Semi-automated and fully automated mammographic density measurement and breast cancer risk prediction

The task of breast density quantification is becoming increasingly relevant due to its association with breast cancer risk. In this work, a semi-automated and a fully automated tools to assess breast density from full-field digitized mammograms are presented. The first tool is based on a supervised interactive thresholding procedure for segmenting dense from fatty tissue and is used with a twofold goal: for assessing mammographic density (MD) in a more objective and accurate way than via visual-based methods and for labeling the mammograms that are later employed to train the fully automated tool. Although most automated methods rely on supervised approaches based on a global labeling of the mammogram, the proposed method relies on pixel-level labeling, allowing better tissue classification and density measurement on a continuous scale. The fully automated method presented combines a classification scheme based on local features and thresholding operations that improve the performance of the classifier. A dataset of 655 mammograms was used to test the concordance of both approaches in measuring MD. Three expert radiologists measured MD in each of the mammograms using the semi-automated tool (DM-Scan). It was then measured by the fully automated system and the correlation between both methods was computed. The relation between MD and breast cancer was then analyzed using a case–control dataset consisting of 230 mammograms. The Intraclass Correlation Coefficient (ICC) was used to compute reliability among raters and between techniques. The results obtained showed an average ICC = 0.922 among raters when using the semi-automated tool, whilst the average correlation between the semi-automated and automated measures was ICC = 0.838. In the case–control study, the results obtained showed Odds Ratios (OR) of 1.38 and 1.50 per 10% increase in MD when using the semi-automated and fully automated approaches respectively. It can therefore be concluded that the automated and semi-automated MD assessments present a good correlation. Both the methods also found an association between MD and breast cancer risk, which warrants the proposed tools for breast cancer risk prediction and clinical decision making. A full version of the DM-Scan is freely available.     

Exposure to polycyclic aromatic hydrocarbons through consumption of edible marine species in Catalonia, Spain

The concentrations of 16 polycyclic aromatic hydrocarbons (PAHs; naphthalene, acenaphtylene, acenaphtene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, indeno[1,2,3-c,d]pyrene, dibenzo[a,h]anthracene, and benzo[g,h,i]perylene) were determined by gas chromatography-mass spectrometry in samples of 14 edible marine species (sardine, tuna, anchovy, mackerel, swordfish, salmon, hake, red mullet, sole, cuttlefish, squid, clam, mussel, and shrimp) collected in March and April 2005. These species are widely consumed by the population of Catalonia, Spain. PAH intake was also estimated for eight age and sex groups of this population. Mussel, clam, and shrimp had the highest PAH concentrations (22.4, 21.5, and 15.9 ng/g of fresh weight, respectively). In contrast, sole (2.5 ng/g of fresh weight) and cuttlefish and squid (both 3.0 ng/g of fresh weight) had the lowest mean concentrations. The highest PAH intake was found in women and girls (5.3 and 5.2 ng/kg/day, respectively), but female adolescents and female seniors had the lowest PAH intakes (3.3 ng/kg/day in both groups). The intake of benzo[a]pyrene and six other PAHs that are probably human carcinogens through consumption of these marine species would be associated with 0.27/10(6) increase in the risk of development of cancer over a 70-year life span.     

Spatial distribution and temporal variation of metals in the vicinity of a municipal solid waste incinerator after a modernization of the flue gas cleaning systems of the facility

In June 1994 and 1997, the concentrations of a number of elements were determined in soil and herbage samples collected in the vicinity of a municipal solid waste incinerator (MSWI) (Tarragona, Catalonia, Spain). In August 1997, an adaptation to the EU legislation on pollutant emissions from the stack was carried out to the incinerator. In June 1999, soil and herbage samples were collected again at the same sampling points and the levels of arsenic (As), cadmium (Cd), chromium (Cr), lead (Pb), manganese (Mn), mercury (Hg), nickel (Ni) and vanadium (V) were measured by ICP-MS or AAS with graphite furnace. The results are compared with those obtained in the 1994 and 1997 surveys. In the period 1997-1999, the only significant changes in soil levels corresponded to Cd and Pb, with decreases of 21.0% and 53.5%, respectively. In vegetation, only Mn levels showed a significant reduction, which contrasts with the notable increases found in the concentrations of As, Hg and Ni. According to the results of this survey, it seems evident that other metal emission sources in the same area of study are masking the environmental improvements carried out in the MSWI.     

