Oxidative degradation of polyamide reverse osmosis membranes: Studies of molecular model compounds and selected membranes

Selected aromatic amides were used to model the chemical reactivity of aromatic polyamides found in thin‐film composite reverse osmosis (RO) membranes. Chlorination and possible amide bond cleavage of aromatic amides upon exposure to aqueous chlorine, which can lead to membrane failure, were investigated. Correlations are made of the available chlorine concentration, pH, and exposure time with chemical changes in the model compounds. From the observed reactivity trends, insights are obtained into the mechanism of RO membrane performance loss upon chlorine exposure. Two chemical pathways for degradation are shown, one at constant pH and another that is pH‐history dependent. An alternative strategy is presented for the design of chlorine‐resistant RO membranes, and an initial performance study of RO membranes incorporating this strategy is reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1173–1184, 2003     

Perceived stress management skill mediates the relationship between optimism and positive mood following radical prostatectomy.

This study evaluated relations among optimism, perceived stress management skills (PSMS), and positive mood in 46 men who had surgical treatment for localized prostate cancer. The authors found that optimism, PSMS, and positive mood scores were positively correlated. Positive mood was unrelated to demographic and disease-related control variables. In a hierarchical regression model controlling for PSMS, the relationship between optimism and positive mood became nonsignificant, whereas PSMS remained a correlate of positive mood. Results suggest that the relationship between optimism and positive mood may be mediated by belief in being able to use stress management techniques effectively. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Iron–cobalt catalysts synthesized by a reverse micelle impregnation method for controlled growth of carbon nanotubes

Fe–Co bimetallic metals supported on CaCO₃ support have been prepared using three different methods for the preparation of the catalysts; wet impregnation (IMP), deposition–precipitation (DP) and reverse micelle impregnation (RM). By careful choice and optimization of CVD reaction conditions and catalyst preparation procedures, we have tailored the nanofabrication of CNTs using 5 wt.% Fe–Co/CaCO₃. High yields of ‘clean’ MWNTs with near 100% selectivity and excellent reproducibility were obtained (1215% and 835% yields for the IMP and DP methods respectively). The RM technique enabled more precise control over the size of the CNTs and a narrower diameter distribution (3–5 nm i.d. and 10–15 nm o.d.) was obtained.     

Selecting a waste management option using a life-cycle analysis approach

Solid-waste management, and in particular the disposal of used packaging, is currently the subject of much topical debate. This is driven by both consumer and legislative pressures. Consumers see used packaging as a highly visible element of municipal solid waste, complaining of excessive packaging and low levels of recycling. Legislators, perhaps in pandering to the views expressed by consumer bodies, have been active within the CEC and individual Member States by introducing (or proposing) legislation or similar regulatory tools and targets to facilitate a greater diversion of used packaging from disposal by landfill to alternative solid-waste management practices, in particular recycling, which are widely accepted to have a lower impact on the environment. In this paper the relative environmental profiles of pursuing alternative solid-waste management practices to disposal by landfill are explored, focusing not just on solid waste per se but also on associated considerations of energy consumption and emissions, which are invariably overlooked as factors contributing to the environmental impact of solid-waste management practices.     

High throughput VLSI DSP using replicated finite rings

This paper discusses strategies for implementing DSP systems using residue replication. The theory, recently introduced by two of the authors, uses formal polynomial ring mappings, from binary representations, to direct product ring implementation of integer processing arrays. The mapping produces completely independent computational arrays each computing over the same ring. This paper describes an architecture and processing array to implement, and take advantage of, the special computational ring structures that result from the mapping. A brief review of the theory and mapping techniques, is followed by the discussion of the architecture and VLSI design of an efficient inner product processing array using Fermat Primes.     

Investigating the Social Dimensions of Transport Disadvantage II: From Concepts to Methods through an Empirical Case Study

This article is the second of two papers that review the field of spatially sensitive social scientific research into the links between social status and transport disadvantage. The first paper undertook a comprehensive review of the social scientific and transport planning literature to mark the level of development in the field and identify conceptual and methodological issues and constraints in this field of inquiry. The present article supports the advancement of socially and geographically sensitive transport research by opportunities for the development of more sophisticated spatial analytical methodologies. The approach we present is able to account for factors not previously addressed in either social or transport planning research, in particular the temporal dimensions of transport service accessibility. The article articulates the methodology through an empirical case study of socio-spatial transport disadvantage within the Gold Coast City. The article demonstrates that there are important theoretical and practical lessons to be gained for researchers and policy makers in addressing the social dimensions of transport and infrastructure provision. Further, the article argues that an attentiveness to new ways of combining and representing social and transport data-sets can promote policy relevant empirical social inquiry. The article also contributes in a productive way to the empirical knowledge of Australia's sixth-largest metropolitan area, which is often overlooked by urban scholars.     

Quasi-static and dynamic crushing behaviors of aluminum and steel tubes with a cutout

Tubular members are commonly used as an energy absorber in engineering structures and many such members have a cutout. In this study, the crushing behaviors of tubes with a cutout are characterized and the effects of cutout on the energy absorption capabilities of these tubes are quantified. Systematic parametric studies were carried out to study the effect of material properties, including yield and ultimate strength of material, strain rate effect, location of cutout, tube length and impact speed on the crushing behaviors and energy absorption capacity of aluminum and steel tubes. First, a numerical model was constructed with a commercial explicit finite element code. It will be first proven that the numerical simulation can produce sufficiently accurate results in an economic manner. Subsequently, the crushing behavior of aluminum and steel tubes with a cutout was experimentally characterized and their energy absorption capacity was evaluated in terms of mean crushing force, peak crushing force and specific energy absorption (SEA). Tubes of various lengths with a cutout located at different locations, subject to both quasi-static and dynamic impact loadings were considered. For steel tubes, the numerical simulation investigated the influence of the strain rate effect and variation in strain hardening ratio of the material. Empirical equations describing the mean and peak crushing forces of aluminum and steel tubes with a cutout were developed using linear and nonlinear regression methods applied to the results obtained from the numerical and experimental studies.     

Generation and context memory.

Generation enhances memory for occurrence but may not enhance other aspects of memory. The present study further delineates the negative generation effect in context memory reported in N. W. Mulligan (2004). First, the negative generation effect occurred for perceptual attributes of the target item (its color and font) but not for extratarget aspects of context (location and background color). Second, nonvisual generation tasks with either semantic or nonsemantic generation rules (antonym and rhyme generation, respectively) produced the same pattern of results. In contrast, a visual (or data-driven) generation task (letter transposition) did not disrupt context memory for color. Third, generating nonwords produced no effect on item memory but persisted in producing a negative effect on context memory for target attributes, implying that (a) the negative generation effect in context memory is not mediated by semantic encoding, and (b) the negative effect on context memory can be dissociated from the positive effect on item memory. The results are interpreted in terms of the processing account of generation. The original, perceptual-conceptual version of this account is too narrow, but a modified processing account, based on a more generic visual versus nonvisual processing distinction, accommodates the results. (PsycINFO Database Record (c) 2010 APA, all rights reserved)