A 1.8 Gb/s GaAs optoelectronic universal switch LSI withmonolithically integrated photodetector and laser driver

A high-speed monolithic optical interface switch LSI is developed using a GaAs MSM photodetector and large-scale integrated electric circuits. This LSI operates universally as a 1.8 Gb/s optical-input/optical-output four-channel time-division switch, a 1.8 Gb/s optical-input/electrical-output 1:4 demultiplexer, a 2.0 Gb/s electrical-output 4:1 multiplexer, and a 2.8 Gb/s electrical-input/electrical-output 4×4 space-division switch. It uses a new multistage 2×2 switch block with small hardware and high-speed operation. It can be expanded to a 16×16 optical-input/optical-output time-division switch operating at up to 1.8 Gb/s for broadband-ISDN     

66/77-kV C-GIS using composite insulation in SF6 gas

A second-generation model of cubicletype gas-insulated switchgear (C-GIS) with composite insulation incorporating SF₆ gas has been developed. The design does not require a gas process in field assembly; it has high reliability and its installation is more rapid; and a further reduction in size is achieved. The design principles are described in detail.     

High-speed picosecond optical pulse compression from gain-switched 1.3-µm distributed feedback-laser diode (DFB-LD) through highly dispersive single-mode fiber

Picosecond optical pulse compression characteristics of chirped pulses from gain-switched distributed feedback-laser diodes (DFB-LD) transmitting through highly dispersive media are studied theoretically and experimentally. It is clarified theoretically that gain-switched chirped pulses can be compressed to about a 0.7-time bandwidth product by normal dispersion of the dispersive media and that the optimum dispersion value to obtain a minimum compressed pulse is proportional to the square of original pulsewidth. Through a dispersion, shifted single-mode fiber with -48-ps/nm normal dispersion at a 1.3-μm wavelength, gain-switched 30-ps (FWHM) pulses from a directly modulated 1.3-μm DFB-LD at a 4.4-GHz repetition rate have been successfully compressed to 6.4-ps optical pulses with a 0.86-time bandwidth product. Experimental results agree with the theoretical analysis.     

Pharmacological action of anabolic steroids

Anabolic steroids (AS) are derivatives of androgen (testosterone and its close relatives). AS have been primarily developed for clinical use as anabolic agents with the expectation that they would be relatively less androgenic than testosterone and its close relatives. Various AS are applied to clinical use, but none is free from androgenic activity. Relation between chemical structure and anabolic-androgenic potency of various AS is summarized. AS action in erythropoiesis operates through increased porphyrin formation and production of erythropoietin. Mechanism of AS action in bone formation is suggested that AS potentiate intestinal 1.25(OH)2D receptors. Identification of androgen receptors in normal human osteoblast-like cells suggest that AS act directly on receptor-mediated mechanism. The other action of AS is briefly summarized.     

Ectopic accumulation of 99mTc-HMDP in primary lung cancer in comparison with CT findings

Hypertension attributable to pheochromocytoma is a very attractive model for the elucidation of the pathogenesis of hypertension. Sixteen different point mutations in the RET proto-oncogene and 30 mutations in the Von Hippel-Lindau (VHL) tumor suppressor gene have been identified so far associated with expression of pheochromocytoma. Each of these mutations initiates either the syndrome of multiple endocrine neoplasia type 2 (MEN 2) (MEN 2A and MEN 2B) or the VHL disease. Certain mutations in both genes are associated with the presence of pheochromocytoma. In general, these pheochromocytomas produce catecholamines that result in hypertension. Therefore, analysis for germline mutations in these genes are of practical value, because susceptibility to these diseases can be predicted in as yet clinically unaffected relatives.     

A video codec LSI for high-definition TV systems withone-transistor DRAM line memories

A video codec LSI for high-definition television (HDTV) systems has been developed. By using a time-compressed integration encoding technique, it converts a 20.0-MHz bandwidth luminance signal and two 5.0-MHz chrominance signals into a compressed image signal at 48.6-MHz sampling frequency. It is useful in many HDTV application systems, such as 400-Mb/s digital transmission system, a video disk player system, or an analog transmission system. Over 288000 elements, including a 52-kb one-transistor DRAM (dynamic random access memory) line memory specially developed for this LSI, were integrated on a 12.16×12.10-mm² chip. A standard cell layout method and a 1.2-μm CMOS logic LSI process were used     

A copper/polyimide Metal-base packaging technology

A unique substrate MCPM (Mitsubishi Copper Polyimide Metal-base) technology has been developed by applying our basic copper/polyimide technology.¹ This new substrate technology MCPM is suited for a high-density, multi-layer, multi-chip, high-power module/package, such as used for a computer. The new MCPM was processed using a copper metal base (110 × 110 mm), full copper system (all layers) with 50-μm fine lines. As for pad metallizations for the IC assembly, we evaluated both Ni/Au for chip and wire ICs and solder for TAB ICs. The total number of assembled ICs is 25. To improve the thermal dispersion, copper thermal vias are simultaneously formed by electro-plating. This thermal via is located between the IC chip and copper metal base, and promotes heat dispersion. We employed one large thermal via (4.5 mm^?) and four small vias (1.0 mm^?) for each IC pad. The effect of thermal vias and/or base metal is simulated by a computer analysis and compared with an alumina base substrate. The results show that the thermal vias are effective at lowering the temperature difference between the IC and base substrate, and also lowering the temperature rise of the IC chip. We also evaluated the substrate’s reliability by adhesion test, pressure cooker test, etc.     

Structural characterization of 1,2-polybutadiene by 13C-n.m.r. spectroscopy: 2. Sequence distribution of 1,2-unit in hydrogenated polybutadienes

The configurational sequences of 1,2-unit in a series of hydrogenated syndiotactic 1,2-polybutadienes were determined in relation to the sequence distribution of 1,2- and 1,4-units on the basis of the ¹³C-n.m.r. signal assignment of the methyl carbons. The observed triad distributions of 1,2- and 1,4-units and configurational distributions of the 1,2-unit are in good agreement with the calculated distributions from transition probabilities. The number average sequence lengths of the 1,2-unit and the 1,2-unit in the racemic addition are 5.7 to 8.0 and 4.1 to 5.4, respectively. From the extrapolation of the plot of the number average sequence length against the crystallinity of the starting 1,2-polybutadienes, the minimum sequence length for crystallization is estimated to be 3.7 for the 1,2-unit in the racemic addition.