The effect of segment length on some properties of thermoplastic poly(ester–siloxane)s

A series of novel thermoplastic elastomers, based on poly(dimethylsiloxane) (PDMS) as the soft segment and poly(butylene terephthalate) (PBT) as the hard segment, were synthesized by catalyzed two‐step, melt transesterification reactions of dimethyl terephthalate and methyl esters of carboxypropyl‐terminated poly(dimethylsiloxane)s (M?_n = 550–2170 g mol^?1) with 1,4‐butanediol. The lengths of both the hard and soft segments were varied while the weight ratio of the hard to soft segments in the reaction mixture was maintained constant (57/43). The molecular structure, composition and molecular weights of the poly(ester–siloxane)s were examined by ¹H NMR spectroscopy. The effectiveness of the incorporation of the methyl‐ester‐terminated poly(dimethylsiloxane)s into the copolymer chains was verified by chloroform extraction. The effect of the segment length on the transition temperatures (T_m and T_g) and the thermal and thermo‐oxidative degradation stability, as well as the degree of crystallinity and hardness properties of the synthesized TPESs, were studied. Copyright © 2003 Society of Chemical Industry     

Synthesis of some fumaric acid polyamides from active diester monomers

Summary The solution polycondensation of two active diesters, bis(2,4-dinitrophenyl) fumarate and 1,1-(fumaroyldioxy)bis(benzotriazole), with a series of alphatic and aromatic diamines in N-methyl pyrolidone at room temperature, was investigated. The polycondensation reactions yielded a series of fumaric acids polyamides. The polymers obtained from aliphatic diamines were soluble in trifluroacetic acid and exhibited well-defined melting points. The polymers obtained from aromatic diamines are infusible at temperatures below 300°C but were thermally stable and soluble in dimethylacetamide containing 4% LiC1.     

Viscoelastic properties of poly(ε‐caprolactone)/clay nanocomposites in solid and in melt state

Viscoelastic properties in solid and in melt state of poly(ε‐caprolactone), PCL, nanocomposites with organomodified clays (Cloisite30B and Cloisite15A) are thoroughly investigated. Although WAXD is insensitive to the difference in the nanocomposites structure, the melt rheology reveals pronounced differences between the two series. Melt yield stress values, obtained from fittings by the Carreau–Yasuda model, are used as a measure of partial exfoliation of the clay. Temperature dependence of the shift factors, used for time–temperature superposition of the modulus curves, yields similar values of the flow activation energies for all the samples. Temperature dependences of the dynamic modulus and loss factor of solid nanocomposites were correlated to the structural differences deduced from the melt rheology. The increase in the storage modulus is compared to the theoretical predictions from the Halpin–Tsai model. The effective aspect ratio obtained from this comparison agrees reasonably with the value estimated from the melt rheology. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42896.     

G-quadruplex formation of oligonucleotides containing ALS and FTD related GGGGCC repeat

A largely increased number of GGGGCC repeats located in the non-coding region of C9orf72 gene have been identified as the leading cause of two related neurological disorders, familial amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD). We examined G-quadruplex forming ability of GGGGCCrepeat containing oligonucleotides with four guanine tracts chosen as the smallest possible model to form a unimolecular G-quadruplex. These oligonucleotides are readily to folded into G-quadruplexes in the presence of K⁺ ions. However, the formation of multiple structures makes structural analysis challenging and time consuming. We observed that flanking sequences on 5'- and 3'-ends as well as mutations of loop residues have a profound effect on folding. Sequence d[(G₄C₂)₃G₄] was chosen for further scrutiny and optimization of nuclear magnetic resonance (NMR) spectroscopic properties with dG to 8Br-dG substitutions at specific positions in the sequence under different folding conditions. Expectedly, folding into desired predominant topology is facilitated when substituted residue adopted a syn conformation in the naturally-occurring structure. Single dG to 8Br-dG substitution at position 21 and fine tuning of folding conditions facilitate folding of d[(G₄C₂)₃GG^BrGG] into (mostly) a single G-quadruplex, and thus enable determination of its high-resolution structure by high-field NMR.

Open image in new window

     

Glucagon-like Peptide-1 Receptor Agonists in the Management of Type 2 Diabetes Mellitus and Obesity: The Impact of Pharmacological Properties and Genetic Factors

Glucagon-like peptide-1 (GLP-1) receptor agonists are a new class of antihyperglycemic drugs that enhance appropriate pancreatic β-cell secretion, pancreatic α-cell (glucagon) suppression, decrease liver glucose production, increase satiety through their action on the central nervous system, slow gastric emptying time, and increase insulin action on peripheral tissue. They are effective in the management of type 2 diabetes mellitus and have a favorable effect on weight loss. Their cardiovascular and renal safety has been extensively investigated and confirmed in many clinical trials. Recently, evidence has shown that in addition to the existing approaches for the treatment of obesity, semaglutide in higher doses promotes weight loss and can be used as a drug to treat obesity. However, some T2DM and obese patients do not achieve a desired therapeutic effect of GLP-1 receptor agonists. This could be due to the multifactorial etiologies of T2DM and obesity, but genetic variability in the GLP-1 receptor or signaling pathways also needs to be considered in non-responders to GLP-1 receptor agonists. This review focuses on the pharmacological, clinical, and genetic factors that may influence the response to GLP-1 receptor agonists in the treatment of type 2 diabetes mellitus and obesity.     

