Characterization of the Residence Time Distribution in Spray Dryers

In this work it is presented a study on the residence time distribution (RTD) of particles in a co-current pilot-plant spray dryer operated with a rotary atomization system. A nuclear technique is applied to investigate the RTD responses of spray dryers. The methodology is based on the injection of a radioisotope tracer in the feed stream followed by the monitoring of its concentration at the outlet stream. The experiments were performed during the drying of aqueous suspensions of gadolinium oxide. The RTD responses obtained experimentally presented good reproducibility, indicating that the technique applied is well suited to investigating fluid-dynamics of spray dryers. In addition to the experimental investigation, a mathematical model was used to describe the RTD experimental curves.     

Clarification of a wheat straw‐derived medium with ion‐exchange resins for xylitol crystallization

BACKGROUND: Xylitol bioproduction from lignocellulosic residues comprises hydrolysis of the hemicellulose, detoxification of the hydrolysate, bioconversion of the xylose, and recovery of xylitol from the fermented hydrolysate. There are relatively few reports on xylitol recovery from fermented media. In the present study, ion‐exchange resins were used to clarify a fermented wheat straw hemicellulosic hydrolysate, which was then vacuum‐concentrated and submitted to cooling in the presence of ethanol for xylitol crystallization. RESULTS: Sequential adsorption into two anion‐exchange resins (A‐860S and A‐500PS) promoted considerable reductions in the content of soluble by‐products (up to 97.5%) and in medium coloration (99.5%). Vacuum concentration led to a dark‐colored viscous solution that inhibited xylitol crystallization. This inhibition could be overcome by mixing the concentrated medium with a commercial xylitol solution. Such a strategy led to xylitol crystals with up to 95.9% purity. The crystallization yield (43.5%) was close to that observed when using commercial xylitol solution (51.4%). CONCLUSION: The experimental data demonstrate the feasibility of using ion‐exchange resins followed by cooling in the presence of ethanol as a strategy to promote the fast recovery and purification of xylitol from hemicellulose‐derived fermentation media. Copyright © 2008 Society of Chemical Industry     

Optimal management of logistic activities in multi-site environments

The new emerging area of Enterprise Wide Optimization (EWO) has focused the attention in effectively solving the combined production/distribution scheduling problem. The importance of logistic activities performed in multi-site environments comes from the relative magnitude of the associated transportation costs and the good chance of getting large savings on such expenses. This paper first develops an exact MILP mathematical formulation for the multiple vehicle time-window-constrained pickup and delivery (MVPDPTW) problem. The approach is able to account for many-to-many transportation requests, pure pickup and delivery tasks, heterogeneous vehicles and multiple depots. Optimal solutions for a variety of benchmark problems with cluster/random distributions of pickup and delivery locations and limited sizes in terms of customer requests and vehicles have been discovered. However, the computational cost exponentially grows with the number of requests. For large-scale m-PDPTW problems, a local search improvement algorithm steadily providing a better solution through two evolutionary steps is also presented. A neighborhood structure around the starting solution is generated by first allowing multiple request exchanges among nearby trips and then permitting the reordering of nodes on every individual route. If a better set of routes is found, both steps are repeated until no improved solution is discovered. Compact MILP mathematical formulations for both sub-problems have been developed and solved through an efficient branch-and-bound algorithm. A significant number of large-scale m-PDPTW benchmark problems, some of them including up to 100 transportation requests, were successfully solved in reasonable CPU times.     

