排序方式: 共有46条查询结果,搜索用时 15 毫秒
1.
Mauro Marangoni Lukas Arnout Lieven Machiels Lieven Pandelaers Enrico Bernardo Paolo Colombo Yiannis Pontikes 《Journal of the American Ceramic Society》2016,99(6):1985-1991
The present paper deals with the synthesis of porous, sintered glass‐ceramics obtained at temperatures below 1150°C, originating from inorganic polymers based on fayalite slag. Firing led to the evaporation of water, dehydroxylation, and oxidation of Fe2+ above 345°C. For heating >700°C, the Si–O stretching band shifted from the 1160 and 750 cm?1 to the 1255 and 830 cm?1 region, due to a structural reorganization of the amorphous phase, whereas Fe–O bands appeared at 550 cm?1. The final microstructure consisted predominantly of an amorphous phase, hematite, and franklinite. The open porosity and compressive strength decreased and increased, respectively, as the firing temperature increased. The final values suggest properties comparable to that of structural lightweight concrete, still, the materials synthesized herein, are lighter, and made primarily from secondary resources. 相似文献
2.
Wael E. Houssen Dr. Stephen H. Wright Dr. Arnout P. Kalverda Dr. Gary S. Thompson Dr. Sharon M. Kelly Dr. Marcel Jaspars Prof. 《Chembiochem : a European journal of chemical biology》2010,11(13):1867-1873
The solution structure of the leader sequence of the patellamide precursor peptide was analysed by using CD and determined with NOE‐restrained molecular dynamics calculations. This leader sequence is highly conserved in the precursor peptides of some other cyanobactins harbouring heterocycles, and is assumed to play a role in targeting the precursor peptide to the post‐translational machinery. The sequence was observed to form an α‐helix spanning residues 13–28 with a hydrophobic surface on one side of the helix. This hydrophobic surface is proposed to be the site of the initial binding with modifying enzymes. 相似文献
3.
4.
Atmospheric transport of polybrominated diphenyl ethers and polychlorinated biphenyls to the Baltic Sea 总被引:5,自引:0,他引:5
The atmospheric transport of polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs) was compared by measuring concentrations in air and deposition on an island located in the central basin of the Baltic Sea. Median sigmaPBDE and sigmaPCB concentrations (gaseous + particle) were 8.6 and 7.4 pg m(-3), respectively. Airborne PCBs were mainly found in the gaseous phase, while most of the PBDEs were detected on particles, which agrees with predicted particle/gas distributions. SigmaPBDE levels were dominated by the decabrominated BDE209 followed bythe tetrabrominated BDE47 and pentabrominated BDE99. BDE209 is a marker for the environmental distribution of the commercial deca-BDE formulation (>99.5% BDE209), whereas BDE47 and BDE99 are markers for the commercial penta-BDE mixture. General correlations between PBDEs and PCBs suggested similarities in sources and transport mechanism, while more detailed examination of the data identified notable behaviors and exceptions. Differences in regression slopes among tetra-, penta-, and decabrominated PBDEs may reflect different transport processes and the change in usage pattern. Tetra- and pentabrominated PBDEs may originate from secondary sources such as air surface exchange in a manner similar to that of the PCBs, while the deca-BDE209 formulation still has primary sources. The tribrominated BDE17 was also detected and is proposed to be a breakdown product due to atmospheric debromination processes. PBDEs had higher washout ratios than PCBs, explaining their higher concentrations compared to PCBs in precipitation (median of 6.0 and 0.5 ng L(-1) for sigmaBDE and sigmaPCB concentrations ("dissolved" + particle), respectively) than in air. The calculated yearly deposition of PBDEs and PCBs indicated that the atmospheric input of PBDEs to the Baltic Proper is currently exceeding that of the PCBs by a factor of 40, while that of the PCBs is decreasing. 相似文献
5.
Arnout D'Haese Pierre Le-Clech Sam Van Nevel Kim Verbeken Emile R. Cornelissen Stuart J. Khan Arne R.D. Verliefde 《Water research》2013
In this study, trace organics transport in closed-loop forward osmosis (FO) systems was assessed. The FO systems considered, consisted of an FO unit and a nanofiltration (NF) or reverse osmosis (RO) unit, with the draw solution circulating between both units. The rejection of trace organics by FO, NF and RO was tested. It was found that the rejection rates of FO were generally comparable with NF and lower than RO rejection rates. To assess the influence of fouling in FO on trace organics rejection, FO membranes were fouled with sodium alginate, bovine serum albumin or by biofilm growth, after which trace organics rejection was tested. A negative influence of fouling on FO rejection was found which was limited in most cases, while it was significant for some compounds such as paracetamol and naproxen, indicating specific compound-foulant interactions. The transport mechanism of trace organics in FO was tested, in order to differentiate between diffusive and convective transport. The concentration of trace organics in the final product water and the build-up of trace organics in the draw solution were modeled assuming the draw solution was reconcentrated by NF/RO and taking into account different transport mechanisms for the FO membrane and different rejection rates by NF/RO. Modeling results showed that if the FO rejection rate is lower than the RO rejection rate (as is the case for most compounds tested), the added value of the FO-RO cycle compared to RO only at steady-state was small for diffusively and negative for convectively transported trace organics. Modeling also showed that trace organics accumulate in the draw solution. 相似文献
6.
