Theoretical and Experimental Study of Water Transport in a Hollow Cylinder Applied to the Drying of Round Squid Mantle

Until now, attention has been focused solely in the drying of squid mantle from an experimental point of view, neglecting the transport phenomenon studies of water in squid muscle. This work studies the drying of squid mantle (Loligo brasiliensis), previously salted and smoked by liquid smoking (hickory extract), using a tubular dryer in closed cycle with a silicagel fixed bed in series. The mass transfer phenomenon during drying was studied, based on the Fick's second law, with the effective diffusivity supposed constant, which enabled an analytical solution to the problem. The drying curve calculated with the resulting equation was compared with experimental data. The model was applied to a hollow cylinder geometry (round squid mantle), with its internal surface isolated from the drying environment by a plastic film. The latter was given a tubular form and introduced inside the mantle cavity (impervious wall boundary condition).     

Ultrasound‐activated Knoevenagel condensation of malononitrile with carbonylic compounds catalysed by alkaline‐doped saponites

α,β‐Unsaturated nitriles have been synthesized by Knoevenagel condensation of a carbonylic compound with malononitrile, assisted by sonochemical irradiation. Two alkaline‐promoted clays (Li⁺‐ and Cs⁺‐exchanged saponites) have been employed as catalysts. The influence of the carbonylic compound (benzaldehyde or cyclohexanone) and the use of a solvent on the catalytic activity have been studied. Remarkable increase in the conversion values has been found when the reaction is activated by ultrasound, as compared with the thermal activation. In this green, solvent‐free procedure, α,β‐unsaturated nitriles have been produced in very high yields (97%) when the Cs⁺‐saponite is used as catalyst. Copyright © 2004 Society of Chemical Industry     

Asymptotic stabilization of some equilibria of an underactuated underwater vehicle

The stabilization problem for selected relative equilibria of an underactuated rigid body, modelling a simple underwater vehicle, moving in an ideal fluid is addressed. State feedback control laws achieving local asymptotic stability of a forward motion and of a diving/rising with forward/reverse motion are proposed. The control design exploits the Hamiltonian nature of the system to be controlled and it is based on the so-called interconnection and damping assignment (IDA) procedure. Simulation results complete the work.     

Sheet molding compound characterization using spiral flow

Sheet molding compound (SMC) is a fiber‐reinforced polymeric composite. It is often used in automotive, marine, and industrial applications over other materials because of its high strength to density ratio, resistance to corrosion, and low cost. There is a demand in the SMC industry to be able to characterize SMC processability. This is particularly true for heavy truck body panels, one of the fastest growing applications of SMC. Because of their large size and high strength requirement, the molding forces have a major influence in the molding cycle. Also because of the long flow paths involved, the ability of the paste to carry glass needs to be properly characterized when developing new SMC materials. In this article, we demonstrate the benefits of using spiral flow as a processability tester. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Total Energy Shaping Control of Mechanical Systems: Simplifying the Matching Equations Via Coordinate Changes

Total energy shaping is a controller design methodology that achieves (asymptotic) stabilization of mechanical systems endowing the closed-loop system with a Lagrangian or Hamiltonian structure with a desired energy function - that qualifies as Lyapunov function for the desired equilibrium. The success of the method relies on the possibility of solving two PDEs which identify the kinetic and potential energy functions that can be assigned to the closed loop. Particularly troublesome is the partial differential equation (PDE) associated to the kinetic energy which is nonlinear and inhomogeneous and the solution, that defines the desired inertia matrix, must be positive-definite. In this note, we prove that we can eliminate or simplify the forcing term in this PDE by modifying the target dynamics and introducing a change of coordinates in the original system. Furthermore, it is shown that, in the particular case of transformation to the Lagrangian coordinates, the possibility of simplifying the PDEs is determined by the interaction between the Coriolis and centrifugal forces and the actuation structure. The examples of pendulum on a cart and Furuta's pendulum are used to illustrate the results.     

Determination of the Secondary Bjerknes Force in Acoustic Resonators on Ground and in Microgravity Conditions

We propose an experimental methodology to determine the secondary Bjerknes force between rigid particles. Measurements done for different particles sizes showed acoustical inter particles interactions. We use and extend the methodology presented in a previous work. The determination of this force will lead us a better understanding of the aggregation process in acoustic resonators. We report in this work, the results of two parabolic flights campaigns performed at the Airbus A300 ZERO-G (Novespace, France).     

Migration of human and mouse primordial germ cells and colonization of the developing ovary: an ultrastructural and cytochemical study

This review is an account of the origin and migratory events of primordial germ cells until their settlement in the gonad before sexual differentiation in the human as well as mice. In this context, the morphodynamic characteristics of the migration of the primordial germ cells, the macromolecular characteristics of the extracellular matrix of the migratory pathway, and the factors involved in the germ cell guidance have been analyzed and discussed in the light of recent advances in this field, by means of immunocytochemical procedures. The events prior to gonadal morphogenesis and the origin of the somatic cell content of the human gonadal primordium have been also analyzed. In particular, evidences are presented showing that cells derived from the coelomic epithelium and mesenchyme are at the origin of the somatic components of the gonadal primordium, and that a mesonephric cell contribution to the generation of somatic cell components of the genital ridge in humans should be discarded due to the morphological stability of the different nephric structures during the period preceding the sexual differentiation of the gonad.     

mfERG_LAB: Software for processing multifocal electroretinography signals

The multifocal electroretinography technique consists of performing sectorized light excitation of the retina and capturing the resulting evoked potential. This provides functional localized information about the state of the retinal neurons. Analysis of multifocal electroretinography signals can be used for diagnosing different types of optic neuropathies (glaucomatous, demyelinating and ischemic ethiology). In order to obtain a reliable diagnosis, it is necessary to apply advanced processing algorithms (morphological, frequency and time-frequency analysis, etc.) to the multifocal electroretinography signal. This paper presents a software application developed in MATLAB(?) (MathWorks Inc., MA) designed to perform advanced multifocal electroretinography signal analysis and classification. This intuitive application, mfERG_LAB, is used to plot the signals, apply various algorithms to them and present the data in an appropriate format. The application's computational power and modular structure make it suitable for use in clinical settings as a powerful and innovative diagnostic tool, as well as in research and teaching settings as a means of assessing new algorithms.     

Online motion recognition using an accelerometer in a mobile device

This paper introduces a new method to implement a motion recognition process using a mobile phone fitted with an accelerometer. The data collected from the accelerometer are interpreted by means of a statistical study and machine learning algorithms in order to obtain a classification function. Then, that function is implemented in a mobile phone and online experiments are carried out. Experimental results show that this approach can be used to effectively recognize different human activities with a high-level accuracy.     

Brazilian articles in international journals on Limnology

Summary  We assessed the contribution of Brazilian limnologists (freshwater ecologists) in international journals in the period 1970-2004. Brazilian contribution was low and regular in the 1970's, but increased steeply after 1980 with no signs of stabilization until the present. Articles authored by Brazilians tend to be less cited than articles authored by non-Brazilians, although this difference is reduced in co-authored articles with international researchers.  Brazilian articles are not distributed homogenously among the sub-areas of Limnology, but present some biases that can be explained by intellectual legacy. Brazil has invested since the 1970's in establishing postgraduate courses in Brazil and in the last years has turned the focus to a better qualification of these courses. We believe these are the main reasons for the conspicuous development of Brazilian Limnology.