Experimental abatement data of underflow baffles for removal of floatables in the CSOs of the Greater Montréal (Canada) area.

Underflow baffles have gained in popularity over the years as a viable mean to intercept floatables in Combined Sewer Overflows (CSOs). This choice was mainly justified by the extremely low capital cost (CAPEX) and operational cost (OPEX) of this solution, although the efficiency of underflow baffles has never been clearly proven. The only similar application to underflow baffles are scum boards in grit chambers and clarifier. However, the flow conditions at CSOs vary considerably from those in grit chambers and clarifier. For this reason, review of the behavior of floatables in a rapid flow is paramount. Only then can comprehensive design criteria for underflow baffles and overflow chambers be suggested. Pilot scale tests, performed in a 17 metres long basin at various flowrates, had already shown that a critical horizontal velocity for floatables (Vcr) may develop in the overflow chambers. In this follow up study, the fate of intercepted floatables was investigated. It appears from this latest data that permanent capture of floatables decreases rapidly with an increase in the horizontal velocity of the flow, no matter what the baffle depth. Baffle depth increases capture at lower velocities (0.17 m/s) but become irrelevant at higher velocities (0.61 m/s). This data suggests that capture efficiency of existing underflow baffles in overflow chambers can be, at best, very low whenever the horizontal velocity increases above 0.30 m/s or 1 ft/s.     

Simultaneous sulfide and acetate oxidation under denitrifying conditions using an inverse fluidized bed reactor

BACKGROUND: Simultaneous removal of sulfur, nitrogen and carbon compounds from wastewaters is a commercially important biological process. The objective was to evaluate the influence of the CH₃COO^?/NO₃^? molar ratio on the sulfide oxidation process using an inverse fluidized bed reactor (IFBR). RESULTS: Three molar ratios of CH₃COO^?/NO₃^? (0.85, 0.72 and 0.62) with a constant S^2?/NO₃^? molar ratio of 0.13 were evaluated. At a CH₃COO^?/NO₃^? molar ratio of 0.85, the nitrate, acetate and sulfide removal efficiencies were approximately 100%. The N₂ yield (g N₂ g^?1 NO₃^?‐N consumed) was 0.81. Acetate was mineralized, resulting in a yield of 0.65 g inorganic‐C g^?1 CH₃COO^?‐C consumed. Sulfide was partially oxidized to S⁰, and 71% of the S^2? consumed was recovered as elemental sulfur by a settler installed in the IFBR. At a CH₃COO^?/NO₃^? molar ratio of 0.72, the efficiencies of nitrate, acetate and sulfide consumption were of 100%, with N₂ and inorganic‐C yields of 0.84 and 0.69, respectively. The sulfide was recovered as sulfate instead of S⁰, with a yield of 0.92 g SO₄^2?‐S g^?1 S^2? consumed. CONCLUSIONS: The CH₃COO^?/NO₃^? molar ratio was shown to be an important parameter that can be used to control the fate of sulfide oxidation to either S⁰ or sulfate. In this study, the potential of denitrification for the simultaneous removal of organic matter, sulfide and nitrate from wastewaters was demonstrated, obtaining CO₂, S⁰ and N₂ as the major end products. Copyright © 2008 Society of Chemical Industry     

管理技术--创新、学习及成熟度(中)

在基于项目的组织中实现创新 在本节我们将探讨如何在项目环境中进行创新.首先我们来了解一下人们进行改变,进而实现创新的规律;然后我们介绍两种截然不同的管理创新的方法,即常用的线性推理方法和有机推进法;最后,我们对它们的优缺点做一个比较,看看它们各自适用于什么情况.     