PV–wind hybrid system performance: A new approach and a case study

Until now, there is no internationally accepted guideline for the measurement, data exchange and analysis of PV–Wind Hybrid Systems. As there is a need for such a tool, so as to overcome the barrier that the lack of confidence due to the absence of reliability means for the development of the market of Hybrid Systems, an effort has been made to suggest one tool for PV–Wind Hybrid Systems. The suggested guidelines presented in this work are based on the existing guidelines for PV Systems, as a PV–Wind Hybrid system can be roughly thought of as a PV System to which wind generation has been added. So, the guidelines for PV Systems are valid for the PV–Wind System, and only the part referred to wind generation should be included. This has been the process followed in this work. The proposed method is applied to a case study, the CICLOPS Project, a 5 kW PV, 7.5 kW Wind Hybrid system installed at the Isolated Wind Systems Test Site that CIEMAT owns in CEDER (Soria, Spain). This system has been fully monitored through a year and the results of the monitoring activity, characterizing the long-term performance of the system are shown in this work.     

Anodic formation of low-aspect-ratio porous alumina films for metal-oxide sensor application

Thin nanoporous anodic alumina films, of low aspect ratio (1:1), with two distinctive pore sizes and morphologies were prepared by two-step constant-current anodising of aluminium layers on SiO₂/Si substrates in 0.4 mol dm⁻³ tartaric (TA) and malonic acid (MA) electrolytes and then modified by open-circuit dissolution. The anodic films were employed as a support material for sputtering-deposition of thin WO₃ layers in view of exploiting their gas sensing properties. The films and deposits were characterized by scanning electron microscopy, X-ray diffraction and electric resistance measurements at fixed temperatures in the range of 100-300 °C upon NH₃ and CO gas exposures. Test sensors prepared from the annealed and stabilized alumina-supported WO₃ active layers were insensitive to CO but showed considerably enhanced responses to NH₃ at 300 °C, the sensitivity depending upon the anodic film nature, the pore size and the surface morphology. The increased sensor sensitivity is due to the substantially enlarged film surface area of the TA-supported WO₃ films and the nanostructured, camomile-like morphology of the MA-supported WO₃ films. Sensing mechanisms in the alumina-supported WO₃ active layers are discussed.     

Comparative effects of the chelators sodium 4,5-dihydroxybenzene-1,3-disulfonate (Tiron) and diethylenetriaminepentaacetic acid (DTPA) on acute uranium nephrotoxicity in rats

The effect of transient, global cerebral ischemia on the distribution of endothelin (ET) in blood-brain barrier (BBB) in CA1 area of hippocampus long-time after ischemia was estimated using post-embedding immunogold technique. ET-like immunoreactivity as a gold particles was localized in all compartments of the blood-brain barrier e.g. in endothelial cells, in pericytes, in periendothelial space including basement membrane, and in astroglial processes. In control animal the density of labelling in all elements of BBB in CA1 area of hippocampus was moderate. ET-like immunoreactivity (ET-like IR) was estimated 1 week-12 months after ischemia. Intense ET-like IR in all elements of BBB was noted 2 and 6 months after ischemia. A potential pathophysiological role of endothelin in cerebral vasospasm in long-time after ischemia is well documented.     

Lead in children's hair, as related to exposure in Tarragona Province, Spain

Concentrations of lead were determined in the hair of 478 school children living in an industrial and an agricultural area of Tarragona Province, Spain. The influence of age, sex, hair colour and family occupation on the children's hair lead concentration was also evaluated. Girls had more lead in their hair than boys (10.54 vs 6.55 micrograms g-1), and the lead levels decreased with age. Lead concentrations in hair with respect to hair colour decreased in the order red, blond, brown, black. Family occupation was one of the most significant factors influencing the lead content of children's hair. Although the average lead content was higher in the industrial area (9.38 micrograms g-1) than in the agricultural area (7.80 micrograms g-1), this difference was not statistically significant.     

H2-rich gases production from Catalytic Decomposition of Biogas: Viability of the process associated to the co-production of carbon nanofibers

The exploitation of biogas for different applications such as the production of hydrogen, syngas or bio-methane appears as an interesting option to valorise this renewable source. However, these processes are energetically penalized and have to offer an extra added value to become economically attractive. In this context, the Catalytic Decomposition of Biogas (CDB) has been recently proposed as a potential alternative to be considered for biogas valorization. In this process, syngas (H₂ and CO) and valuable carbon nanofibers (CNFs) are simultaneously generated. The know-how obtained in previous studies allowed us to select the optimum experimental conditions to simulate the implementation of a CDB continuous process using a fluidized bed reactor. The process consisted in a cyclic operation, by which after the completion of the each run, carbonaceous material produced (containing ca. 6% of catalysts) was withdrawn from the reactor, and the required amount of fresh catalyst to keep catalyst inventory constant was added to the reactor. Characterization of carbonaceous material carried out by several techniques revealed the prevalence of fishbone-like CNF with very interesting textural and structural properties. Mass and energy balances carried out pointed out that the viability of the CDB process depends on the co-production of valuable CNFs that can be used in different applications.