A new monitoring system for piping systems in fossil fired power plants

A CEC-funded project has been performed to tackle the problem of producing an advanced Life Monitoring System (LMS) which would calculate the creep and fatigue damage experienced by high temperature pipework components. Four areas were identified where existing Life Monitoring System technology could be improved:

1. 1. the inclusion of creep relaxation

2. 2. the inclusion of external loads on components

3. 3. a more accurate method of calculating thermal stresses due to temperature transients

4. 4. the inclusion of high cycle fatigue terms.

The creep relaxation problem was solved using stress reduction factors in an analytical in-elastic stress calculation. The stress reduction factors were produced for a number of common geometries and materials by means of non-linear finite element analysis. External loads were catered for by producing influence coefficients from in-elastic analysis of the particular piping system and using them to calculate bending moments at critical positions on the pipework from load and displacement measurements made at the convenient points at the pipework. The thermal stress problem was solved by producing a completely new solution based on Green's Function and Fast Fourier transforms. This allowed the thermal stress in a complex component to be calculated from simple non-intrusive thermocouple measurements made on the outside of the component. The high-cycle fatigue problem was dealt with precalculating the fatigue damage associated with standard transients and adding this damage to cumulative total when a transient occurred.

The site testing provided good practical experience and showed up problems which would not otherwise have been detected.     

The effects of pressure on the isothermal fluid behavior of bituminous coals

An investigation into the effects of pressure (helium gas) on the isothermal fluid behavior includes: (1) the effect of pressure on the rate of melting and coking as evidenced by the rate constants k(melt) and k(coke); (2) the effect of pressure on the energies of activation of melting and coking; (3) the effects of pressure on the characteristic times; (4) the effects of pressure on the maximum isothermal fluidity. Results from the effects of pressure on k(melt) revealed that it was generally the high total sulfur, low nitrogen, low reactives/mineral matter ratio, medium rank coals which show the greatest increase in k(melt), whereas the highest rank coals show the least decrease in k(coke). The energies of activation of melting and coking were not significantly affected by pressure. The investigation also reveals increases or decreases in the respective times of softening, maximum fluidity, resolidification and total time of fluid behavior under isothermal pressurized conditions. There appears the possibility that these shifts may be rank dependent. Additionally, the lower rank coals show the largest relative increase in their fluidities when subjected to pressure. Empirical relationships were derived in order to quantitatively predict the maximum isothermal fluidity for most (fluid) coals at a given pressure.     

Properties of poly(ethylene terephthalate)–poly(ethylene naphthalene 2,6‐dicarboxylate) blends with montmorillonite clay

The production and properties of blends of poly(ethylene terephthalate) (PET) and poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) with three modified clays are reported. Octadecylammonium chloride and maleic anhydride (MAH) are used to modify the surface of the montmorillonite–Na⁺ clay particles (clay–Na⁺) to produce clay–C18 and clay–MAH, respectively, before they are mixed with the PET/PEN system. The transesterification degree, hydrophobicity and the effect of the clays on the mechanical, rheological and thermal properties are analysed. The PET–PEN/clay–C18 system does not show any improvements in the mechanical properties, which is attributed to poor exfoliation. On the other hand, in the PET–PEN/clay–MAH blends, the modified clay restricts crystallization of the matrix, as evidenced in the low value of the crystallization enthalpy. The process‐induced PET–PEN transesterification reaction is affected by the clay particles. Clay–C18 induces the largest proportion of naphthalate–ethylene–terephthalate (NET) blocks, as opposed to clay–Na⁺ which renders the lowest proportion. The clay readily incorporates in the bulk polymer, but receding contact‐angle measurements reveal a small influence of the particles on the surface properties of the sample. The clay–Na⁺ blend shows a predominant solid‐like behaviour, as evidenced by the magnitude of the storage modulus in the low‐frequency range, which reflects a high entanglement density and a substantial degree of polymer–particle interactions. Copyright © 2005 Society of Chemical Industry     

Kinetic model for water/oil absorption of mesquite gum (Prosopis juliflora) and gum arabic (Acacia senegal)

The water and oil uptake of mesquite and arabic gums in powdered form was studied at temperatures of 23, 35 and 45°C. A previously proposed equation to predict osmotic equilibrium was tested using the experimental data with both gums and a good statistical fit was obtained. Mesquite gum showed the highest water and oil absorption at all temperatures studied. Temperature dependence of the reciprocal of the S₁ and WL_∞ were determined using an Arrhenius equation. The activation energy for water and oil absorption for gum arabic was 21.98 and 39.57 kJ mol⁻¹, compared to that of mesquite gum having values of 15.79 and 46.16 kJ mol⁻¹, respectively. A second order kinetic model was obtained for water and oil absorption for both gums.     

Optimization of the properties obtained by quenching in martensitic stainless steels X30-40Cr13 and X40-60CrMoV14

An experimental study of the effects produced by different parameters of the heat-quenching cycle permitted the optimization of the properties typical of these martensitic stainless steels: hardness and corrosion resistance. The results obtained demonstrate that the heating temperatures currently used in industrial quenching treatment of these steels should be modified.     

Propagation of flicker in electric power networks due to windenergy conversions systems

Wind energy conversion systems (WECS) produce fluctuating output power, which may cause voltage fluctuations and flicker. Flicker assessment in networks may be difficult since its evaluation requires long computing time and special procedures to calculate the flicker severity index, Pst. In this paper, a frequency domain method to study flicker propagation is presented. This method is based on propagation of frequency components from WECS output currents throughout the grid. In this way, a fast flicker analysis in a network of any size can be performed. Also, an algorithm for flicker measurement in the frequency domain, which allows Pst calculation, is proposed. Several study cases have been performed, and results have been compared with time domain simulations, showing good agreement between them     

Effects of growth with ethanol on fermentation and membrane fluidity of Saccharomyces cerevisiae

Saccharomyces cerevisiae HSc was grown with ethanol at concentrations up to 10% (v/v). The immediate effects of additions of externally added ethanol on CO₂ production and O₂ consumption of washed organisms were studied by stopped-flow membrane inlet quadrupole mass spectrometry. Fermentative activities of organisms grown with ethanol (0–5% v/v) showed similar sensitivities to inhibition by ethanol, whereas those grown with 10% (v/v) ethanol had become protected and were markedly less sensitive. The fluidity of subcellular membrane fractions was measured by determination of the temperature dependence of the rotational order parameter of the spin label 5-doxyl stearic acid (free radical) by electron spin resonance. Mitochondria prepared from yeasts grown with 0, 7 and 9% (v/v) ethanol showed similar overall fluidity, although differences in temperature-dependent behaviour indicate altered lipid composition or lateral phase separations. On the other hand the microsomal fraction from organisms grown with 9% ethanol showed a remarkable increase in fluidity. These data suggest that the protective effects of growth with ethanol near the limit of tolerance on fermentative activities may arise from altered plasma membrane fluidity properties.     

Designing the MPC105 PCI bridge/memory controller

The MPC105 peripheral component interconnection bridge/memory controller provides a platform-specification-compliant bridge between Power PC microprocessors and the PCI bus. With it, designers can create systems using peripherals already designed for a variety of standard PC interfaces. This bridge chip also integrates a secondary cache controller and high-performance memory controller that supports DRAM or synchronous DRAM and ROM or flash ROM