Analysis of conduction heat transfer problems in steady, 2D regions with circular holes using a special boundary integral method

A special boundary integral method developed for two-dimensional regions containing circular holes is used to calculate temperature and heat transfer on the boundaries of several selected regions. The geometrical configuration of the region is arbitrary and convective boundary conditions are assumed. An important feature of the method is analytic representation of temperature and its normal derivative on the interior circular holes in the form of a harmonic series. This makes the application of the boundary integral method convenient and free from conditioning problems associated with small interior boundaries. Heat transfer from circular isothermal interior holes are calculated for several illustrative examples using three terms of the harmonic series representation for heat transfer at each of the circular boundaries. The results are presented and discussed.     

Optimizing the design of railway tank cars to minimize accident-caused releases

The design of vehicles transporting hazardous materials has important public safety and economic implications. Conventional wisdom among industry and government has held that a thicker tank on railroad tank cars and trucks reduces risk. However, a thicker tank increases vehicle weight and thus leads to an increase in the number of shipments required to transport the same amount of product and consequently greater exposure to accidents. In this research we develop a model that analyzes the tradeoff between increased damage resistance and greater exposure to accidents in which the objective function is minimization of the probability of release. The model accounts for the reduction in tank car release probability as a function of tank thickness, and the increased exposure to accidents that occurs due to the increased number of shipments needed for the heavier car. Three variables affecting this optimal thickness are considered in this paper: the volumetric capacity of the tank, the probability of release from other, non-tank sources, and the weight capacity of the car. Sensitivity analyses using the model indicate that for any particular configuration of tank car there is an optimal thickness. This optimal thickness is affected by several factors and there is no single optimum for all tank cars.     

Heat rejection limits of air cooled plane fin heat sinks for computer cooling

Current desktop computers typically use fan-heat sinks for cooling the CPU, referred to as active heat sinks. This work seeks to determine the heat rejection limits for such fan-heat sinks, within specific fan and heat sink space limits. A fixed volume, 80 /spl times/ 60 /spl times/ 50 mm is chosen as the limiting dimensions, which includes the fan volume. The present work addresses plane fin heat sinks, on which a typical 60 mm fan is mounted. Both duct flow and impinging flow are considered. Analytically based models are used to predict the optimum geometry (minimum convection resistance) for plane fins with duct and impinging flow configurations. Also assessed are the effects of increased fan speed (up to 25%) and heat sink base size (33% increase) on air-cooling limits in duct and impinging flow. Tests on fan-heat sinks are done to validate the predictions. Optimization is also done for an enhanced (offset-strip) fin geometry in duct flow. The plane fin is found to outperform the enhanced geometry.     

Polymer transcrystallinity induced by carbon nanotubes

In this work, we provide the evidence of polymer transcrystallinity in the presence of carbon nanotubes (CNTs). The interfacial morphology of carbon nanotube fiber-polypropylene matrix is investigated by means of polarized optical microscopy (POM), wide-angle X-ray diffraction (WAXD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The supramolecular microstructures of polypropylene transcrystals induced by the nanotube fiber are observed in the range of isothermal crystallization temperatures from 118 °C to 132 °C. The dynamic process of transcrystallization is analyzed by using the theory of heterogeneous nucleation. Microstructure analysis shows that the nanotubes can nucleate the growth of both α- and γ-transcrystal, and α-transcrystals dominate the overall interfacial morphology. Close to the nanotube fiber surface, a cross-hatched lamellar microstructure composed of mother lamellae and daughter lamellae is observed.     

Equivalent refractive index of MQW waveguides

In this paper, we have proposed some new numerical and semi-analytical methods for developing an equivalent three-layer model of an MQW waveguide. The waveguiding properties like effective index, field distribution, and fractional power within the core of the waveguide of these equivalent structures are compared with those of previously reported equivalent methods. These results are also compared with the results obtained from the exact multilayer analysis of the MQW waveguide. The waveguiding properties are accurately predicted by the semi-analytical method using variational analysis, and the computational effort is significantly reduced. The use of the three-layer equivalent is illustrated in obtaining an estimation of the waveguide losses and is used to study the effect of nonlinearity     

Residual stress gradients along ion implanted zones — cubic crystals

Large internal strains and stresses can be produced by low temperature implantation over small distances from the free surface in a thick substrate. These are typically non-uniform and have large composition gradients. In dilute bcc solutions, containing unclustered interstitial implants, the residual macroscopic strains may be treated as isotropic. The calculation of residual strain (or stress) is based upon anisotropic elasticity theory and internal stress is given in terms of the dipole tensor for individual defects in single crystal films. In a completely elastic zone, forces act to maintain a rigid outside surface and cause the strain distribution to be zero along directions parallel to the free surface. This produces a strain magnification along the perpendicular direction from Poisson contractions. If the implanted zone is completely relaxed by plastic deformation, the strains are described by the free expansion strains due to both implants and lattice damage. There is no angular dependence of the free expansion strain in this extreme condition. One can determine whether a zone is completely elastic, completely relaxed by plastic deformation, or in some intermediate state from plots of strain against sin², where is the angle of tilt relative to the surface normal. These results may be obtained from X-ray Bragg intensity data by measuring shifts and line broadening from (hkl) planes at different tilt angles. Theoretical results are given for both single crystal and polycrystalline materials in terms of residual strain and stress.     

Thermodynamic interactions of branched polyethylene in polar and nonpolar systems

The thermodynamic properties of polymer solutions are frequently described in terms of the Flory-Huggins equation. This equation includes a parameter χ, which depends upon the intermolecular forces acting between the molecules in a solution. The experimental determination of χ was performed by an improved microtechnique and extended to a wide range of polar and nonpolar diluents of polyethylene. Careful correlations are prescribed for calculating χ from pure-component properties; they are based on an extension of the Hildebrand-Scatchard theory of solutions and on the theory of intermolecular forces. Polar (τ) and nonpolar (δ) solubility parameters are presented for a variety of solvents. For polyethylene—nonpolar solvent systems we have emphasized the factor deciding the sign of heat of mixing, while for polyethylene-polar solvent systems we have determined the contribution of dipole-induced dipole interactions ψ (δτ) in interchange-energy density B and, hence, χ.     

Survey of denoising,segmentation and classification of magnetic resonance imaging for prostate cancer

Multimedia Tools and Applications - Prostate cancer (PCa) has become the second most dreadful cancer in men after lung cancer. Traditional approaches used for treatment of PCa were manual, time...     

Memory leak detection in Plumbr

Platforms with automatic memory management, such as the JVM, are usually considered free of memory leaks. However, memory leaks can happen in such environments, as the garbage collector cannot free objects, which are not used by the application anymore, but are still referenced. Such unused objects can eventually fill up the heap and crash the application. Although this problem has been studied extensively, nevertheless, there are still many rooms for improvement in this area. This paper describes the statistical approach for memory leak detection, as an alternative, along with a commercial tool, Plumbr, which is based on the method. The tool is later analyzed with three case studies of real applications and in the process also analyzes strengths and weaknesses of the statistical approach for memory leak detection. Copyright © 2014 John Wiley & Sons, Ltd.