TBP,PPIA, YWHAZ and EF1A1 Are the Most Stably Expressed Genes during Osteogenic Differentiation

RT-qPCR is the gold standard and the most commonly used method for measuring gene expression. Selection of appropriate reference gene(s) for normalization is a crucial part of RT-qPCR experimental design, which allows accurate quantification and reliability of the results. Because there is no universal reference gene and even commonly used housekeeping genes’ expression can vary under certain conditions, careful selection of an appropriate internal control must be performed for each cell type or tissue and experimental design. The aim of this study was to identify the most stable reference genes during osteogenic differentiation of the human osteosarcoma cell lines MG-63, HOS, and SaOS-2 using the geNorm, NormFinder, and BestKeeper statistical algorithms. Our results show that TBP, PPIA, YWHAZ, and EF1A1 are the most stably expressed genes, while ACTB, and 18S rRNA expressions are most variable. These data provide a basis for future RT-qPCR normalizations when studying gene expression during osteogenic differentiation, for example, in studies of osteoporosis and other bone diseases.     

The reliability of CPTu and DMT for the mechanical characterisation of soft tailings

Nowadays, the stability and the safe cover and closure of soft tailings has become one of the most challenging topics in geotechnical and environmental engineering. For appropriate analysis and modelling, geotechnical properties of tailings should be well defined. Due to low strength, viscous nature and poor trafficability, as well as due to the specific geometrical properties of fine particles and pore water chemistry in tailings, different test methods and their modification and improvements must be used for valid and reliable characterisation of tailings. This paper analyses and compares the results of different field test methods, piezocone penetration test (CPTu), flat dilatometer test (DMT) and field vane test (FVT), performed on the red gypsum sludge and complementary laboratory tests. CPTu and DMT measurements were evaluated using procedures developed for soils and the obtained mechanical properties were compared with those measured in the laboratory. The significant distinctions between different test methods and different empirical correlations were analysed taking into account differences in index properties of soils and the red gypsum sludge. Based on analysis, some modifications of conventional empirical correlations were proposed for field tests results interpretation and sludge characterisation. The obtained data also show the advantages and limitations of some conventional methods and prove the need for further development in that field of geotechnical investigation.

     

Characterisation of flavour compounds in Biska – a herbal spirit produced with mistletoe

Mistletoe (Viscum album) is mostly used in its herbal form owing to its content of diverse biologically active substances. In Croatia's Adriatic region, it is used for production of Biska, a strong alcoholic beverage produced by maceration of mistletoe in spirit or brandy, with or without the addition of honey. In this work, Biska was characterised by analysis of aroma compounds and physicochemical parameters and is the first study of the aroma profile of a strong alcoholic beverage produced with mistletoe. The aroma of 14 samples of Biska – five commercial and nine homemade – was analysed using GC/MS with solid‐phase microextraction. A total of 166 aroma compounds were detected. Major components were ethyl esters (medium and long chain fatty acids), fatty alcohols, isopropyl myristate, aldehyde decanal and some terpenes. The distribution of aroma compounds was evaluated by principal component analysis. Some significant differences in physicochemical properties were observed including ethanol concentration (28–44% v/v) and pH (4.4–6.5). Although the colour of Biska was light brown with greenish reflections, there were differences in chromatic parameters. The commercial samples were darker and were less transparent than homemade Biska, perhaps reflecting more extensive maceration/extraction or the addition of caramel. © 2018 The Institute of Brewing & Distilling     

Evaluation of microbial toxins,trace elements and sensory properties of a high-theabrownins instant Pu-erh tea produced using Aspergillus tubingensis via submerged fermentation

Theabrownins (TB) are polymeric phenolic compounds associated with the multiple bioactivities of Pu-erh tea, a post-fermented Chinese dark tea. High-TB instant Pu-erh tea was produced via a novel submerged fermentation (SF) using Aspergillus tubingensis and compared with samples produced commercially via the conventional solid-state fermentation (SSF). Viable microorganisms and microbial toxins, especially aflatoxins B₁, G₁, B₂, G₂, cyclopiazonic acid, fumonisins B₁, B₂, B₃ and ochratoxin A, were below the detection limit in all samples. Fewer microbial metabolites were found in SF instant tea compared with the SSF teas. Based on an adult consuming 1 g of instant Pu-erh tea daily, the dietary intake of investigated elements was below the safe limits recommended by various authorities. Tasters viewed the instant tea infusions as very mild, smooth, mellow and full. This suggested that submerged fermentation using A. tubingensis offers a speedy and safe alternative to commercial production of instant Pu-erh tea.