Household biomass fuel use is associated with chronic childhood malnutrition: Result from a nationwide cross-sectional survey in Bangladesh

Despite significant investment, childhood malnutrition continues to be a significant public health problem especially in least developed countries. The aim of this study was to find association between household biomass fuel (BMF) use and childhood malnutrition in Bangladesh using data from Demographic and Health Survey 2011. We included a total 6891 children under 5 years of age in the analysis. The prevalence of wasting, underweight, and stunting from BMF using household was 16.1% (n = 997; 95%CI, 15.1–17.3), 39.0% (n = 2399; 95%CI, 37.1–40.9), and 43.3% (n = 2620; 95%CI, 41.6–45.1), respectively. Underweight and stunting were significantly higher among children from households using BMF compared with the children from CF using households (underweight, biomass vs clean fuel: 39.0% vs. 23.5%, p < 0.001; stunting, biomass vs clean fuel: 43.3 vs. 31.5%, p < 0.001). The use of BMF in the household was significantly associated with underweight (OR = 1.38; 95%CI: 1.10–1.73) and stunting (OR = 1.58; 95%CI: 1.18–1.98) among children <5 years of age after adjusting possible confounders in mixed effect logistic regression analysis. This study found a significant association between chronic childhood malnutrition and household BMF use which is indicating possible alternative risk factor for malnutrition. Further prospective research is required to explore the mechanism of how BMF use results in chronic malnutrition.     

Load transportation by dual arm robot using sliding mode control

In this study, a sliding mode controlled dual arm robotic system was designed. Such multi-arm, collaborative and synchronous robots typically are employed in hazardous situations such as radioactive materials transport explosives disposal and industrial applications. In the present study, a high performance, robust, non-chattering sliding mode controller (SMC) was developed for the purpose of safe load handling, transportation and trajectory realization. First, dynamic equations of robot/load interaction were derived. Then, the robust SMC was designed for the dual arm robotic system. In order to test the robustness of the proposed SMC, parameter variations and external disturbances were introduced to the system. Furthermore, for comparative purposes, the conventional and widely used, PID controller was also applied to the dual arm robot. Significantly, it was found that the SMC made smaller trajectory tracking errors than the PID controller. An overall analysis of the numerical results confirmed that the dual-arm robotic systems with the proposed SMC can safely and effectively be used in hazardous applications.     

Wear characteristics of commercial gas turbine components

Wear is one of the common degradations in a commercial gas turbine. A stainless steel grade 304 (SS 304) fuel nozzle and its collar made of nickel-based superalloy (Hastelloy X) are two vital components that normally suffer from rapid wear. During an installation, the fuel nozzle is slotted into the collar of the combustion liner. In operation, these two surfaces are subjected to high pressure from the fuel combustion, hence continuously rubbing against each other causes vibrations. During the start–stop operation, these surfaces had undergone a large relative motion. The vibration is the main cause of the wear occurrence on the surfaces. Physical properties of the worn surfaces were obtained through visual observations: wear measurement, hardness and microstructure examination. Through visual observations, fretting wear was mainly suspected as the dominant wear mode, particularly after 8,000 of running hours at high temperature and vibration. In short, this paper discusses the preliminary findings of wear on the fuel nozzle and its collar. It also discusses the changes in the mechanical properties before and after the operation. Solutions for mitigating the problem were discussed.     

Concentration measurements of bubbles in a water column using an optical tomography system

Optical tomography provides a means for the determination of the spatial distribution of materials with different optical density in a volume by non-intrusive means. This paper presents results of concentration measurements of gas bubbles in a water column using an optical tomography system. A hydraulic flow rig is used to generate vertical air-water two-phase flows with controllable bubble flow rate. Two approaches are investigated. The first aims to obtain an average gas concentration at the measurement section, the second aims to obtain a gas distribution profile by using tomographic imaging. A hybrid back-projection algorithm is used to calculate concentration profiles from measured sensor values to provide a tomographic image of the measurement cross-section. The algorithm combines the characteristic of an optical sensor as a hard field sensor and the linear back projection algorithm.     

