The initial stages of oxide growth on titanium are examined in a recently developed commercial alkaline pyrophosphate/aluminate electrolyte of interest for plasma electrolytic oxidation of light metal alloys. Constant current anodizing was employed, with resultant films examined by scanning and transmission electron microscopies and Rutherford backscattering spectroscopy. The initial film is relatively uniform and composed of TiO2, with low concentrations of aluminium and phosphorus species incorporated from the electrolyte. With increase in voltage the film breaks down locally, and regions of original and modified film develop simultaneously, with the latter occupying more of the surface as the voltage rises. Porous regions due to dielectric breakdown also become increasingly evident. At 240 V, sparking commences, and the surface reveals extensive, relatively uniform porosity, with the coating now containing much enhanced concentrations of aluminium and phosphorus species compared with the coating at lower voltages. The films develop at low efficiency due to generation of oxygen. The oxygen is produced within the original film material and at sites of dielectric breakdown. The former type of film develops a two-layered morphology, with an outer layer of amorphous TiO2 and an inner layer with numerous fine and course cavities. The cavities are due to the generation of oxygen that may be associated with the formation of anatase in the inner layer. 相似文献
The oxygen reduction reaction (ORR) is essential in research pertaining to life science and energy. In applications, platinum-based catalysts give ideal reactivity, but, in practice, are often subject to high costs and poor stability. Some cost-efficient transition metal oxides have exhibited excellent ORR reactivity, but the stability and durability of such alternative catalyst materials pose serious challenges. Here, we present a facile method to fabricate uniform CoxOy nanoparticles and embed them into N-doped carbon, which results in a composite of extraordinary stability and durability, while maintaining its high reactivity. The half-wave potential shows a negative shift of only 21 mV after 10,000 cycles, only one third of that observed for Pt/C (63 mV). Furthermore, after 100,000 s testing at a constant potential, the current decreases by only 17%, significantly less than for Pt/C (35%). The exceptional stability and durability results from the system architecture, which comprises a thin carbon shell that prevents agglomeration of the CoxOy nanoparticles and their detaching from the substrate.
Plastic resin pellets (small granules 0.1-0.5 centimeters in diameter) are widely distributed in the ocean all over the world. They are an industrial raw material for the plastic industry and are unintentionally released to the environment both during manufacturing and transport. They are sometimes ingested by seabirds and other marine organisms, and their adverse effects on organisms are a concern. In the present study, PCBs, DDE, and nonylphenols (NP) were detected in polypropylene (PP) resin pellets collected from four Japanese coasts. Concentrations of PCBs (4-117 ng/g), DDE (0.16-3.1 ng/g), and NP (0.13-16 microg/g) varied among the sampling sites. These concentrations were comparable to those for suspended particles and bottom sediments collected from the same area as the pellets. Field adsorption experiments using PP virgin pellets demonstrated significant and steady increase in PCBs and DDE concentrations throughout the six-day experiment, indicating that the source of PCBs and DDE is ambient seawater and that adsorption to pellet surfaces is the mechanism of enrichment. The major source of NP in the marine PP resin pellets was thought to be plastic additives and/or their degradation products. Comparison of PCBs and DDE concentrations in mari 相似文献
The emergence of synchrony in the activity of large, heterogeneous networks of spiking neurons is investigated. We define the robustness of synchrony by the critical disorder at which the asynchronous state becomes linearly unstable. We show that at low firing rates, synchrony is more robust in excitatory networks than in inhibitory networks, but excitatory networks cannot display any synchrony when the average firing rate becomes too high. We introduce a new regime where all inputs, external and internal, are strong and have opposite effects that cancel each other when averaged. In this regime, the robustness of synchrony is strongly enhanced, and robust synchrony can be achieved at a high firing rate in inhibitory networks. On the other hand, in excitatory networks, synchrony remains limited in frequency due to the intrinsic instability of strong recurrent excitation. 相似文献