Effects of lung volume and fatigue on evoked diaphragmatic phonomyogram in normal subjects

BACKGROUND: A diaphragmatic phonomyogram (PMG) evoked by maximal phrenic nerve stimulation at end expiratory lung volume (FRC) has been previously described as a good index of changes in diaphragmatic contractility with fatigue. A study was undertaken to assess whether this conclusion could be extended to different lung volumes. METHODS: Diaphragmatic compound motor action potentials (CMAPs) were recorded on each side of the chest by the means of surface electrodes placed over the eight intercostal spaces in five healthy subjects. Diaphragmatic PMGs from both sides were recorded with condenser microphones fixed to the skin close to the CMAP recording electrodes. Oesophageal and gastric balloon tipped catheters were employed to measure transdiaphragmatic pressure twitches (TwPDI) which served as the standard measure of changes in diaphragmatic contractility. PMG and TwPDI responses were compared at different lung volumes over inspiratory capacity both before and after fatiguing inspiratory resistive loading. RESULTS: No consistent relationship was found in different subjects or on different days in the same subject between PMG and lung volume or between PMG and TwPDI. However, the PMG:CMAP ratio from both sides at any given lung volume decreased after fatigue in roughly the same proportion as the TwPDI. CONCLUSIONS: These results show that, although PMG can detect changes in diaphragmatic contractility caused by fatigue in normal subjects, lung volume changes need to be controlled and each subject should serve as his or her own control.     

Rank order filters and priority queues

Summary A derivation of a parallel algorithm for rank order filtering is presented. Both derivation and result differ from earlier designs: the derivations are less complicated and the result allows a number of different implementations. The same derivation is used to design a collection of priority queues. Both filters and priority queues are highly efficient: they have constant response time and small latency. Anne Kaldewaij received an M.Sc. degree in Mathematics from the University of Utrecht (The Netherlands) and a Ph.D. degree in Computing Science from the Eindhoven University of Technology. Currently, he is associate professor in Computing Science at Eindhoven University. His research includes parallel programming and the design of algorithms and data structures. He enjoys teaching and he has written a number of textbooks on mathematics and programming. Jan Tijmen Udding received an M.Sc. degree in Mathematics in 1980 and a Ph.D. degree in Computing Science in 1984 from Eindhoven University of Technology. Currently, he is associate professor at Groningen University. His main research interests are mathematical aspects of VLSI, program derivation and correctness, and functional programming.     

Prediction of fire classification for wood based products. A multivariate statistical approach based on the cone calorimeter

Wood has long traditions as a building material, and is often used in construction elements, and as interior and exterior surfaces in the Nordic countries. In most applications, there are reaction to fire requirements to products used as surfaces, e.g. in escape routes and larger public spaces. Most wood products will therefore have to be treated with fire retardant (FR) agents to fulfil the strict requirements to properties connected to heat release and flame spread. Unfortunately, FR agents usually also increase the smoke production, as they cause a more incomplete combustion of the wood. The wood product manufacturers seek to find the optimal amount of FR additives where both heat release and smoke production in the classifying test are within the requirements given in the building regulations. This paper describes models for prediction of the European reaction to fire classes of wood products. The models are based on multivariate statistical analysis, and use test results from the cone calorimeter test as input. The presented models are, with very good precision, able to predict which Euroclass and additional smoke class a wood based product would obtain if it were to be tested in the single burning item test. Copyright © 2006 John Wiley & Sons, Ltd.     

Water quality assessment of a recently refilled reservoir: The case of Bütgenbach Reservoir, Belgium

Bütgenbach Reservoir is situated in the High Ardennes plateau in eastern Belgium (50°25′N; 6°13′E). It is used principally for flood control and for production of hydroelectric energy. It has been subjected to a previous series of studies because of its eutrophication problems and their impacts on the local economy. Bütgenbach Reservoir was emptied during spring 2004 for dam restoration, being refilled in mid‐September of the same year. Selected physicochemical and biological parameters (temperature, dissolved oxygen, pH, inorganic and organic nutrients, chlorophyll‐a) were measured fortnightly during the lake's productive season (mid‐April to mid‐October 2005) at three sampling sites throughout the water column. The water quality conditions after refilling of the lake were compared to previous studies accomplished at the same sampling sites (prior to emptying the lake). The actual trophic status was mesotrophic to eutrophic, based on the combination of total phosphorous and chlorophyll‐a concentrations, as well as water transparency. Bütgenbach Reservoir generally exhibits good water quality, based on the French water quality system SEQ‐eau. A longitudinal decrease in water quality was observed from upstream to downstream, because mainly of the differences in lake bottom morphology and water residence time, and their impacts on nutrient distribution in the lake.