synaptic transmission was blocked by use of the gamma-aminobutyric acid-B (GABAB) receptor agonist, 200 microM baclofen, which suggests that group I mGluRs are present on layer V neurons. We conclude that mGluRs participate in the production of LTP in prelimbic cortex, and that this excitatory effect could be mediated by the postsynaptic group I mGluRs.     

Enhanced electron emission from phosphorus-doped diamond-cladsilicon field emitter arrays

Undoped and phosphorus (P)-doped diamond-clad Si field emitter arrays have been successfully fabricated using microwave plasma chemical vapor deposition (MPCVD) technology. The electron emission from the blunt diamond-clad microtips are much higher than those for the pure Si tips with sharp curvature due to a lower work function. Furthermore, the characteristics of emission current against applied voltage for the P-doped diamond-clad tips show superior emission at lower field to the undoped ones. After the examination of Auger electron spectroscopy (AES) and electrical characteristics of as-grown diamond, such a significant enhancement of the electron emission from the P-doped diamond-clad tips is attributed to a higher electron conductivity and defect densities     

Application of HUMF13A01 (AAAG)n STR polymorphism to the genetic diagnosis of coagulation factor XIII deficiency

Deficiency of the A subunit of coagulation factor XIII causes a severe bleeding disorder requiring life long replacement therapy. The mutations causing A subunit deficiency appear to be very heterogeneous, and it is impractical to identify each mutation before genetic counselling or prenatal diagnosis can be attempted. In this study we have shown that a highly polymorphic short tandem repeat element, HUMF13A01 (AAAG)n that occurs in the 5' flanking sequence of the factor XIII A subunit gene, can be used to follow the segregation of deficiency causing mutations. We studied 6 families with factor XIII A subunit deficiency from 5 different ethnic groups. All parents were heterozygous for the repetitive element and therefore all the families were informative. The linked polymorphism was used to carry out the first prenatal diagnosis of factor XIII A subunit deficiency. The analysis of this polymorphism by the polymerase chain reaction is rapid, reliable, requires little DNA and is ideal for the genetic analysis of factor XIII A subunit deficiency.     

The crystal structure of an Fe-superoxide dismutase from the hyperthermophile Aquifex pyrophilus at 1.9 A resolution: structural basis for thermostability

The incidence of stress fractures is increasing among competitive and recreational athletes as well as among children and the elderly. By understanding the continuum of bone's response to stress and maintaining an appropriate index of suspicion, the health care provider can diagnose these injuries appropriately. An accurate history and examination is essential and will differentiate stress fractures from other stress reactions. The more common stress fractures are discussed.