Hot carrier analysis in low-temperature poly-Si thin-film transistors using pico-second time-resolved emission microscope

We have analyzed degradation of N-channel thin-film-transistor (TFT) under dynamic stress using a pico-second time-resolved emission microscope. We have successfully detected emission at pulse fall edge for the first time. Emission intensity increased with the decrease of pulse fall time. As the degradation depended on the pulse fall time, this dependence clearly illustrates that hot electrons are the dominant cause of the degradation under dynamic stress. Based on these dependences, we proposed a model considering electron traps in the poly-Si.     

Requirement for transglutaminase in progesterone-induced decidualization of human endometrial stromal cells

Differentiation of endometrial stromal cells (decidualization) is essential for embryo implantation and maintenance of pregnancy. By sequential complementary DNA subtractive hybridization, one of the messenger RNAs (mRNA) induced by progesterone in human endometrial stromal cells decidualized in vitro was identified as that of a tissue transglutaminase type II (TGase). TGase mRNA was induced within 6 h after the addition of progesterone to the culture, and the effect was dose dependent. Both the TGase inhibitor monodansylcadaverine and oligodeoxynucleotide complementary to the TGase mRNA inhibited the decidualization, as assessed by PRL production and morphological transformation. Expression of TGase mRNA in human decidua and endometria exposed to high levels of progesterone in vivo was demonstrated by Northern blotting and in situ hybridization. These data suggest that TGase is necessary for the decidualization of human endometrial stromal cells and that clarification of the mechanism of action of TGase will facilitate further insight into the diagnosis and treatment of infertility.     

Numerical simulation of parallel-plate particle separator for estimation of charge distribution of PM2.5

A numerical simulation of an instrument that is used to measure the charging state of PM2.5 is conducted in order to clarify its measurement uncertainty and to improve its performance. The instrument, a parallel-plate particle separator (PPPS), is designed to classify aerosol particles according to their charging states and measure their quantities. The trajectories of submicron particles in the PPPS are numerically analyzed using the Lagrangian particle tracking method, taking into account the Brownian force and the electrostatic force. First, it is confirmed that the deterioration in the classification accuracy observed in the experiment is due to Brownian diffusion. The optimal condition that improves the accuracy is investigated through a parametric study by varying the balance of flow rates at the inlets, the geometry of the inlet and exit sections, and the applied voltage. It is found that decreasing the flow rate of the central inlet for aerosol or narrowing the central inlet improves the accuracy. The dependence of the accuracy on the flow rate is found to be in accordance with the experimental results. For charged particles, an optimum voltage that maximizes the classification accuracy is found. On the basis of the simulation results, we propose a method to determine the charge distribution of aerosol from the number of particles counted at each exit of the PPPS. In the test assuming aerosol in the air, the charge distribution determined from the number count at the exits is found to perfectly agree with the charge distribution specified at the inlet.

Copyright © 2019 American Association for Aerosol Research     

Negative emotion recognition using multimodal physiological signals for advanced driver assistance systems

Artificial Life and Robotics - Recent advanced driver assistance systems’ (ADASs) control cars to avoid accidents, but few of them consider driver’s comfort. To realize comfortable...     

Translational lemmas for DLOGTIME-uniform circuits,alternating TMs,and PRAMs

We present translational lemmas for the three standard models of parallel computation, and apply them to obtain tight hierarchy results. It is shown that, for arbitrarily small rational constant , (i) there is a language which can be accepted by a -uniform circuit family of depth and size but not by any -uniform circuit family of depth and size , (ii) there is a language which can be accepted by a -time -space ATM with l worktapes but not by any -time -space ATM with the same l worktapes if the number of tape symbols is fixed, and (iii) there is a language which can be accepted by a -time PRAM with processors but not by any -time PRAM with processors. Here, c > 0, d ≥ 1, r ₁ > 1, and r ₂ ≥ 1 are arbitrary rational constants, and l ≥ 2 is an arbitrary integer. Preliminary versions of different parts of this paper appeared in Proc. MCU 2004 (LNCS 3354) and Proc. FCT 2005 (LNCS 3623).     

Uniformity of gallium doped zinc oxide thin film prepared by pulsed laser deposition

Recently, transparent conducting oxide thin films have attracted attention for the application to transparent conducting electrodes. In this work, we evaluated the uniformity of electrical, optical and structural properties for gallium doped zinc oxide thin films prepared on the 10 × 10 cm² silica glass substrate by pulsed laser deposition. The resistivity, carrier concentration, mobility, bonding state and atomic composition of the film were uniform along in-plane and depth direction over the 10 × 10 cm² area of the substrate. The film showed the average transmittance of 81-87%, resistivity of 1.4 × 10^− 3 Ω cm, carrier concentration of 9.7 × 10²⁰/cm³ and mobility of 5 cm²/Vs in spite of the amorphous X-ray diffraction pattern. The gradual thickness distribution was found, however, the potential for large-area and low temperature deposition of transparent conducting oxide thin film using pulsed laser deposition method was confirmed.     

A master-slave control system for a semi-autonomous underwater vehicle-manipulator system

Underwater vehicle-manipulator systems (UVMS) are expected to play an important role in ocean exploration. It is considered that UVMS will be operated by both automatic and manual control. We have proposed an automatic control method. In this article, we propose a master-slave system for a UVMS. The effectiveness of the proposed master-slave control system is demonstrated by using a floating underwater robot with a 2-link manipulator.     

Preparation and mesostructure control of highly ordered zirconia particles having crystalline walls

Mesostructured zirconia particles having monoclinic-type crystalline walls were prepared using a low-temperature crystallization technique. Crystalline zirconia particles with highly-ordered mesostructures were obtained through the sol–gel process of zirconium sulfate tetrahydrate at 333 K in the presence of molecular self-assemblies of cetyltrimethylammonium bromide (CTAB) or mixtures of CTAB and anionic molecules such as sodium dodecyl sulfate and sodium p-toluenesulfonate. Variations in the molar ratios of CTAB and the chemical species of anionic molecules led to the variations in the periods of highly-ordered zirconia having crystalline walls. Calcination of the mesostructured zirconia particles prepared using templates consisting solely of CTAB yielded crystalline mesoporous zirconia particles.     

Preparation of Morphology‐Controlled Plate‐Like Sodium Niobate Particles by Hydrothermal Synthesis

Sodium niobate (NaNbO₃) particles with plate‐like morphology and hexagonal unit cells were prepared by the hydrothermal method. The result of SEM showed that the hexagonal NaNbO₃ were characterized by plate‐like morphology with a diameter of 5–15 μm and a thickness of 1–2 μm. The crucial influences on the morphology and crystal phase of the NaNbO₃, such as concentration of [OH^?], surfactant, and K⁺:Na⁺ ratio, were established. By further calcination treatment, the plate‐like hexagonal NaNbO₃ particles could be completely transformed into perovskite structure without morphology change. The XRD and EBSD results indicate that the major face of the calcined particles is parallel to the crystallographic (001)_pc (pseudo cubic index) plane. Compared with the traditional high‐temperature molten salt method, this work provides a simpler way to prepare the template for fabricating textured ceramics.