Removal of numerous classes of pharmaceuticals from the municipal and industrial wastewater, using conventional wastewater treatment, is incomplete and several studies suggested that improvement of this situation would require the application of advanced treatment techniques. This is particularly important for the treatment of industrial effluents, released from pharmaceutical industries, which can contain rather high concentrations of antimicrobials. The aim of this work was to evaluate membrane bioreactors (MBRs), nanofiltration, reverse osmosis and ozonation, as well as their combinations, for the removal of antimicrobials from a synthetic wastewater which simulated highly contaminated industrial effluents. The study was performed using a mixture of four important classes of antimicrobials, including sulfonamides (SA), fluoroquinolones (FQ), macrolides (MAC) and trimethoprim (TMP). Performance of two different types of MBRs, Kubota and Zenon, was evaluated under different regimes regarding hydraulic retention time, total organic load and total nitrogen load. It was shown that elimination of SA in MBR treatment was very efficient, while the elimination of MAC, FQ, and TMP was incomplete. A mass balance of these contaminants in MBR suggested that microbial transformation represented the main mechanism, while only a small percentage was eliminated from the aqueous phase by adsorption onto sludge particles. Nanofiltration and reverse osmosis achieved high elimination rates however produced highly contaminated concentrate. High removal was achieved using ozonation, but further research is needed to characterize formed ozonation products. 相似文献
Transition metals incorporated into polymers lead to unusual or improved physical properties that significantly differ from those of purely organic polymers. A simple and practicable incorporation of diverse transition metals into any available polymer would make an important contribution to overcome some of the synthetic difficulties of metal‐polymer hybrid materials. Here, it is demonstrated that atomic layer deposition (ALD) can be a promising means to resolve some of those difficulties. It is found that even polytetrafluoroethylene (PTFE) with its great physical and chemical stability can be easily transformed into a transition metal–PTFE hybrid material simply by applying a metal‐oxide ALD process to PTFE. Upon metal incorporation into the PTFE, the molecular structure as well as mechanical properties (tensile behavior) of PTFE were observed to significantly change. For a better understanding of the changes to the material, experimental investigations using Raman spectroscopy, attenuated‐total‐reflection Fourier‐transform infrared spectroscopy, wide‐angle X‐ray diffraction, and energy‐dispersive X‐ray analysis were performed. In addition, with density functional theory calculations, potential bonding states of the incorporated metal into PTFE were modeled and predicted. The ALD‐based vapor‐phase approach for metal incorporation into a polymer could bring about rapid progress in the research area of metal–polymer hybrid materials. 相似文献
We have developed a materials system composed of liquid multifunctional fluorinated acrylate monomers that achieves very low absorption losses within both datacom and telecom wavelength ranges. Identified structure–property relationships have guided the design of polymers that are optimized with respect to their inherent materials properties and their ability to be processed into low‐loss optical waveguides. Together these co‐developed materials and processes combine to produce waveguides that have propagation losses equivalent to planar glass guides, and significantly reduced polarization dependence and improved thermal response needed for the performance of thermo‐optic devices. Extensive environmental studies have demonstrated robustness well beyond that required for normal operating conditions. 相似文献
Detection of recurrence of medullary thyroid carcinoma (MTC) remains a diagnostic problem. Increased serum tumour marker levels frequently indicate recurrence while conventional imaging techniques (CIT) are non-diagnostic. In this study, we performed indium-111 octreotide scintigraphy and CIT in a series of 20 patients with MTC presenting with elevated serum tumour markers after surgery. 111In-octreotide whole-body studies detected 15 pathological uptake foci in 11 of the 20 patients studied and CIT detected 17 lesions in 11 of the 20 patients. Ten patients underwent reoperation, five of them with positive 111In-octreotide scintigraphy and CIT and two with positive isotopic exploration and negative CIT. Surgical findings demonstrated that the results of isotopic study and CIT had been false-positive for MTC in one case (sarcoidosis). The six patients with true-positive 111In-octreotide studies had significantly higher basal calcitonin (CT) and carcinoembryonic antigen (CEA) levels than the patients with negative isotopic studies. The expression of somatostatin receptor (SSTR) subtypes by PC-PCR could be investigated in four cases with a positive isotopic study. Among the three cases with a true-positive study, SSTR2, the SSTR subtype that preferentially binds to the somatostatin analogue octreotide, was detected in two, SSTR5 was demonstrated in the three, and SSTR3 was detected in one. No subtype of SSTR was detected in the case with a final diagnosis of sarcoidosis. We conclude that 111In-octreotide has limited sensitivity in detecting recurrence in patients with MTC, although its sensitivity may improve with high serum CT levels. This radionuclide imaging technique should be employed when conventional imaging techniques are negative or inconclusive or when the presence of somatostatin receptors may provide the basis for treatment with somatostatin analogues. 相似文献