Spatial variation in nitrogen dioxide in three European areas

In order to estimate the spatial variation within well-defined study areas, nitrogen dioxide was measured with diffusion samplers (Palmes tube) in 40-42 sites each in Germany (Munich), the Netherlands and Sweden (Stockholm County). Each site was measured over four 2-week periods during 1 year (spring 1999 to summer 2000). In each country, one reference site was measured during all periods and the results were used to adjust for seasonal variability, to improve the estimates of the annual average. Comparisons between the chemiluminescence method (European reference method) and Palmes tube measurement indicated a good agreement in Germany (with a ratio of 1.0 for Palmes tube/chemiluminescence) but underestimation for Palmes tube measurement in the Netherlands and Sweden (0.8 for both countries). The r2 values were between 0.86 and 0.90 for all three countries. The annual average values for NO2 for different sampling sites were between 15.9 and 50.6 (mean 28.8 microg/m3) in Germany, between 12.1 and 50.8 (mean 28.9 microg/m3) in the Netherlands and between 6.1 and 44.7 (mean 18.5 microg/m3) in Sweden. Comparing spatial variation between similar sites in the three countries, we did not find any significant differences between annual average levels for urban traffic sites. In Sweden, annual average levels in urban background and suburban backgrounds sites were about 8 microg/m3 lower than comparable sites in Germany and the Netherlands. Comparing site types within each country only urban traffic sites and suburban background sites differed in Germany. In the Netherlands and Sweden, the urban traffic sites differed from all other sites and in Sweden also the urban background sites differed from the other background sites. The observed contribution from local traffic was similar in the Netherlands and Sweden (10 and 8 microg/m3, corresponding to 26-27% of the NO2 concentration found in the urban traffic sites). In Germany, the contribution from local traffic was only 3 microg/m3, corresponding to 9% of the NO2 concentration found in the urban traffic sites. The spatial variation was substantially larger for NO2 than the variation for PM2.5 and similar to PM2.5 absorbance, measured in the same locations.     

Whole Exome Sequencing Identifies a Heterozygous Variant in the Cav1.3 Gene CACNA1D Associated with Familial Sinus Node Dysfunction and Focal Idiopathic Epilepsy

Cav1.3 voltage-gated L-type calcium channels (LTCCs) are involved in cardiac pacemaking, hearing and hormone secretion, but are also expressed postsynaptically in neurons. So far, homozygous loss of function mutations in CACNA1D encoding the Cav1.3 α₁-subunit are described in congenital sinus node dysfunction and deafness. In addition, germline mutations in CACNA1D have been linked to neurodevelopmental syndromes including epileptic seizures, autism, intellectual disability and primary hyperaldosteronism. Here, a three-generation family with a syndromal phenotype of sinus node dysfunction, idiopathic epilepsy and attention deficit hyperactivity disorder (ADHD) is investigated. Whole genome sequencing and functional heterologous expression studies were used to identify the disease-causing mechanisms in this novel syndromal disorder. We identified a heterozygous non-synonymous variant (p.Arg930His) in the CACNA1D gene that cosegregated with the combined clinical phenotype in an autosomal dominant manner. Functional heterologous expression studies showed that the CACNA1D variant induces isoform-specific alterations of Cav1.3 channel gating: a gain of ion channel function was observed in the brain-specific short CACNA1D isoform (Cav1.3_S), whereas a loss of ion channel function was seen in the long (Cav1.3_L) isoform. The combined gain-of-function (GOF) and loss-of-function (LOF) induced by the R930H variant are likely to be associated with the rare combined clinical and syndromal phenotypes in the family. The GOF in the Cav1.3_S variant with high neuronal expression is likely to result in epilepsy, whereas the LOF in the long Cav1.3_L variant results in sinus node dysfunction.     

Landscape of Genomic Alterations and PD-L1 Expression in Early-Stage Non-Small-Cell Lung Cancer (NSCLC)—A Single Center,Retrospective Observational Study

