A New Hand-Held Microsystem Architecture for Biological Analysis

This paper presents a hand-held microsystem based on new fully integrated magnetoresistive biochips for biomolecular recognition (DNA hybridization, antibody antigen interaction, etc.). Magnetoresistive chip surfaces are chemically treated, enabling the immobilization of probe biomolecules such as DNA or antibodies. Fluid handling is also integrated in the biochip. The proposed microsystem not only integrates the biochip, which is an array of 16times16 magnetoresistive sensors, but it also provides all the electronic circuitry for addressing and reading out each transducer. The proposed architecture and circuits were specifically designed for achieving a compact, programmable and portable microsystem. The microsystem also integrates a hand-held analyzer connected through a wireless channel. A prototype of the system was already developed and detection of magnetic nanoparticles was obtained. This indicates that the system may be used for magnetic label based bioassays     

Characterization of the Residence Time Distribution in Spray Dryers

In this work it is presented a study on the residence time distribution (RTD) of particles in a co-current pilot-plant spray dryer operated with a rotary atomization system. A nuclear technique is applied to investigate the RTD responses of spray dryers. The methodology is based on the injection of a radioisotope tracer in the feed stream followed by the monitoring of its concentration at the outlet stream. The experiments were performed during the drying of aqueous suspensions of gadolinium oxide. The RTD responses obtained experimentally presented good reproducibility, indicating that the technique applied is well suited to investigating fluid-dynamics of spray dryers. In addition to the experimental investigation, a mathematical model was used to describe the RTD experimental curves.     

Simultaneous sulfide and acetate oxidation under denitrifying conditions using an inverse fluidized bed reactor

BACKGROUND: Simultaneous removal of sulfur, nitrogen and carbon compounds from wastewaters is a commercially important biological process. The objective was to evaluate the influence of the CH₃COO^?/NO₃^? molar ratio on the sulfide oxidation process using an inverse fluidized bed reactor (IFBR). RESULTS: Three molar ratios of CH₃COO^?/NO₃^? (0.85, 0.72 and 0.62) with a constant S^2?/NO₃^? molar ratio of 0.13 were evaluated. At a CH₃COO^?/NO₃^? molar ratio of 0.85, the nitrate, acetate and sulfide removal efficiencies were approximately 100%. The N₂ yield (g N₂ g^?1 NO₃^?‐N consumed) was 0.81. Acetate was mineralized, resulting in a yield of 0.65 g inorganic‐C g^?1 CH₃COO^?‐C consumed. Sulfide was partially oxidized to S⁰, and 71% of the S^2? consumed was recovered as elemental sulfur by a settler installed in the IFBR. At a CH₃COO^?/NO₃^? molar ratio of 0.72, the efficiencies of nitrate, acetate and sulfide consumption were of 100%, with N₂ and inorganic‐C yields of 0.84 and 0.69, respectively. The sulfide was recovered as sulfate instead of S⁰, with a yield of 0.92 g SO₄^2?‐S g^?1 S^2? consumed. CONCLUSIONS: The CH₃COO^?/NO₃^? molar ratio was shown to be an important parameter that can be used to control the fate of sulfide oxidation to either S⁰ or sulfate. In this study, the potential of denitrification for the simultaneous removal of organic matter, sulfide and nitrate from wastewaters was demonstrated, obtaining CO₂, S⁰ and N₂ as the major end products. Copyright © 2008 Society of Chemical Industry     

Three-dimensional fracture simulation with a single-domain,direct boundary element formulation

An efficient hypersingular boundary integral equation method for three-dimensional fracture mechanics was presented in a previous paper. The details of the numerical implementation of this method are further discussed herein. In particular, an algorithm for achieving the required differentiability of the crack surface displacement function is discussed. To illustrate the utility of the method, computational results for several strongly interacting multiple-crack geometries are presented. The calculated stress intensity factors are in excellent agreement with those obtained by an approximate analytical method due to Kachanov and Laures.     

Microstructural and textural characterization of a hot-rolled IF steel

The present paper reports the experimental results on the microstructural and textural characterization of a hot-rolled IF steel. The IF steel was hot-rolled in multiple passes in the austenitic field (1,070 °C) followed by air-cooling. SEM, TEM, and LOM were used to image the microstructure of the material. The global texture was determined by X-ray diffraction (XRD) technique. The mesotexture of selected regions was investigated by electron backscatter diffraction (EBSD). Results show the presence of a diffuse (nearly random) and weak texture in the hot-band that consists of recrystallized polygonal grains and subgrains. The fraction of boundaries with misorientations comprised in the interval 2° ≤ ψ < 15° was found to be lower than 5%. It can be concluded that these low angle boundaries and the presence of subgrains can be associated to the existence of a few areas softened by recovery during or after hot rolling in austenitic field.     