Study to observe the applicability of the adsorption isotherms used for the adsorption of medicine organics onto activated carbon

In the present study, the activated carbon was prepared by chemically activating polymer waste under the influence of potassium hydroxide (KOH). The pore properties including the Brunauer–Emmett–Teller (BET) surface area, the volume of the pore, its size distribution, and average diameter were also characterized herein. The present study also evaluated the ability of the activated carbon to remove naproxen sodium, tannic acid, and caffeine from aqueous solutions through a process of adsorption. The equilibrium isotherms employed for the adsorption of drug organics onto the activated carbon were measured experimentally. The obtained results were analyzed by employing the Redlich–Peterson, Dubinin–Redushkevich, Temkin, Frumkin, Halsey, and Henderson equations by using a linearized correlation coefficient and statistically at varied temperatures. The models and the isotherm constants were evaluated based on the changes in the temperature. Among all, the Redlich–Peterson equation was determined to best represent the equilibrium data for the adsorption of naproxen sodium, and caffeine onto the activated carbon.     

Investigation of mean glandular dose versus compressed breast thickness relationship for mammography

The relationship between the mean glandular dose (MGD) and the compressed breast thickness (CBT) is commonly used for the presentation of mammographic dose survey results and could also be useful for the assessment of individual breast doses retrospectively in case of lack of necessary dosimetric instrumentation. The high data scattering from the best fit reduces the reliability of this technique. The aim of this study was to investigate the accuracy of this relationship using the data collected from a patient survey and phantom experiment. Patients were divided into three different groups according to their breast glandularities, which were predicted from the inspection of previous mammograms. X-ray beam qualities that will be used in patient examinations were determined according to breast thickness and predicted glandularities. The MGD versus CBT relationship for all the examined patients resulted in a poor correlation (R(2) = 0.28). This relationship was separately obtained for each glandularity group and also for sub-groups of specific beam qualities. The best correlation (R(2) = 0.73) was obtained for the fatty breast group and Mo/Mo combination. A low correlation (R(2) = 0.34) was observed in the mid-glandularity group due to inclusion of a wide range of glandularities in this group. In the case of the dense breast group, although the glandularity range was narrow, there were e still high data scattering (R(2) = 0.25). This was probably due to the use of Mo/Rh and Mo/Mo combinations. This is validated by obtaining the MGD-CBT relationship specific to Mo/Mo combination (R(2) = 0.61).     

A comparative study of linear and non-linear regression analysis for ammonium exchange by clinoptilolite zeolite

Ammonium ion exchange from aqueous solution using clinoptilolite zeolite was investigated at laboratory scale. Batch experimental studies were conducted to evaluate the effect of various parameters such as pH, zeolite dosage, contact time, initial ammonium concentration and temperature. Freundlich and Langmuir isotherm models and pseudo-second-order model were fitted to experimental data. Linear and non-linear regression methods were compared to determine the best fitting of isotherm and kinetic model to experimental data. The rate limiting mechanism of ammonium uptake by zeolite was determined as chemical exchange. Non-linear regression has better performance for analyzing experimental data and Freundlich model was better than Langmuir to represent equilibrium data.     

Quantitative kinetic analysis in a microfluidic device using frequency-domain fluorescence lifetime imaging

A novel microfluidic approach for the quantification of reaction kinetics is presented. A three-dimensional finite difference numerical simulation was developed in order to extract quantitative kinetic information from fluorescence lifetime imaging experimental data. This approach was first utilized for the study of a fluorescence quenching reaction within a microchannel; the lifetime of a fluorophore was used to map the diffusion of a quencher across the microchannel. The approach was then applied to a more complex chemical reaction between a fluorescent amine and an acid chloride, via numerical simulation the bimolecular rate constant for this reaction was obtained.