Very Low Voltage MOS Translinear Loops Based on Flipped Voltage Followers

A novel technique for operating MOS Translinear loops at very low supply voltages is described, based on the use of Flipped Voltage Followers for biasing the loops. The resulting topologies, suited to standard CMOS processes, can be successfully applied to a varied repertory of low-voltage analog circuits, such as squarers, multipliers, filters, oscillators, and RMS-DC converters. Measurement results for a geometric-mean and a squarer/divider circuit demonstrate on silicon the usefulness of this technique.     

Novel droop-compensated comb decimation filter with improved alias rejections

This paper presents a novel two-stage comb decimator with the improved magnitude characteristic. Simple multiplierless corrector filters, which are designed using the frequency sampling and IFIR methods, are introduced. The proposed filters compensate the comb passband droop in the wideband passband region and increase the attenuations in the folding bands. Using the multirate identity the filters may be moved to a lower rate. The filter design depends only on the number of the cascaded comb filters and do not depend on the decimation factor M.     

Functional Properties of Plasticized Bio-Based Poly(Lactic Acid)_Poly(Hydroxybutyrate) (PLA_PHB) Films for Active Food Packaging

Fully bio-based and biodegradable active films based on poly(lactic acid) (PLA) blended with poly(3-hydroxybutyrate) (PHB) and incorporating lactic acid oligomers (OLA) as plasticizers and carvacrol as active agent were extruded and fully characterized in their functional properties for antimicrobial active packaging. PLA_PHB films showed good barrier to water vapor, while the resistance to oxygen diffusion decreased with the addition of OLA and carvacrol. Their overall migration in aqueous food simulant was determined and no significant changes were observed by the addition of carvacrol and OLA to the PLA_PHB formulations. However, the effect of both additives in fatty food simulant can be considered a positive feature for the potential protection of foodstuff with high fat content. Moreover, the antioxidant and antimicrobial activities of the proposed formulations increased by the presence of carvacrol, with enhanced activity against Staphylococcus aureus if compared to Escherichia coli at short and long incubation times. These results underlined the specific antimicrobial properties of these bio-films suggesting their applicability in active food packaging.     

Antimicrobial and antibiofilm activities of procyanidins extracted from laurel wood against a selection of foodborne microorganisms

This study aimed to evaluate the antimicrobial and antibiofilm activities of two procyanidins isolated from an ethyl acetate extract of laurel wood against a selection of foodborne pathogens. The analysis of the extract by HPLC–DAD/ESI–MS allowed us to detect the presence of two procyanidins, which were selectively isolated and identified by chromatographic and spectroscopic means as cinnamtannin B‐1 ( 1 ) and procyanidin B‐2 ( 2 ). Procyanidins 1 and 2 exhibited two biological activities: inhibition of bacterial growth at high concentrations and prevention of biofilm formation at lower concentrations. Synergistic effect was also detected when both compounds were tested in combination against Listeria monocytogenes. Significant effects were also detected on disruption of preformed biofilm. The ability of procyanidins to inhibit microbial growth and biofilm formation and to synergistically work with each other may stimulate a market as natural food preservatives, and/or natural sanitisers for processing equipment where foodborne pathogens reside.     

Effect of processing on water absorption and softening kinetics in chickpea (Cicer arietinumL) seeds

The processing effect on the physical properties of chickpea seeds (kabuli type cv Athenas) is reported. Soaking of chickpea seeds in different solutions (distilled water, 0·5% NaHCO₃ and 0·5% CaCl₂) is characterised by a rapid water absorption followed by a decrease in the hydration rate to saturation point. An improvement in chickpea softening rate and water absorption during cooking, with previous 12 h soaking in 0·5% NaHCO₃, was observed. The presence of Ca²⁺ ions delayed the softening process in chickpea seeds. Physicochemical changes associated to the soaking and cooking process necessary for reducing cooking time are discussed. The texturometer method was estimated as a suitable objective method for the evaluation of the cooking degree in chickpea seeds. © 1998 Society of Chemical Industry     

Atmospheric DMSO degradation in the gas phase: Cl-DMSO reaction. Temperature dependence and products

The reactions of Cl atoms and ClO radicals with CH3-SOCH3 (DMSO) have been studied using the discharge flow method with direct detection of DMSO, CO, and products by mass spectrometry. The absolute rate constant at room temperature measured for reaction 1, (CH3)2SO + Cl --> products, was k(1) = (1.7 +/- 0.3) x 10(-11) cm3 molecule(-1) s(-1). For reaction 2, (CH3)2SO + ClO --> products, only an upper limit could be established, k(2) < or = 6 x 10(-14) cm3 molecule(-1) s(-1) Reaction 1 has been found to proceed through adduct formation and further decomposition involving the cleavage of the C-S bound. The pressure effect on the Cl-DMSO reaction from 0.5 to 3 Torr was negligible, and the temperature dependence in the range 273-335 K was also very slight. The results obtained are related to previous studies of sulfur compounds, and the atmospheric implications are also discussed in relation to the homogeneous sinks of DMSO. Tropospheric lifetimes of DMSO based on average Cl and ClO concentrations and the measured rate constants have been calculated showing that the contribution of reaction 1 must be of minor relevance in the marine boundary layer. Reaction 2 is so slow that it does not play any role within the atmospheric sulfur chemistry.     