Total and acid-soluble fluoride content of infant cereals, beverages and biscuits from Brazil

Total fluoride (TF) and HCl 0.01 M ('gastric juice')-soluble fluoride (SF) were analysed in infant foods, beverages and calcium-rich biscuits. Samples were divided into seven categories: children cereals (A), chocolate-flavoured milk (B), soy beverages (C), filled biscuits (D), non-filled biscuits (E), wafer biscuits (F) and corn starch biscuits (G). Mean TF concentrations ± SD (amplitude, unit µg F ml^-1 or µg F g^-1) were: (A) 4.25 ± 3.04 (0.20 - 7.84, n = 6); (B) 0.34 ± 0.47 (0.05-1.27, n = 6); (C) 0.15 ± 0.07 (0.09-0.29, n = 8); (D) 8.44 ± 1.76 (7.65-10.47, n = 4); (E) 12.41 ± 1.15 (10.69-13.68, n = 4); (F) 0.35 ± 0 (0.34-0.36, n = 4) and (G) 7.77 ± 1.12 (6.86-8.68, n = 2). Five samples of cereals, one sample of chocolate-flavoured milk and 10 samples of biscuits were analysed for SF. In cereals analysed for SF, all fluoride was soluble, while for the chocolate-flavoured milk, approximately 50% of TF was soluble. Regarding the biscuits analysed for SF approximately 20% of TF was soluble. It was observed that some of the cereals and beverages, and most of the biscuits analysed, might be important contributors to total daily fluoride intake. When consumed just once per day, cereals and beverages might supply up to 25% of the maximum recommended daily fluoride intake (0.07 mg F kg^-1 body weight) for a 2-year-old child (12 kg). For the filled, non-filled and corn starch biscuits, when 3, 32 or 20 units of them, respectively, are consumed just once per day, they may supply up to 16% of the maximum recommended daily fluoride intake. However, only approximately 25% of fluoride absorption occurs from the stomach and 75% from the small intestine. Therefore, a higher fluoride bioavailability is possible.     

Multi-step transformation in numerical renormalization group

We compute the temperature dependent magnetic susceptibility of the single-impurity, two-channel Anderson model with an alternative multi-step numerical renormalization-group transformation, previously applied only to the two-impurity single-channel Kondo model. Compared with the traditional transformation, the new procedure requires substantially less memory and computational time, and opens therefore perspectives for the application of the numerical renormalization-group procedure to more complex Hamiltonians.     

Genotoxic effect of Physalis angulata L. (Solanaceae) extract on human lymphocytes treated in vitro

Physalis angulata L (Solanaceae) is a medicinal plant from North of Brazil, whose different extracts and infusions are commonly used in the popular medicine for the treatment of malaria, asthma, hepatitis, dermatitis and rheumatism. However, the genotoxic effects of P. angulata on human cells is not well known. The main purpose of the present study was to evaluate the in vitro genotoxic effects of aqueous extract of P. angulata using the comet assay and the micronucleus assay in human lymphocytes provided from 6 healthy donors. Treatments with P. angulata extracts were performed in vitro in order to access the extent of DNA damage. The comet assay has shown that treatments with P. angulata at 0.5, 1.0, 2.0, 3.0 and 6.0 microg/mL in culture medium were genotoxic. Lymphocytes treated with P. angulata at the concentrations of 3.0 and 6.0 microg/mL in culture medium showed a statistically significant increase in the frequency of micronucleus (p<0.05), however, the cytokinesis blocked proliferation index (CBPI) was not decreased after P. angulata treatment. In conclusion, the present work demonstrated the genotoxic effects of P. angulata extract on human lymphocytes in vitro.     

Gas Permeability of Wetwood and Normal Wood of Subalpine Fir in Relation to Drying

Subalpine fir (Abies lasiocarpa Hook) lumber containing wetpockets (wetwood) was used for the measurements of gas permeability and the results were then compared to the gas permeability of normal wood, which was free of the wetpockets. The impacts of pretreatment methods were also investigated, including steaming at green condition, steaming at fiber saturation point (FSP), microwave treatment, and radio-frequency treatment. Results from this study demonstrated that both the transverse and the longitudinal gas permeability of subalpine fir wetwood are greater than that of normal wood. There is no significant change in the permeability after 4-h steaming pretreatment at green condition and at FSP. The impacts of microwave and radio-frequency pretreatments were not significant, but the findings cannot be generalized because they may depend on the power intensity applied.