Precision oncology and immunotherapy have revolutionized the treatment of advanced non-small-cell lung cancer (NSCLC). Emerging studies show that targeted therapies are also beneficial for patients with driver alterations such as epidermal growth factor receptor (EGFR) mutations in early-stage NSCLC (stages I–IIIA). Furthermore, patients with elevated programmed death-ligand 1 (PD-L1) expression appear to respond favorably to adjuvant immunotherapy. To determine the frequency of genomic alterations and PD-L1 status in early-stage NSCLC, we retrospectively analyzed data from 2066 unselected, single-center patients with NSCLC diagnosed using next-generation sequencing and immunohistochemistry. Nine-hundred and sixty-two patients (46.9%) presented with early-stage NSCLC. Of these, 37.0% had genomic alterations for which targeted therapies have already been approved for advanced NSCLC. The frequencies of driver mutations in the early stages were equivalent to those in advanced stages, i.e., the rates of EGFR mutations in adenocarcinomas were 12.7% (72/567) and 12.0% (78/650) in early and advanced NSCLC, respectively (p = 0778). In addition, 46.3% of early-stage NSCLC cases were PD-L1-positive, with a tumor proportion score (TPS) of ≥1%. With comparable frequencies of driver mutations in early and advanced NSCLC and PD-L1 overexpression in nearly half of patients with early-stage NSCLC, a broad spectrum of biomarkers for adjuvant and neoadjuvant therapies is available, and several are currently being investigated in clinical trials.     

Herstellen von Schneidspänen mit Flachscheiben-Zerspanern

Ohne Zusammenfassung The online version of the original article can be found at     

P3HT/PCBM Bulk Heterojunction Solar Cells: Impact of Blend Composition and 3D Morphology on Device Performance

The performance of polymer solar cells (PSC) strongly depends on the 3D morphological organization of the donor and acceptor compounds within the bulk heterojunction active layer. The technique of electron tomography is a powerful tool for studying 3D morphology of the layers composed of poly(3‐hexylthiophene) (P3HT) and a fullerene derivative ([6,6]‐phenyl‐C61‐butyric acid methyl ester; PCBM), especially to quantify the amount and distribution of fibrillar P3HT nanocrystals throughout the volume of the active layer. In this study, electron tomography is used to characterize P3HT/PCBM layers with different blend compositions, both before and after thermal annealing. The power conversion efficiency of the corresponding PSCs is strongly dependent on the overall crystallinity of P3HT and the way P3HT crystals are distributed throughout the thickness of the active layer.     

P3HT based solution-processed pseudo bi-layer organic solar cell with enhanced performance

We present a solution-processed pseudo bi-layer organic solar cell with poly(3-hexyl thiophene) (P3HT) as donor and indene-C₆₀ bisadduct (ICBA) as acceptor. The devices were fabricated by sequential processing of the active components followed by a thermal annealing treatment. An efficiency of 5.9% was achieved under AM 1.5G irradiation (1000 W/m²). The obtained efficiency is attributed to an enhanced nanomorphology that arises from the inter-diffusion of the ICBA molecules into a layer of pre-organised polymer (P3HT) and also due to the subsequent crystallisation of the ICBA molecules. These processes facilitate efficient charge generation and extraction. Time of flight-secondary ion mass spectroscopy (TOF-SIMS) depth profiling was carried out for different thermal annealing treatments of these pseudo bi-layer devices, which reveals full inter-diffusion of ICBA into the polymer P3HT. Photo-CELIV (charge extraction by linearly increasing voltage) studies elucidates that the thermal annealing imparts crystallinity to the fullerene phase which results in the improvement of charge carrier mobility.     

Homogenized model for fluid-structure interaction of the pressurized water reactor core internals during blowdown

A method for the numerical simulation of the pressurized water reactor core internal's behaviour during a blowdown accident is described, by which the motion of the reactor core and the interaction of the fuel elements with the core barrel and the coolant medium is calculated. Furthermore, some simple models for the support columns, lower and upper core support and the grid plate are provided. In order to investigate the global core motion during the blowdown accident, the core model describes the coupled fluid-rod motion with Homogenization methods. The heterogeneous fluid-rod mixture thus is treated as a special continuum with anisotropic material properties. Furthermore, the core model considers elastical rod forces against bending and axial straining and the direct interaction of neighbouring fuel elements, which is a highly nonlinear process due to the finite gaps. Because this effect is very important, two simulation models have been developed and are compared. All these models have been implemented into the blowdown code FLUX-4. With the new code version FLUX-5 the PWR-blowdown is parametrically investigated.     

Deposition of titanium on SiC fibres from chloride melts

The present study examined the feasibility of producing titanium matrix composites based on a molten salt fibre coating process. It is demonstrated that sufficiently thick and coherent titanium coatings can be deposited on SiC fibres in LiCl–KCl–TiCl₂ at 700 K. One important aspect of the study was the behaviour of the substrate during electrolysis. Therefore, additional features related to carbon-coated SiC fibres and carbonaceous substrates in general are outlined. The morphologies and microstructures of electrolytically coated SiC fibres were investigated by scanning electron microscopy and compared to fibres coated by a physical vapour deposition technique. The cause and relevance of the growth failures that were observed in this study are also discussed.