Self-adjusting the intensity of assortative mating in genetic algorithms

Mate selection plays a crucial role in both natural and artificial systems. While traditional Evolutionary Algorithms (EA) usually engage in random mating strategies, that is, mating chance is independent of genotypic or phenotypic distance between individuals, in natural systems non-random mating is common, which means that somehow this mechanism has been favored during the evolutionary process. In non-random mating, the individuals mate according to their parenthood or likeness. Previous studies indicate that negative assortative mating (AM)—also known as dissortative mating—, which is a specific type of non-random mating, may improve EAs performance by maintaining the genetic diversity of the population at a higher level during the search process. In this paper we present the Variable Dissortative Mating Genetic Algorithm (VDMGA). The algorithm holds a mechanism that varies the GA’s mating restrictions during the run by means of simple rule based on the number of chromosomes created in each generation and indirectly influenced by the genetic diversity of the population. We compare VDMGA not only with traditional Genetic Algorithms (GA) but also with two preceding non-random mating EAs: the CHC algorithm and the negative Assortative Mating Genetic Algorithm (nAMGA). We intend to study the effects of the different methods in the performance of GAs and verify the reliability of the proposed algorithm when facing an heterogeneous set of landscapes. In addition, we include the positive Assortative Mating Genetic Algorithm (pAMGA) in the experiments in order test both negative and positive AM mechanisms, and try to understand if and when negative AM (or DM) speeds up the search process or enables the GAs to escape local optima traps. For these purposes, an extensive set of optimization test problems was chosen to cover a variety of search landscapes with different characteristics. Our results confirm that negative AM is effective in leading EAs out of local optima traps, and show that the proposed VDMGA is at least as efficient as nAMGA when applied to the range of our problems, being more efficient in very hard functions were traditional GAs usually fail to escape local optima. Also, scalability tests have been made that show VDMGA ability to decrease optimal population size, thus reducing the amount of evaluations needed to attain global optima. We like to stress that only two parameters need to be hand-tuned in VDMGA, thus reducing the tuning effort present in traditional GAs and nAMGA.     

Real-Time Three-Dimensional Occupancy Grid Modeling for the Detection and Tracking of Construction Resources

Awareness of the construction environment can be improved by automatic three-dimensional (3D) sensing and modeling of job sites in real time. Commercially available 3D modeling approaches based on range scanning techniques are capable of modeling static objects only, and thus cannot model dynamic objects in real time in an environment comprised of moving humans, equipment, and materials. Emerging prototype video range cameras offer an alternative by facilitating affordable, wide field of view, dynamic object tracking at frame rates better than 1?Hz (real time). This paper describes a methodology to model, detect, and track the position of static and moving objects in real time, based on data obtained from video range cameras. Experiments with this technology have produced results that indicate that video rate 3D data acquisition and analysis of construction environments can support effective modeling, detection, and tracking of project resources. This approach to job site awareness has inherent value and broad application. In combination with effective management practices and other sensing techniques, this technology has the potential to significantly improve safety on construction job sites.     

Electrophysiological properties and cholinergic responses of rat ventral oral pontine reticular neurons in vitro

This study analyses the relationship between the use of rotating instruments, the production of a smear layer and the presence of alterations to enamel microstructures. The rotating instruments used were carbide (8-12 blade) and diamond tipped (30-15 m) cutters. Cavities were made in extracted teeth. Subsequently, half the sample was analysed using the rugosimeter before and after the application of ortophosphoric acid at 35% for 15 and the other half suing a Scansion Electronic microscope (SEM). The results obtained showed on the one hand that carbide cutters leave a smoother surfacer than diamond tipped cutters, and on the other that the smear layer is eliminated better by carbide cutters compared to diamond tipped cutters. Moreover, there are no major traumatic-type alterations at the level of the enamel affecting the microstructure after the use of carbide cutters.     

Bioactivity of antifouling paints based on organotin toxicants

This paper discusses the bioactivity of antifouling paints based on organotin toxicants, such as tributyltin fluoride (TBTF) and triphenyltin fluoride (TPTF). These compounds were used alone or mixed as the main toxicant in formulations. The use of TPTF or mixtures of TPTF and TBTF, with vinyl binders, led to paints with satisfactory bioactivity during a 24 months immersion period. With the same binders, TBTF alone provided only 12 months of antifouling protection. The correlation coefficients calculated from the fouling attachment values and the rosin content in the binder showed that the bioactivity of the tested formulations depended on the solubility of the toxicant in sea water and on the composition and solubility of the binders.