We demonstrate the structural evolution of polymorphic phases in Al2O3-inserted SrMnO3 ceramics synthesized by solid state reaction. While the 4H-hexagonal phase is predominant in pure SrMnO3 ceramics, a small amount of 6H-hexagonal polymorph is identified in addition to the primary 4H-hexagonal SrMnO3 and the secondary hexagonal SrAl2O4 phases in the as-sintered ceramics, evidenced by x-ray diffraction and subsequent Rietveld refinement analyses. The existence of the 6H-hexagonal SrMnO3 phase is corroborated using Raman spectroscopy. The chemical compositions and electronic structures of the Al2O3-inserted SrMnO3 compounds are also examined using energy dispersive spectroscopy and x-ray photoelectron spectroscopy, respectively. The first-principles calculations reveal that there is no clear difference between the total energies of 4H- and 6H-hexagonal polymorphs regardless of the presence/absence of Sr and oxygen vacancies. Possible origins are discussed with the estimation of actual strain based on the refined lattice parameter of 6H SrMnO3. 相似文献
A computer-aided diagnostic (CAD) system for effective and accurate pulmonary nodule detection is required to detect the nodules at early stage. This paper proposed a novel technique to detect and classify pulmonary nodules based on statistical features for intensity values using support vector machine (SVM). The significance of the proposed technique is, it uses the nodules features in 2D & 3D and also SVM for the classification that is good to classify the nodules extracted from the image. The lung volume is extracted from Lung CT using thresholding, background removal, hole-filling and contour correction of lung lobe. The candidate nodules are extracted and pruned using the rules based on ground truth of nodules. The statistical features for intensity values are extracted from candidate nodules. The nodule data are up-samples to reduce the biasness. The classifier SVM is trained using data samples. The efficiency of proposed CAD system is tested and evaluated using Lung Image Consortium Database (LIDC) that is standard data-set used in CAD Systems for Lungs Nodule classification. The results obtained from proposed CAD system are good as compare to previous CAD systems. The sensitivity of 96.31% is achieved in the proposed CAD system. 相似文献
Fault management and security of computer networks present new challenges of increasing complexity. Decision procedures for fault diagnosis, security-related threats, and follow-up actions must, however, be evaluated on the basis of sound theoretical foundations and economic costs of various strategies. This paper presents a minimum expected cost solution for fault diagnosis and corrective actions. Several notions new to fault management are introduced. The methodology is applicable to both non-malicious and malicious faults. As a novel security-related application, the problem of choosing between two strategies for containing the spread of network worms is discussed. 相似文献
Due to limited depth-of-field of digital single-lens reflex cameras, the scene content within a limited distance from the imaging plane remains in focus while other objects closer to or further away from the point of focus appear as blurred (out-of-focus) in the image. Multi-Focus Image Fusion can be used to reconstruct a fully focused image from two or more partially focused images of the same scene. In this paper, a new Fuzzy Based Hybrid Focus Measure (FBHFM) for multi-focus image fusion has been proposed. Optimal block size is very critical step for multi-focus image fusion. Particle Swarm Optimization (PSO) algorithm has been used to find optimal size of the block of the images for extraction of focus measure features. After finding optimal blocks, three focus measures Sum of Modified Laplacian, Gray Level Variance and Contrast Visibility has been extracted and combined these focus measures by using intelligent fuzzy technique. Fuzzy based hybrid intelligent focus values were estimated using contrast visibility measure to generate focused image. Different sets of multi-focus images have been used in detailed experimentation and compared the results with state-of-the-art existing techniques such as Genetic Algorithm (GA), Principal Component Analysis (PCA), Laplacian Pyramid discrete wavelet transform (DWT), and aDWT for image fusion. It has been found that proposed method performs well as compare to existing methods.
Energy production from a coblended mixture of biosolids and food waste was optimised for hydrogen and methane production. Four different blends were prepared by varying the carbohydrate : protein (carb : pro) ratios. The biosolids contained a low carbohydrate fraction and so was not suitable for hydrogen production when used alone. However coblending this waste with a carbohydrate‐enriched food waste produced a greater hydrogen yield, making this option viable. Batch studies showed that the optimised mix had a biosolids concentration of 25.7% (w/w). The largest hydrogen yield of 198.5 mL/gVSremoved was observed when the carb : pro was 2.78, and this was threefold higher than the other carb : pro ratios evaluated in this study. The digestate recovered after hydrogen recovery had a C : N of 17.5, which is in the ideal range for methane production. The biochemical methane potential test showed a methane yield of 239 mL/gVSremoved, and the total volatile solids destruction following two‐phase hydrogen and methane production was 93%. 相似文献
An empirical model for the estimation of solar energy on the basis of Angstrom's model is proposed in this work. Seven regression equations are developed by using different meteorological parameters such as mean sunshine duration per hour, temperature, relative humidity, wind speed, and rainfall. The performance of the model is determined on the basis of statistical indicators like correlation coefficient(r), coefficient of determination (R2), root mean square error (RMSE), mean percentage error (MPE), and mean bias error (MBE). The results show that the equation with the highest value of r, R2 and the least value of RMSE, MPE, and MBE provides better results. 相似文献
Ferroelectric materials owning a polymorphic nanodomain structure usually exhibit colossal susceptibilities to external mechanical, electrical, and thermal stimuli, thus holding huge potential for relevant applications. Despite the success of traditional strategies by means of complex composition design, alternative simple methods such as strain engineering have been intensively sought to achieve a polymorphic nanodomain state in lead‐free, simple‐composition ferroelectric oxides in recent years. Here, a nanodomain configuration with morphed structural phases is realized in an epitaxial BaTiO3 film grown on a (111)‐oriented SrTiO3 substrate. Using a combination of experimental and theoretical approaches, it is revealed that a threefold rotational symmetry element enforced by the epitaxial constraint along the [111] direction of BaTiO3 introduces considerable instability among intrinsic tetragonal, orthorhombic, and rhombohedral phases. Such phase degeneracy induces ultrafine ferroelectric nanodomains (1–10 nm) with low‐angle domain walls, which exhibit significantly enhanced dielectric and piezoelectric responses compared to the (001)‐oriented BaTiO3 film with uniaxial ferroelectricity. Therefore, the finding highlights the important role of epitaxial symmetry in domain engineering of oxide ferroelectrics and facilitates the development of dielectric capacitors and piezoelectric devices. 相似文献