Determination of polycyclic aromatic hydrocarbons in smoked pork by effect-directed bioassay with confirmation by chemical analysis

Polycyclic aromatic hydrocarbons (PAHs) are generated during smoke curing and other heating treatments of food and represent a large class of chemical pollutants including a number of carcinogens. At present, PAHs are frequently detected by costly and time-consuming chemical analysis. Effect-directed in vitro cell-based bioassays of contaminants can offer a rapid, sensitive, and relatively inexpensive alternative for screening of contaminants in comparison to instrumental analysis. They enable estimation of total biological activity of all compounds acting through the same mode of binding. The aryl hydrocarbon receptor as a binding site plays an important role in PAH-induced carcinogenesis. The in vitro chemical-activated luciferase expression assay (using conditions to detect PAH) was investigated for its applicability for effect-directed analysis of PAH levels in smoked meat. There was an intra-assay variability of 0 to 15% and a mean coefficient of variation of 25% (3 to 50%) for the cleanup and bioassay analysis of the smoked pork samples. There was a correlation between the total responses of the bioassay and the individual amounts of the PAHs with a high molecular weight. The comparison of 2,3,7,8-tetrachlorodibenzo-p-dioxin and benzo[k]fluoranthene used as standard in the in vitro chemical-activated luciferase expression assay resulted in benzo[k]fluoranthene being able to be used as an alternative, nontoxic standard in the bioassay. This bioassay is an applicable effect-directed functional prescreening method for the analysis of PAHs in smoked meat and appears to have potential in being used for food control in the future.     

Ultraviolet processing of liquid food: A review: Part 2: Effects on microorganisms and on food components and properties

The effectiveness of ultraviolet irradiation in inactivating microorganisms has been known for decades. Nevertheless, in the processing of foodstuff other important issues must be considered, such as organoleptic or nutritional properties preservation. Ultraviolet irradiation constitutes an alternative to thermal treatment that is being studied and developed to obtain a better final product sensory quality, but without neglecting microbial safety. Moreover, it has been proved that this technology can be useful to decompose some toxins that are not affected by thermal processing. In this piece of work, the effect of UV irradiation on all of these contaminants and components of liquid food has been reviewed.     

Enzymatic production of human milk fat substitutes containing palmitic and docosahexaenoic acids at sn-2 position and oleic acid at sn-1,3 positions

This paper studies the synthesis of structured triacylglycerols (STAGs) rich in palmitic and docosahexaenoic acids (PA and DHA) at sn-2 position and oleic acid (OA) at sn-1,3 positions by a four step process. First, triacylglycerols (TAGs) were obtained with 63–66 mol PA/100 mol total fatty acids and 10 mol DHA/100 mol by acidolysis of tuna oil and commercial PA, catalyzed by the non-positionally specific lipase Novozym 435. Then these TAGs were purified neutralizing the free fatty acids (FFAs) by KOH hydroethanolic solutions and extracting TAGs with hexane; these TAGs were completely recovered as pure TAGs (without FFAs). The third step involved the displacement of fatty acids located at sn-1,3 positions by acidolysis of PA and DHA enriched TAGs with OA rich FFAs, catalyzed by the sn-1,3 specific lipase DF from Rhizopus oryzae, immobilized on Accurel MP-1000; TAGs with 67 mol OA/100 mol at sn-1,3 positions and 52.1 and 15.4 mol PA and DHA, respectively, per 100 mol at sn-2 position were obtained. Both acidolysis reactions were carried out in stirred tank reactors (STRs) with lipase both dispersed in the reaction medium and contained in a cartridge filter attached to the stirrer rod. Finally STAGs were purified and obtained with yields of over 80 mol STAGs/100 mol STAGs in the reaction product (no FFAs were detected).     

Fatty acid composition, extraction, fractionation, and stabilization of bullfrog (Rana catesbeiana) oil

The oil extracted from the fat-storage organ (fat body) of the bullfrog (Rana catesbeiana) was characterized for its fatty acid composition. The main fatty acids were palmitic (18.1%), stearic (4.1%), myristic (2.7%), oleic (31.7%), and linoleic (12.9%) acids. Long-chain polyunsaturated fatty acids were also present in significant amounts, i.e., eicosapentaenoic (1.5%) and docosahexaenoic (4.7%), and were probably derived from the fish meal content of the diet. A partially fractionated oil was extracted from the homogenized and frozen fat body with an oleic acid content of 43.2%. The natural alkaloid boldine, added at 0.5 mg/g oil level, improved the oxidative stability by a factor ranging from 1.7 to 2.4, as assessed by the Oil Stability Index method between 90 and 110°C. The stabilization effect of boldine was higher than that of naringenin, morin, and quercitin and for the synthetic antioxidant butylated hydroxytoluene at the same concentration level.