The presence of hygroscopic materials has a large impact on the moisture balance of buildings. Nowadays, HAM (Heat, Air and Moisture) models are widely used to investigate the role of hygroscopic materials on the performance of buildings, i.e. on the building envelope, the indoor climate and valuable objects stored within the building. Recently, these HAM models are being coupled to CFD (Computational Fluid Dynamics) models to study the moisture exchange between air and porous materials on a local scale (microclimates), or to BES (Building Energy Simulation) models which focus on the interaction between air and porous materials at building level. Validation of these numerical codes is essential to gain confidence in the codes. However, available experimental data are rather scarce. 相似文献
7.
M Lonneux D Delval R Bausart R Moens R Willockx P Van Mael P Declerck F Jamar H Zreik S Pauwels 《Canadian Metallurgical Quarterly》1998,19(11):1047-1054
In this study, we prospectively compared the sensitivity of PET and planar SPET (collimated gamma camera) 18F-FDG imaging in patients with lung and gastrointestinal tract cancer and analysed their respective impact on patient management. Twenty-eight patients with lung cancer and 14 with gastro-intestinal tract tumours were scanned on the same day with a PET and a collimated planar SPET gamma camera. The planar SPET procedure consisted of whole-body planar views and a tomographic acquisition centred over the torso or the abdomen, with the total imaging time within the same range as the whole-body PET procedure. The staging of lung cancer patients was accurate in 86% with PET and 64% with planar SPET. Planar SPET would have led to inappropriate therapeutic decisions in 8 of 28 patients, mainly due to undetected distant metastases. In patients with suspected gastrointestinal tract cancer, planar SPET identified 7 of 15 (47%) proven tumour sites, whereas PET identified 14 of 15 (93%). Our results suggest that collimated planar SPET cameras are not a substitute for dedicated PET scanners. The sensitivity for the detection of tumours is unacceptably low and can impair patient management. The use of multiple tomographic acquisitions could improve the sensitivity but would require a longer scanning time. 相似文献
8.
Sander Arnout Frederik Verhaeghe Bart Blanpain Patrick Wollants Roel Hendrickx Gert Heylen 《国际钢铁研究》2006,77(5):317-323
A time‐dependent thermochemical model has been developed for the electric arc furnace (EAF) process for stainless steel production. Time dependency is implemented by a stepwise input of energy and matter into an equilibrium reactor. The equilibrium calculations are performed using data from FACT‐databases and implemented using the programming library ChemApp. The material input for the model was generated by reconciliation of industrial data and the energy input is approximated from the industrial data and scaled through an efficiency factor. The model is used to calculate the evolution of temperature and composition of gas, slag and metal phases with time. Agreement of the end composition in the metal phase with industrial data is good. In the slag phase, however, Cr, Fe, Mn and Si are oxidized significantly less than expected due to excess formation of CO‐gas. The dynamics of the slag composition are examined in more detail. Here a fair agreement is reached for the main slag components. However, for Cr, Fe and Mn the model cannot predict the dynamics, which seem to be strongly kinetically controlled. The results of the equilibrium model can thus provide some insight into the kinetics of the process. 相似文献
9.
10.
van Midwoud PM Janse A Merema MT Groothuis GM Verpoorte E 《Analytical chemistry》2012,84(9):3938-3944
Microfluidic technology is providing new routes toward advanced cell and tissue culture models to better understand human biology and disease. Many advanced devices have been made from poly(dimethylsiloxane) (PDMS) to enable experiments, for example, to study drug metabolism by use of precision-cut liver slices, that are not possible with conventional systems. However, PDMS, a silicone rubber material, is very hydrophobic and tends to exhibit significant adsorption and absorption of hydrophobic drugs and their metabolites. Although glass could be used as an alternative, thermoplastics are better from a cost and fabrication perspective. Thermoplastic polymers (plastics) allow easy surface treatment and are generally transparent and biocompatible. This study focuses on the fabrication of biocompatible microfluidic devices with low adsorption properties from the thermoplastics poly(methyl methacrylate) (PMMA), polystyrene (PS), polycarbonate (PC), and cyclic olefin copolymer (COC) as alternatives for PDMS devices. Thermoplastic surfaces were oxidized using UV-generated ozone or oxygen plasma to reduce adsorption of hydrophobic compounds. Surface hydrophilicity was assessed over 4 weeks by measuring the contact angle of water on the surface. The adsorption of 7-ethoxycoumarin, testosterone, and their metabolites was also determined after UV-ozone treatment. Biocompatibility was assessed by culturing human hepatoma (HepG2) cells on treated surfaces. Comparison of the adsorption properties and biocompatibility of devices in different plastics revealed that only UV-ozone-treated PC and COC devices satisfied both criteria. This paper lays an important foundation that will help researchers make informed decisions with respect to the materials they select for microfluidic cell-based culture experiments. 相似文献